<![CDATA[N8N & NocoDB]]>Hello!

I can access N8n & Nocodb from my laptop and it works fine.
But when I try to connect Nocodb from N8n through API(Both are on the same Cloudron server) I get the below error on N8n.

Just FYI, Ports 80 & 443 are not open on my router.
I have all my cloudron domains point to the cloudron server.
So locally I can access Cloudron based app sites.

Any inputs would be helpful.

ERROR: getaddrinfo ENOTFOUND nocodb.xyz.us
getaddrinfo ENOTFOUND nocodb.xyz.us

Thank you!

]]>https://forum.cloudron.io/topic/9346/n8n-nocodbRSS for NodeSun, 12 Apr 2026 17:13:28 GMTSun, 04 Jun 2023 13:08:12 GMT60<![CDATA[Reply to N8N & NocoDB on Thu, 15 Jun 2023 20:49:08 GMT]]>@girish Thank you!

]]>https://forum.cloudron.io/post/68392https://forum.cloudron.io/post/68392Thu, 15 Jun 2023 20:49:08 GMT<![CDATA[Reply to N8N & NocoDB on Tue, 06 Jun 2023 06:46:50 GMT]]>@jagadeesh-s2104 If I understand your setup correctly, you have a custom DNS server which resolves your domain . All your other machines work fine because they use the custom DNS server.

Cloudron uses it's own DNS resolver called unbound. You can configure unbound to use your custom DNS server. See https://docs.cloudron.io/networking/#internal-dns-server . Once configured, try the host command again and hopefully it works.

]]>https://forum.cloudron.io/post/67790https://forum.cloudron.io/post/67790Tue, 06 Jun 2023 06:46:50 GMT<![CDATA[Reply to N8N & NocoDB on Mon, 05 Jun 2023 16:35:46 GMT]]>@girish Thank you!

It says not found.

I have Primary and Secondary DNS Server which points the nocodb domain to Cloudron and it works fine when I access it from LAN.
But from Cloudron server it is not resolving. Meaning my DNS server that is set to all client through DHCP is not working for Cloudron Server.

I don't want to open port 80/443 to cloudron - so I use it this way.
All apps works fine, but this is the first time I'm trying to connect one cloudron app from another.

What is the best way to tell Cloudron to use my internal DNS instead of it's own? Thank you!

Edit : Can I use the DNS section of https://docs.cloudron.io/troubleshooting/ ?

]]>https://forum.cloudron.io/post/67765https://forum.cloudron.io/post/67765Mon, 05 Jun 2023 16:35:46 GMT<![CDATA[Reply to N8N & NocoDB on Mon, 05 Jun 2023 11:30:18 GMT]]>@jagadeesh-s2104 ENOTFOUND means the domain is not found (as opposed to not able to connect). On the n8n web terminal, are you able resolve nocodb domain name ? i.e host nocodb.xyz.us . Does that work in the web terminal ?

]]>https://forum.cloudron.io/post/67735https://forum.cloudron.io/post/67735Mon, 05 Jun 2023 11:30:18 GMT<![CDATA[Reply to N8N & NocoDB on Sun, 04 Jun 2023 14:34:38 GMT]]>@warg I'm connecting it from my home and not outside. I can access both the services with the URL from my laptop on my home network.
No problem with that. Only when I add the Url of NocoDB to N8n it gives the error.

]]>https://forum.cloudron.io/post/67668https://forum.cloudron.io/post/67668Sun, 04 Jun 2023 14:34:38 GMT<![CDATA[Reply to N8N & NocoDB on Sun, 04 Jun 2023 13:49:03 GMT]]>When it's not reachable from outside, you shouldn't try to connect from external. Try to use the internal IP address + port. Beside of that, I'm not sure if it works then because so far I'm not familar enough with the networking of Cloudron/Docker.

]]>https://forum.cloudron.io/post/67662https://forum.cloudron.io/post/67662Sun, 04 Jun 2023 13:49:03 GMT