evcc - Package Updates
-
[1.5.1]
- Update evcc to 0.201.1
- Full Changelog
- Config UI: remove references when deleting devices
- Config UI: reset lp smart cost limit
- Lambda: add watchdog
- Loadpoint: fix phase switching incorrectly configured
- OVMS: fix climater
- RCT: refactor retry
- fronius-solarapi-v1: fix pv total energy scale
-
[1.6.0]
- Update evcc to 0.202.0
- Full Changelog
- Add Buderus/Bosch/Junkers (#19977)
- Add Huawei SCharger-7KS-S0 / 22KT-S0 (#19001)
- Add Kermi (#20039)
- Add Tessie (#19881)
- Amperfied: fix phase switching (#20090)
- Config UI: explain poll risks (#20122)
- Config UI: solar tariff configured (#20079)
- Configure Typescript (#19774)
- Cupra: treat "error" charging status as connected (#19982)
- Enever: configurable interval (#19976)
-
-
[1.6.2]
- Update evcc to 0.203.0
- Full Changelog
- Add Mennekes AMTRON 4You (#20425)
- Add Volvo (Connected Car) (#20505)
- Add battery mode api (#20455)
- Add: akkudoktor.net solar forecast (#19434)
- CO2 Forecast: Green Grid Compass (#20452)
- Circuit: fix validateCurrent and validatePower (#20183)
- Circuit: simplify validation (#20364)
- Config UI: add missing translations (#20341)
- Config UI: generate plant id if needed (#20190)
- Config UI: keep mqtt and influx secrets on edit (#19956)
-
[1.6.4]
- Update evcc to 0.203.2
- Full Changelog
- Add SunSpec meter (#19624)
- Easee: add more unittests (#20719)
- Easee: remove custom logic based on erratic lifetime_energy (#20668)
- Easee: remove outdated special handling of SessionEnergy (#20659)
- Easee: wait for essential state during boot (#20646)
- Green Grid Compass: adjust regions (#20623)
- Green Grid Compass: fix tariff type
- HomeWizard: add charge usage (#20633) (#20634)
- LG ESS: support multiple instances (#20731)
- Loadpoint: prevent bypassing pv timer (#20564)
-
[1.6.5]
- Update evcc to 0.203.3
- Full Changelog
- Akkudoktor: deprecate as unreliable
- Battery Settings UI: improve readability (#20793)
- Config UI: Modbus Comset 8N2, i18n (#20830)
- Config UI: allow setting priority=0 (#20795)
- Easee: revert wait for essential state during boot (#20646)
- Shelly: prefer meter over switch for measurements (#20835)
- Shelly: use TotalIn for sml totalenergy (#20826)
- Shelly: use methods instead of models (#20802)
- Sunspec: add 1p meter (#20797)
- Tibber: pass more descriptive user agent when connecting (#20841
-
[1.6.6]
- Update evcc to 0.203.4
- Full Changelog
- Green Grid Compass: fix type (#20904)
- KEBA: Add KeContact P40 models (#20860)
- Loadpoint: allow fine-grained battery boost (#19385)
- Modbus: use 10s timeout
- Planner: add precondition phase before departure (#20431)
- Shelly: re-enable PM Mini Gen3 (#20855)
- Tibber: increase websocket read timeout (#20895)
- Vestel: add RFID support (#20858)
-
[1.6.7]
- Update evcc to 0.203.5
- Full Changelog
- 54162f0 SGReady: use standardised modes (BC) (#20747)
- 422a58d Add Carlo Gavazzi EM24_E1 (Ethernet version) (#21027)
- ed644b9 Add Kathrein charger (#20412)
- 8ce9ff4 Add Plugchoice/ Volt Time chargers (#20967)
- ac6236d Akkudoctor: set default interval to 2h (#20954)
- 3629c20 Config UI: hide duration example (#21002)
- ed88746 Easee: wait for optional state during boot (#20871)
- d171a04 Forecast UI: negative prices (#20977)
- 473747d Http: mark non-success status errors as permanent
- 523e3ee Http: use password as fallback for bearer token
-
[1.6.8]
- Update evcc to 0.203.6
- Full Changelog
- Add FoxESS H3-Smart (#21227)
- Add Victron VRM solar forecast (#21058)
- Add fox-ess-h3-smart inverters (#21176)
- Add free2move eProWallbox (#20743)
- Amber: use sites/:id/prices/current API instead of sites/:id/prices API (#21117)
- Bender: add maxCurrentMillis and phases1p3p (#20755)
- Config UI: add loadpoint required hint (#21164)
- Config UI: fix boolean default (#21233)
- Config UI: fix boolean default (#21235)
- Cupra: hide soc limit in presence of profiles
-
[1.7.0]
- Update evcc to 0.204.0
- Full Changelog
- Config UI: add user-defined devices (#20966)
- AC Thor: add scale factor (#21406)
- Add Daikin Home Hub (#21298)
- Add Home Assistant Switch as switchsockets charger (#21358)
- Add IOmeter (#21242)
- Add Marstek Venus battery (#21487)
- Add Sigenergy (#21302)
- Add Viessmann (#20111)
- Add Wago 879-30xx (#21157)
- Add esphome-dlms-austria meter (#21375)
-
[1.7.1]
- Update evcc to 0.204.1
- Full Changelog
- Config UI: cleanup circuit references (#21525)
- Config UI: make circuit/vehicle refs changeable (#21539)
- Config UI: make lpc circuit visible (#21526)
- Homeassisstant Switch: require power entity (#21537)
- Loadpoint: publish charge voltages also with phase switching (#21510)
- Phoenix EM Eth: fix panic
- Renault: fix for incomplete json payload in MY24 wakeupmode (#21562)
- Revert "wip"
- Sessions: add year csv export (#21555)
- Vestel: decorate RFID based on version (#21519)
-
[1.7.2]
- Update evcc to 0.204.2
- Full Changelog
- Add Luxtronik 2.1 (#21516)
- Add Sungrow AC22E (#21676)
- EEBus hems: fix failsafe error after 10 seconds (#21675)
- Kathrein: fix charge duration/ misc issues (#21585)
- Loadpoint: always publish charge voltages (#21641)
- Luxtronik: fix scale for temperature, add templimit support (#21665)
- Plugins: add meter scale
- Polestar: fix api
- Remove unused attributes
- UI: add restart button to fatal error banner (#21688)
-
[1.7.3]
- Update evcc to 0.204.3
- Full Changelog
- Site: remove cuircuit and maxGridSupplyWhileBatteyCharging (BC) (#21838)
- Add Daheimladen Pro (#21893)
- Add SGready charger with boost relay (#21820)
- Amber: update docs to clarify required settings (#21809)
- Autel: clarify firmware version (#21872)
- Config UI: filter parameters by usage (#21821)
- Daheimladen: fix currents
- Fronius: support Solar API v1 changes (#21651)
- Loadpoint: publish vehicleTitle again (#21720)
- Phoenix: fix EM/EV-ETH measurand scaling (#21739)
-
-
[1.8.0]
- Update evcc to 0.205.0
- Full Changelog
- evcc now allows LLMs like Claude or Gemini to interact using the Model Context Protocol api. See #22121 for details.
- During the next release cycle, starting with the upcoming nightly version, the evcc REST API response will change. See https://github.com/evcc-io/evcc/pull/22299 for details.
- Add AI support via model context protocol api (#22121)
- Add TeslaFi vehicle (#22245)
- Add demo solar forecast template (#21971)
- Add smart feed-in priority (#21813)
- Battery grid charge non experimental (#22090)
- Config UI: add heating support (#22177)
- Config UI: general settings wrap (#22276)
- Daheimladen: clarify models
