evcc - Package Updates

[Package Updates]

[1.6.4]

• Update evcc to 0.203.2
• Full Changelog
• Add SunSpec meter (#19624)
• Easee: add more unittests (#20719)
• Easee: remove custom logic based on erratic lifetime_energy (#20668)
• Easee: remove outdated special handling of SessionEnergy (#20659)
• Easee: wait for essential state during boot (#20646)
• Green Grid Compass: adjust regions (#20623)
• Green Grid Compass: fix tariff type
• HomeWizard: add charge usage (#20633) (#20634)
• LG ESS: support multiple instances (#20731)
• Loadpoint: prevent bypassing pv timer (#20564)

[Package Updates]

[1.6.5]

• Update evcc to 0.203.3
• Full Changelog
• Akkudoktor: deprecate as unreliable
• Battery Settings UI: improve readability (#​20793)
• Config UI: Modbus Comset 8N2, i18n (#​20830)
• Config UI: allow setting priority=0 (#​20795)
• Easee: revert wait for essential state during boot (#​20646)
• Shelly: prefer meter over switch for measurements (#​20835)
• Shelly: use TotalIn for sml totalenergy (#​20826)
• Shelly: use methods instead of models (#​20802)
• Sunspec: add 1p meter (#​20797)
• Tibber: pass more descriptive user agent when connecting (#​20841

[Package Updates]

[1.6.6]

• Update evcc to 0.203.4
• Full Changelog
• Green Grid Compass: fix type (#20904)
• KEBA: Add KeContact P40 models (#20860)
• Loadpoint: allow fine-grained battery boost (#19385)
• Modbus: use 10s timeout
• Planner: add precondition phase before departure (#20431)
• Shelly: re-enable PM Mini Gen3 (#20855)
• Tibber: increase websocket read timeout (#20895)
• Vestel: add RFID support (#20858)

[Package Updates]

[1.6.7]

• Update evcc to 0.203.5
• Full Changelog
• 54162f0 SGReady: use standardised modes (BC) (#20747)
• 422a58d Add Carlo Gavazzi EM24_E1 (Ethernet version) (#21027)
• ed644b9 Add Kathrein charger (#20412)
• 8ce9ff4 Add Plugchoice/ Volt Time chargers (#20967)
• ac6236d Akkudoctor: set default interval to 2h (#20954)
• 3629c20 Config UI: hide duration example (#21002)
• ed88746 Easee: wait for optional state during boot (#20871)
• d171a04 Forecast UI: negative prices (#20977)
• 473747d Http: mark non-success status errors as permanent
• 523e3ee Http: use password as fallback for bearer token

[Package Updates]

[1.6.8]

• Update evcc to 0.203.6
• Full Changelog
• Add FoxESS H3-Smart (#21227)
• Add Victron VRM solar forecast (#21058)
• Add fox-ess-h3-smart inverters (#21176)
• Add free2move eProWallbox (#20743)
• Amber: use sites/:id/prices/current API instead of sites/:id/prices API (#21117)
• Bender: add maxCurrentMillis and phases1p3p (#20755)
• Config UI: add loadpoint required hint (#21164)
• Config UI: fix boolean default (#21233)
• Config UI: fix boolean default (#21235)
• Cupra: hide soc limit in presence of profiles

[Package Updates]

[1.7.0]

• Update evcc to 0.204.0
• Full Changelog
• Config UI: add user-defined devices (#20966)
• AC Thor: add scale factor (#21406)
• Add Daikin Home Hub (#21298)
• Add Home Assistant Switch as switchsockets charger (#21358)
• Add IOmeter (#21242)
• Add Marstek Venus battery (#21487)
• Add Sigenergy (#21302)
• Add Viessmann (#20111)
• Add Wago 879-30xx (#21157)
• Add esphome-dlms-austria meter (#21375)

[Package Updates]

[1.7.1]

• Update evcc to 0.204.1
• Full Changelog
• Config UI: cleanup circuit references (#21525)
• Config UI: make circuit/vehicle refs changeable (#21539)
• Config UI: make lpc circuit visible (#21526)
• Homeassisstant Switch: require power entity (#21537)
• Loadpoint: publish charge voltages also with phase switching (#21510)
• Phoenix EM Eth: fix panic
• Renault: fix for incomplete json payload in MY24 wakeupmode (#21562)
• Revert "wip"
• Sessions: add year csv export (#21555)
• Vestel: decorate RFID based on version (#21519)

[Package Updates]

[1.7.2]

• Update evcc to 0.204.2
• Full Changelog
• Add Luxtronik 2.1 (#21516)
• Add Sungrow AC22E (#21676)
• EEBus hems: fix failsafe error after 10 seconds (#21675)
• Kathrein: fix charge duration/ misc issues (#21585)
• Loadpoint: always publish charge voltages (#21641)
• Luxtronik: fix scale for temperature, add templimit support (#21665)
• Plugins: add meter scale
• Polestar: fix api
• Remove unused attributes
• UI: add restart button to fatal error banner (#21688)

[Package Updates]

[1.7.3]

• Update evcc to 0.204.3
• Full Changelog
• Site: remove cuircuit and maxGridSupplyWhileBatteyCharging (BC) (#21838)
• Add Daheimladen Pro (#21893)
• Add SGready charger with boost relay (#21820)
• Amber: update docs to clarify required settings (#21809)
• Autel: clarify firmware version (#21872)
• Config UI: filter parameters by usage (#21821)
• Daheimladen: fix currents
• Fronius: support Solar API v1 changes (#21651)
• Loadpoint: publish vehicleTitle again (#21720)
• Phoenix: fix EM/EV-ETH measurand scaling (#21739)

[Package Updates]

[1.7.4]

• Update evcc to 0.204.5
• Full Changelog
• Add Compleo Solo/Duo (#22013)
• Heatpump: reset session energy when status off (#22032)
• LG ESS Home 8: fix version check for battery (#22029)
• Renault Twingo: add to min current hint for 3p (#22031)
• SGReady: reset session energy when status off (#22014)

[Package Updates]

[1.8.0]

• Update evcc to 0.205.0
• Full Changelog
• evcc now allows LLMs like Claude or Gemini to interact using the Model Context Protocol api. See #22121 for details.
• During the next release cycle, starting with the upcoming nightly version, the evcc REST API response will change. See https://github.com/evcc-io/evcc/pull/22299 for details.
• Add AI support via model context protocol api (#22121)
• Add TeslaFi vehicle (#22245)
• Add demo solar forecast template (#21971)
• Add smart feed-in priority (#21813)
• Battery grid charge non experimental (#22090)
• Config UI: add heating support (#22177)
• Config UI: general settings wrap (#22276)
• Daheimladen: clarify models

[Package Updates]

[1.9.0]

• Update evcc to 0.206.0
• Full Changelog
• Add Em2Go Duo Power charger support
• Add Ochsner BWWP Genius (#22585)
• Add batterX Home (#22476)
• Add co2 grid charge tests (#22444)
• Add demo co2 tariff (#22447)
• Amber: invert feed-in prices to match evcc expectations (#22405)
• Amber: use billing-native resolution, request up to 72 hours ahead (#22538)
• Backup Restore: clarify password (#22411)
• CLI: honor config file as optional (#22398)
• Collect household consumption metrics (#22526)

[Package Updates]

[1.9.1]

• Update evcc to 0.206.1
• Full Changelog
• Config UI: make network port required (#22631)
• E3dc: fix auth errors (#22659)
• Migrate telemetry state to publishing (BC) (#22653)
• MyPV charger: fix charger logic error (#22402)
• OpenAPI: migrate (#22429)
• Revert "Solax: fix energy (#22508)"

[Package Updates]

[1.10.0]

• Update evcc to 0.207.0
• Full Changelog
• The REST API response format has changed. You might need to adjust external integrations. Read more.
• 31d01bc Add Home Assistant Vehicle (#22594)
• a8c16f2 Add dedicated db cache table (#22650)
• 0008f4d Config UI: remove deprecated params for single device (#22669)
• d541dfa REST API: simplify json response by removing result wrapper (BC) (#22299)
• db824ad UI: layout stability status timer (#22662)

[Package Updates]

[1.10.1]

• Update evcc to 0.207.1
• Full Changelog
• Config UI: allow repairing broken loadpoints and site (#22671)
• Config UI: improve sponsor communication (#22683)
• Daheimladen: add enable/disable delay (#22695)
• Home Assistant Vehicle: include common vehicle parameters (#22727)
• Kia/Hyundai: fix login api (#22709)
• Ocpp: fix connector not de-registered (#22113)

[Package Updates]

[1.10.2]

• Update evcc to 0.207.2
• Full Changelog
• Amber: normalise rates to 1-hour slots (#22870)
• Eastron DS100: fix reg power
• Home Assistant Vehicle: add charging_completed & fix parse float (#22756)
• Homeassistant Switch: make power optional (#22750)
• Homeassistant Vehicle: add additional states for Porsche (#22832)
• Homeassistent Vehicle: support for state sensors already providing a valid state code (#22779)
• Hyundai: revert api change (#22833)
• Improve oauth integration (#21266)
• Kia/Hyundai: fix login (#22729)
• Lambda Zewotherm: use "E-Eintrag" mode only (BC) (#22811)

[Package Updates]

[1.10.3]

• Update evcc to 0.207.3
• Full Changelog
• 6d6b12b Add Fronius Verto Plus (#22857)
• 6a29b41 Auth provider: reduce logging (#22998)
• 4ba1db1 Config UI add missing sgready-boost type (#22975)
• de41326 Config UI: fix icon in customer chargers (#22947)
• 4163748 Config UI: improve sponsor token flow (#22989)
• a32acea Config UI: set content-length for backup download (#23002)
• 16a0d10 E3DC: fix retry logic to retry actual requests after reconnection (#23007)
• e8b4ff3 Enphase: make schema configurable (#22996)
• acabbef Fiat: fix panic

[Package Updates]

[1.10.4]

• Update evcc to 0.207.4
• Full Changelog
• Tariffs: add cacheable feature (#23091)
• Integrate external optmizer (experimental) (#22495)
• Ngeso: fix post code not processed
• Shelly: fix tests (#23096)
• Tariff: fix caching templates (#23131)
• Tariffs: fix panic when tariff not initialized

[Package Updates]

[1.10.5]

• Update evcc to 0.207.5
• Full Changelog
• Add LG Therma heatpumps (#23154)
• Add Sigenergy EVAC series charger (#22986)
• Add battery max charge/discharge power (#22944)
• Config UI: add circuit meter options (#23174)
• Loadpoint: add asleep messaging event if wakeup fails (#23116)
• MCP: add request logging (#23216)
• Fix filtering deprecated template params
• Config UI: fix loadpoint phases (#23170)
• Kia: fix login (#23247)
• Sessions UI: fix horizontal scrollbar (#23207