evcc - Package Updates
-
[1.5.1]
- Update evcc to 0.201.1
- Full Changelog
- Config UI: remove references when deleting devices
- Config UI: reset lp smart cost limit
- Lambda: add watchdog
- Loadpoint: fix phase switching incorrectly configured
- OVMS: fix climater
- RCT: refactor retry
- fronius-solarapi-v1: fix pv total energy scale
-
[1.6.0]
- Update evcc to 0.202.0
- Full Changelog
- Add Buderus/Bosch/Junkers (#19977)
- Add Huawei SCharger-7KS-S0 / 22KT-S0 (#19001)
- Add Kermi (#20039)
- Add Tessie (#19881)
- Amperfied: fix phase switching (#20090)
- Config UI: explain poll risks (#20122)
- Config UI: solar tariff configured (#20079)
- Configure Typescript (#19774)
- Cupra: treat "error" charging status as connected (#19982)
- Enever: configurable interval (#19976)
-
-
[1.6.2]
- Update evcc to 0.203.0
- Full Changelog
- Add Mennekes AMTRON 4You (#20425)
- Add Volvo (Connected Car) (#20505)
- Add battery mode api (#20455)
- Add: akkudoktor.net solar forecast (#19434)
- CO2 Forecast: Green Grid Compass (#20452)
- Circuit: fix validateCurrent and validatePower (#20183)
- Circuit: simplify validation (#20364)
- Config UI: add missing translations (#20341)
- Config UI: generate plant id if needed (#20190)
- Config UI: keep mqtt and influx secrets on edit (#19956)
-
-
[1.6.4]
- Update evcc to 0.203.2
- Full Changelog
- Add SunSpec meter (#19624)
- Easee: add more unittests (#20719)
- Easee: remove custom logic based on erratic lifetime_energy (#20668)
- Easee: remove outdated special handling of SessionEnergy (#20659)
- Easee: wait for essential state during boot (#20646)
- Green Grid Compass: adjust regions (#20623)
- Green Grid Compass: fix tariff type
- HomeWizard: add charge usage (#20633) (#20634)
- LG ESS: support multiple instances (#20731)
- Loadpoint: prevent bypassing pv timer (#20564)
-
[1.6.5]
- Update evcc to 0.203.3
- Full Changelog
- Akkudoktor: deprecate as unreliable
- Battery Settings UI: improve readability (#20793)
- Config UI: Modbus Comset 8N2, i18n (#20830)
- Config UI: allow setting priority=0 (#20795)
- Easee: revert wait for essential state during boot (#20646)
- Shelly: prefer meter over switch for measurements (#20835)
- Shelly: use TotalIn for sml totalenergy (#20826)
- Shelly: use methods instead of models (#20802)
- Sunspec: add 1p meter (#20797)
- Tibber: pass more descriptive user agent when connecting (#20841
-
[1.6.6]
- Update evcc to 0.203.4
- Full Changelog
- Green Grid Compass: fix type (#20904)
- KEBA: Add KeContact P40 models (#20860)
- Loadpoint: allow fine-grained battery boost (#19385)
- Modbus: use 10s timeout
- Planner: add precondition phase before departure (#20431)
- Shelly: re-enable PM Mini Gen3 (#20855)
- Tibber: increase websocket read timeout (#20895)
- Vestel: add RFID support (#20858)
-
[1.6.7]
- Update evcc to 0.203.5
- Full Changelog
- 54162f0 SGReady: use standardised modes (BC) (#20747)
- 422a58d Add Carlo Gavazzi EM24_E1 (Ethernet version) (#21027)
- ed644b9 Add Kathrein charger (#20412)
- 8ce9ff4 Add Plugchoice/ Volt Time chargers (#20967)
- ac6236d Akkudoctor: set default interval to 2h (#20954)
- 3629c20 Config UI: hide duration example (#21002)
- ed88746 Easee: wait for optional state during boot (#20871)
- d171a04 Forecast UI: negative prices (#20977)
- 473747d Http: mark non-success status errors as permanent
- 523e3ee Http: use password as fallback for bearer token
-
[1.6.8]
- Update evcc to 0.203.6
- Full Changelog
- Add FoxESS H3-Smart (#21227)
- Add Victron VRM solar forecast (#21058)
- Add fox-ess-h3-smart inverters (#21176)
- Add free2move eProWallbox (#20743)
- Amber: use sites/:id/prices/current API instead of sites/:id/prices API (#21117)
- Bender: add maxCurrentMillis and phases1p3p (#20755)
- Config UI: add loadpoint required hint (#21164)
- Config UI: fix boolean default (#21233)
- Config UI: fix boolean default (#21235)
- Cupra: hide soc limit in presence of profiles
-
[1.7.0]
- Update evcc to 0.204.0
- Full Changelog
- Config UI: add user-defined devices (#20966)
- AC Thor: add scale factor (#21406)
- Add Daikin Home Hub (#21298)
- Add Home Assistant Switch as switchsockets charger (#21358)
- Add IOmeter (#21242)
- Add Marstek Venus battery (#21487)
- Add Sigenergy (#21302)
- Add Viessmann (#20111)
- Add Wago 879-30xx (#21157)
- Add esphome-dlms-austria meter (#21375)
-
[1.7.1]
- Update evcc to 0.204.1
- Full Changelog
- Config UI: cleanup circuit references (#21525)
- Config UI: make circuit/vehicle refs changeable (#21539)
- Config UI: make lpc circuit visible (#21526)
- Homeassisstant Switch: require power entity (#21537)
- Loadpoint: publish charge voltages also with phase switching (#21510)
- Phoenix EM Eth: fix panic
- Renault: fix for incomplete json payload in MY24 wakeupmode (#21562)
- Revert "wip"
- Sessions: add year csv export (#21555)
- Vestel: decorate RFID based on version (#21519)
-
[1.7.2]
- Update evcc to 0.204.2
- Full Changelog
- Add Luxtronik 2.1 (#21516)
- Add Sungrow AC22E (#21676)
- EEBus hems: fix failsafe error after 10 seconds (#21675)
- Kathrein: fix charge duration/ misc issues (#21585)
- Loadpoint: always publish charge voltages (#21641)
- Luxtronik: fix scale for temperature, add templimit support (#21665)
- Plugins: add meter scale
- Polestar: fix api
- Remove unused attributes
- UI: add restart button to fatal error banner (#21688)
-
[1.7.3]
- Update evcc to 0.204.3
- Full Changelog
- Site: remove cuircuit and maxGridSupplyWhileBatteyCharging (BC) (#21838)
- Add Daheimladen Pro (#21893)
- Add SGready charger with boost relay (#21820)
- Amber: update docs to clarify required settings (#21809)
- Autel: clarify firmware version (#21872)
- Config UI: filter parameters by usage (#21821)
- Daheimladen: fix currents
- Fronius: support Solar API v1 changes (#21651)
- Loadpoint: publish vehicleTitle again (#21720)
- Phoenix: fix EM/EV-ETH measurand scaling (#21739)
-
-
[1.8.0]
- Update evcc to 0.205.0
- Full Changelog
- evcc now allows LLMs like Claude or Gemini to interact using the Model Context Protocol api. See #22121 for details.
- During the next release cycle, starting with the upcoming nightly version, the evcc REST API response will change. See https://github.com/evcc-io/evcc/pull/22299 for details.
- Add AI support via model context protocol api (#22121)
- Add TeslaFi vehicle (#22245)
- Add demo solar forecast template (#21971)
- Add smart feed-in priority (#21813)
- Battery grid charge non experimental (#22090)
- Config UI: add heating support (#22177)
- Config UI: general settings wrap (#22276)
- Daheimladen: clarify models
-
[1.9.0]
- Update evcc to 0.206.0
- Full Changelog
- Add Em2Go Duo Power charger support
- Add Ochsner BWWP Genius (#22585)
- Add batterX Home (#22476)
- Add co2 grid charge tests (#22444)
- Add demo co2 tariff (#22447)
- Amber: invert feed-in prices to match evcc expectations (#22405)
- Amber: use billing-native resolution, request up to 72 hours ahead (#22538)
- Backup Restore: clarify password (#22411)
- CLI: honor config file as optional (#22398)
- Collect household consumption metrics (#22526)
-
-
[1.10.0]
- Update evcc to 0.207.0
- Full Changelog
- The REST API response format has changed. You might need to adjust external integrations. Read more.
31d01bcAdd Home Assistant Vehicle (#22594)a8c16f2Add dedicated db cache table (#22650)0008f4dConfig UI: remove deprecated params for single device (#22669)d541dfaREST API: simplify json response by removing result wrapper (BC) (#22299)db824adUI: layout stability status timer (#22662)
-
[1.10.1]
- Update evcc to 0.207.1
- Full Changelog
- Config UI: allow repairing broken loadpoints and site (#22671)
- Config UI: improve sponsor communication (#22683)
- Daheimladen: add enable/disable delay (#22695)
- Home Assistant Vehicle: include common vehicle parameters (#22727)
- Kia/Hyundai: fix login api (#22709)
- Ocpp: fix connector not de-registered (#22113)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login