Help with Wasabi mounting

[robi]

See this thread:
https://forum.cloudron.io/topic/3463/nextcloud-external-storage-mounting-external-services-with-rclone/

[privsec]

@robi so this doesn’t really answer my question.

I want my wasabi bucket to contain all of my nextcloud data. So the app directory and all is on wasabi.

I don’t want an external drive connected for remote storage.

If I have 100 users and they all are allowed 50gb of space, then I would need a minimum of 5tb of space. My 180gb ssd in my vps won’t cut it.
Since nextcloud natively stores everything on the app directory, I need to move that to a block storage solution.

[privsec]

Under resources/storage for nextcloud is where I’d assume I would add a block storage to replace my current data directory. But I don’t see how to do this.

@privsec said in Help with Wasabi mounting:

@robi so this doesn’t really answer my question.

I want my wasabi bucket to contain all of my nextcloud data. So the app directory and all is on wasabi.

I don’t want an external drive connected for remote storage.

If I have 100 users and they all are allowed 50gb of space, then I would need a minimum of 5tb of space. My 180gb ssd in my vps won’t cut it.
Since nextcloud natively stores everything on the app directory, I need to move that to a block storage solution.

[robi]

@privsec That's not the place to add it. (NC)

The place to look into adding it is in the container for NC.

From CL UI, in the NC App Config > Resources > Storage section is where you would move the App storage to.

To make this happen you need to have a filelsystem based mount point.

This is where rclone comes in which can mount remote filesystems and object stores into the local filesystem.

See it now?

[privsec]

@robi
That is my problem, I believe.

My system, for whatever reason wont allow any mountpoints.

I have followed these guides
https://wasabi-support.zendesk.com/hc/en-us/articles/115001744651-How-do-I-use-S3FS-with-Wasabi-
https://www.interserver.net/tips/kb/mount-s3-bucket-centos-ubuntu-using-s3fs/
And neither of them are working. Ill have to check out Rclone as nothing else is working at the moment.

[privsec]

@robi
So I have installed rclone, and went through the config step. However, I am getting this
This is the same, if not similar error message I was getting without rclone.

What resolves this?

[robi]

@privsec copy/paste issue? double check connecting via mountainduck or similar desktop S3FS/Object Storage tool to validate credentials.

[privsec]

@robi I manually type it in. In case the key is bad or wrong I just generated a new key and I will try with mountainduck to ensure its working

[robi]

@privsec Avoid manually typing it in, as it is very error prone. Sometimes the keys have 'Il' and you can't tell which is the L and which is the i.

[privsec]

@robi I disabled ssh, and am using my VPS "ssh" console.

Tbh, I dont know how to re-enable root user
I ran this https://github.com/akcryptoguy/vps-harden and ever since I cant get ssh to work. So I am forced to do it all by hand

[robi]

@privsec you likely edit /etc/ssh/sshd_config

[privsec]

@robi Thank you.

I have access again for easier troubleshooting and I ended up reinstalling the OS and everything and once it all came back up I was able to add mounts.

Though its odd. I changed my data directory for nextcloud to /mnt/volumes/nextcloud and not all content is there.

Like if I click files manager it takes me to what Id assume is the cloud drive from wasabi, but there are files there that are not in wasabi

In addition, when I try to view the logs for any application OR for cloudron itself I am getting

[privsec]

@privsec As an example
That is on my server via CLI

And this
That is within the nextcloud bucket for my app.

[privsec]

I am uploading 7.23 gigs worth of files and will report back. On my VPS server the SSD had 131.59gb free out of 156gb

When the uploads finish, Ill report back.

[privsec]

So, I confirmed its saving data to the ssd of the VPS rather than sending it to the cloud

The uploads are not complete yet, but its evident that they are being stored locally rather then in the cloud.

Below is my Nexcloud app storage setting. Nexcloud is the actual rclone mounted folder.

Am I doing something wrong?

[girish]

@privsec Did I understand correctly that /mnt/volumes/nextcloud is an rclone wasabi mount and you have also moved the app data directory of nextcloud to this location ? If so, what you have done seems correct. I don't know about the correctness of rclone itself nor do I know about how rclone mounting really works. Does the mount show up in df -h output ?

You say there is a discrepancy between what's the in the filesystem and what's in wasabi, so this looks like some rclone issue?

[robi]

can you paste the output of:

df -h

mount

How did you set up rclone? (OS pkg, latest, beta)
Is rclone still running?

What version is it?

[privsec]

@girish It might be an rclone issue

@robi
I installed Rclone by following these steps https://rclone.org/install/

1. curl https://rclone.org/install.sh | sudo bash
2. rclone config
   3 rclone mount remote:path /path/to/mountpoint --vfs-cache-mode full --daemon

df -h

root@v2202012134940134654:~# df -h
Filesystem      Size  Used Avail Use% Mounted on
udev            3.9G     0  3.9G   0% /dev
tmpfs           798M   11M  788M   2% /run
/dev/sda3       157G   25G  126G  17% /
tmpfs           3.9G     0  3.9G   0% /dev/shm
tmpfs           5.0M     0  5.0M   0% /run/lock
tmpfs           3.9G     0  3.9G   0% /sys/fs/cgroup
/dev/sda2       976M  146M  764M  17% /boot
overlay         157G   25G  126G  17% /var/lib/docker/overlay2/5e80dc05d8a594a5a0c51aa5602ca124b428e0edba09181759e184497e45a875/merged
overlay         157G   25G  126G  17% /var/lib/docker/overlay2/903a9ff390459afb42b38eaa6b07c0f30f4f45fa413e154e35f766d3bcec7893/merged
overlay         157G   25G  126G  17% /var/lib/docker/overlay2/6af811d56e81cce0af9c14fcb1f0eadb6466a4a4eaa6bfd750eed95d5207c688/merged
overlay         157G   25G  126G  17% /var/lib/docker/overlay2/fbdaaedecbb9dbeeb0212e3dadb0cb32697ad523af7cbaf713a25bd567536edb/merged
overlay         157G   25G  126G  17% /var/lib/docker/overlay2/0c70992b7b8b2c704fc0a080263eb8eb09ae8518fc7054518ce58b75b4ad7e0d/merged
overlay         157G   25G  126G  17% /var/lib/docker/overlay2/f0d4d24114f30306a670e596a11d42b5fde57d30cee607746760dba613331055/merged
overlay         157G   25G  126G  17% /var/lib/docker/overlay2/ed4fd11e18c018a69bde9307d18a20f7380621126baf20e6de96949cb2a0cb19/merged
overlay         157G   25G  126G  17% /var/lib/docker/overlay2/c03dea8bf938e7044b8f9eb746dfbdcce955e69534c2c6a82b86c22c5aaaca5c/merged
overlay         157G   25G  126G  17% /var/lib/docker/overlay2/2eb8958e2598de5291a0895da411df947b97a6f873022b5eab415b6b2f8678b6/merged
overlay         157G   25G  126G  17% /var/lib/docker/overlay2/57f8ec7cc792bcc8e7f8c6a3a24c89cc2ef74bfcf794423a422d75aec0825144/merged
tmpfs           798M     0  798M   0% /run/user/0
overlay         157G   25G  126G  17% /var/lib/docker/overlay2/acd1b16c14ff94c587d697ff2a57c1c52df183d034ac7a7067f6a6b251a88977/merged
overlay         157G   25G  126G  17% /var/lib/docker/overlay2/c65f5aa0b3af3f75055a43b3a8d529b0a3fd51d23806538e4c5b8d2173ac4489/merged
overlay         157G   25G  126G  17% /var/lib/docker/overlay2/299711c86c910f26718ad9670963b511d86726d61cb67716d1f8566dbd83addd/merged
overlay         157G   25G  126G  17% /var/lib/docker/overlay2/043dea9ba03986e56e9fbd7f3760faf2dd4538db77839be209c049e74648a0be/merged
overlay         157G   25G  126G  17% /var/lib/docker/overlay2/0d3609e2d1f83f95df827fce2598eb713edf161e1a8bf0a01045621e1061ad95/merged

[girish]

@privsec From a casual reading of rclone, it seems that it's a FUSE mount. Isn't the mount point supposed to appear in df -h output ? Also, see https://linoxide.com/linux-command/list-mounted-drives-on-linux/ . I think it's not mounted properly (I also don't know if this mount persists reboots, maybe you rebooted in the middle).

[privsec]

@girish

My mount output was too large. So I have it in this .txt file

Mount.txt

In addition, it is still running and the version is here

root@v2202012134940134654:~# rclone --version
rclone v1.53.3

• os/arch: linux/amd64
• go version: go1.15.5