How to install Docassemble on Cloudron as a custom application

[LoudLemur]

@timconsidine Yes, I hope it becomes a community application, but I need to turn my attention elsewhere at the moment. Could you put it on your app, tim?

[LoudLemur]

@timconsidine No, we did not use the Cloudron base image. We built directly FROM jhpyle/docassemble:latest. The reason is pragmatic: docassemble's upstream image contains hundreds of carefully configured components (texlive, pandoc, imagemagick, LibreOffice, a full Python environment with ~200 packages, supervisord configs, nginx templates, dozens of shell scripts). Rebuilding all of that on top of cloudron/base would have been a multi-week project and a permanent maintenance burden, because every upstream docassemble release could change dependencies, scripts, or paths.
By building on top of the upstream image, we inherit all of that and only add our adaptation layer (LavinMQ swap, symlinks, start.sh, supervisor overrides). When docassemble releases a new version, updating is just a rebuild that pulls the new upstream image.

The tradeoff is that we lose some Cloudron-native tooling that the base image provides (like gosu and some helper scripts), and our image is larger than it would be with a clean build. For an official Cloudron package, rebuilding on cloudron/base would be the right approach, but for a community custom app, tracking upstream is far more sustainable.

(ATTENTION DOCASSEMBLE DEVELOPERS)

The strongest path would be a hybrid approach, similar to how the Baserow Cloudron package evolved. There are two realistic strategies, and they have different tradeoffs.
Strategy 1: Upstream-first (recommended)
Work with Jonathan Pyle (docassemble maintainer) to improve the upstream Docker image's support for constrained environments. The specific changes that would make official Cloudron packaging dramatically easier:
First, extend DAREADONLYFILESYSTEM to cover all write paths, not just the 25 it currently gates. If the upstream image could run cleanly with that flag set to true and all state under a single configurable data directory, the Cloudron package would be straightforward.
Second, make initialize.sh respect CONTAINERROLE fully. If sql is not in the role, the script should never touch PostgreSQL, not even to check if it is running. Same for Redis and RabbitMQ.
Third, support a DA_DATA_DIR environment variable that relocates all writable state to a single directory. Docassemble already partially supports this with DA_ROOT, but many paths are hardcoded outside of it (/var/www/.certs, /etc/ssl/docassemble, /var/lib/nginx, etc).
If those three changes landed upstream, an official Cloudron package could be built on cloudron/base:5.0 with a clean Dockerfile that installs docassemble from pip into a venv, uses Cloudron addons for PostgreSQL and Redis, and needs very few symlink hacks.
Strategy 2: Clean-room rebuild on cloudron/base (harder, more maintainable long-term)
Build from cloudron/base:5.0 and install docassemble's Python packages directly, bypassing the upstream Docker image entirely. This is how most official Cloudron packages work. The Dockerfile would install the system dependencies (texlive, pandoc, imagemagick, poppler, LibreOffice), create a Python venv, pip install the three docassemble packages (docassemble.base, docassemble.webapp, docassemble.demo), and configure nginx, supervisord, and LavinMQ from scratch.
The advantage is a smaller, cleaner image that follows Cloudron conventions properly. The disadvantage is substantial: docassemble has over 100 system dependencies and the upstream initialize.sh contains years of accumulated logic for database migrations, package management, certificate handling, and configuration templating. Replicating all of that correctly would take weeks, and every upstream release could break it.
What I would actually recommend to someone volunteering for this:
Start from our working v0.1 package and incrementally replace the upstream image. The sequence would be:

Fork our repo and get it running on your own Cloudron. Confirm everything works.
Open a conversation with the docassemble maintainer (the GitHub issue we just filed is a good starting point). Propose the DA_DATA_DIR and DAREADONLYFILESYSTEM improvements. Jonathan Pyle has been maintaining this project for years and is responsive.
While waiting for upstream changes, extract the initialize.sh logic you actually need. Most of it (S3 support, Azure blob storage, multi-server clustering, Let's Encrypt, internal PostgreSQL/Redis management) is irrelevant on Cloudron. A stripped-down init script that only handles database migration, package table population, nginx config generation, and service startup would be perhaps 200 lines instead of 1800.
Once you have a minimal init script, rebuild on cloudron/base:5.0. Install system dependencies from a known-good list (extractable from the upstream Dockerfile), pip install the docassemble packages, and use your minimal init script instead of the upstream one.
Add LDAP or OIDC integration for Cloudron single sign-on. Docassemble supports LDAP. This is expected for official Cloudron apps.
Submit to the Cloudron app store via cloudron versions init and the publication workflow.

[LoudLemur]

Great news! Jonathan Pyle likes this effort and he is going to take a look. He suggested this:

"If your platform supports Docker Compose, you might want to look at https://github.com/jhpyle/docassemble-compose, which shows how you can cut out the jhpyle/docassemble image, supervisord, and any service you are hosting externally."

[timconsidine]

@LoudLemur .... but Cloudron does NOT support Docker Compose, so ...

[timconsidine]

@loudlemur

for a community custom app ...

You raise an interesting point. Just because it is a community app does not mean it can be any base image. Community apps should be compliant to Cloudron standards. IMHO. If not, you might as well set up a separate VPS and deploy via docker compose, why have the hassle of cloudron compliance.
I do see the other view point, I just don't agree with it.

Rebuilding all of that on top of cloudron/base would have been a multi-week project

I started from scratch using a cloudron base image, none of your code, different direction, at 17:16, took 2 hours out for supper & TV, then returned to the app. 1st working version at 21:08. So roughly 2 hours.

I'm not saying that the app is fully built. But to get a Home Screen loaded is significant. I don't know the app, so not sure what to do next. That might take another couple hours.

Not seeking an argument, I just don't agree that your approach to build from upstream image is correct.

[LoudLemur]

@timconsidine That is fantastic, Tim!
I was just trying a version 2 using the Docker Compose approach, but if you have managed to do it on the Cloudron base, that would be much better.

[timconsidine]

See https://forum.cloudron.io/post/121990

[LoudLemur]

Follow-up: one more config.yml directive needed to avoid Cloudron healthcheck failures

A week or so after getting our production instance working, it silently went unhealthy on us. Worth documenting for anyone else who follows this guide, because the symptom is confusing and the fix is trivial.

Symptom

The Cloudron dashboard shows the app as "not responding", or the browser shows a Cloudron error page instead of docassemble. Inside the container, everything looks healthy:

# supervisorctl status
celery           RUNNING
celerysingle     RUNNING
cron             RUNNING
main:initialize  RUNNING
nginx            RUNNING
uwsgi            RUNNING
websockets       RUNNING

Meanwhile, the Cloudron app log fills up with this, every ten seconds, indefinitely:

=> Healthcheck error got response status 501
=> Healthcheck error got response status 501
=> Healthcheck error got response status 501

And docassemble.log shows repeated entries like:

docassemble: ip=172.18.0.1 i=docassemble.base:data/questions/default-interview.yml uid=None user=anonymous 2026-04-16 20:47:50 Not authorized

What is actually happening

Docassemble is fine. uWSGI is answering requests. The problem is that it is answering Cloudron's healthcheck probe of / with HTTP 501 NOT IMPLEMENTED.

Testing from inside the container confirms this:

# curl -sI http://localhost:8080/
HTTP/1.1 501 NOT IMPLEMENTED
Server: nginx
Content-Type: text/html; charset=utf-8

This is docassemble's deliberate behaviour when an anonymous user hits the root URL and there is no default interview set and no root redirect configured. It falls through to the factory default interview (docassemble.base:data/questions/default-interview.yml), which refuses anonymous access and returns 501 with a "Not authorized" body. There is even a dedicated /static/app/501.min.js in the response HTML, so this is a well-worn code path upstream.

Cloudron's healthcheck expects a 2xx or 3xx at the probe path. 501 trips the unhealthy marker, and after a few failed probes Cloudron stops proxying user traffic to the app. The app is then effectively offline to users even though it is running normally internally.

The fix

Add a single directive to /app/data/config/config.yml:

root redirect url: /user/sign-in

Then restart uWSGI from inside the container (via the Cloudron terminal):

supervisorctl restart uwsgi

After this, / returns a 302 redirect to /user/sign-in, which returns 200, and Cloudron's healthcheck is satisfied. The sign-in page is a sensible default landing for a private docassemble instance anyway.

Verification from inside the container:

# curl -sI http://localhost:8080/
HTTP/1.1 302 FOUND
Location: /user/sign-in

Give Cloudron 30-60 seconds to pick up the healthy state. The app will come back online in the dashboard.

Why this probably didn't bite us during the initial packaging

Best guess is an upstream behaviour change in docassemble itself. Earlier versions may have redirected anonymous root requests to the sign-in page automatically; current versions return 501 unless root redirect url or default interview (with anonymous access enabled) is explicitly set. It works on first install because the default interview loads once and caches, then fails later when cache conditions change or the app is redeployed.

Suggested addition to the packaging guide

Two options for handling this in the package itself, either of which would remove the manual step:

1. Have start.sh ensure root redirect url: /user/sign-in is present in the generated config.yml if neither root redirect url nor default interview is set by the user.
2. Add it as a default to the config template, so any new install gets it on first boot.

Option 1 is safer because it will not override a user who has deliberately set one of those directives.

Happy to PR this into the repo if there is interest.

[timconsidine]

@LoudLemur well done, sounds like you have had fun (!).

I'm not clear. You mentioned your production system - is that your own build or using my ALPHA community app ? Or you already cloned/fixed mine ?

If the latter, I can try to make changes as you describe. But I am in the middle of a couple of big projects, so it won't be immediate.

If timing is an issue, you might want to clone/fix and publish your own repo/community app.

[LoudLemur]

@timconsidine thanks. This was on my own version. I haven't got round to trying yours yet Tim, but yours is the one people should try.