Home Assistant

[A Former User]

Also I allowed signup for my personal gitea so if you want to report issues you can also do it via issues there. Also if you want to just contribute on there let me know once you make an account and I will change your repo limit from 0.

[A Former User]

Followup: Home Assistant is an incredible piece of software and I 100% recommend it.

Disclaimer: If you use Nanoleaf Essentials (lightstrips or bulbs) products it wont work with the Homekit or Nanoleaf integrations. Use Lifex or Hue lights instead. Make sure your Nanoleaf products use wifi like the Shapes series light panels before getting them to use with Home Assistant.

[SirFiChi]

FYI:
After all, I build my new system on a Raspi 4B 8GB and modified two Din-Housings so it fits to the fusebox. (In the first, I want the two components in a row, but the wires are to short ther's not enough space for the cases...)

I used https://sensorsiot.github.io/IOTstack/ | https://github.com/SensorsIot/IOTstack as a basis for the docker containers and I had to install homeassistant with the help of the script manually to figure out some issues...
(https://github.com/SensorsIot/IOTstack/blob/master/.native/hassio_supervisor.sh)

To control the raspi without keyboard/monitor I added parts of the RackPi --> https://www.thingiverse.com/thing:3022136
(My girlfriend modified the front sheet, so I had the chance to place the Raspi to the bottom of the case with the cooling fan on the top...)

(The Switch changes the voltage of the fan between 3.3V and 5V. 3.3V works fine and the Raspi actually has about 36°C...)
(The lower case os the housing for an original Raspi power supply. I opened it and fixed it on a circuit board. With a little switch I can turn on a LED to check if there is power on the device. The power supply is on fuse 24.)

(I also added an adapter from 3,5mm Jack to RJ45, so I can use the audio output in another room. (Our flat has network sockets in any room. They end up under the fusebox...))

[marcusquinn]

for this, adding some images from the links to bring more visual info here for interest...

[privsec]

@marcusquinn Wow, this is way cool. I like the location tracking.

[A Former User]

@privsec Yeah it can trigger events off of stuff like location + time of day which I use for turning off lights.

[privsec]

@atridad said in Home Assistant:

@privsec Yeah it can trigger events off of stuff like location + time of day which I use for turning off lights.

I am guessing this is bluetooth? Or do you have it based off of Access point connections?

[A Former User]

@privsec Naw GPS. It updates the app with GPS location. You need to have the app on your phone for this to work afaik.

[marcusquinn]

Handy for tracking what bluetooth IDs have passed within range or a connected bluetooth chip:

• https://www.home-assistant.io/integrations/bluetooth_tracker/
• https://www.instructables.com/Raspberry-Pi-Bluetooth-InOut-Board-or-Whos-Hom/
• https://github.com/robmarkoski/bt-mqtt-tracker
• https://www.balena.io/blog/tracking-bluetooth-beacons-with-a-raspberry-pi/
• https://github.com/phil-d-wilson/balena-locating

[random_eric]

Here's an initial attempt modeled on the LSIO image:
https://git.eyen.ca/cloudron/homeassistant

I haven't really tested it much.
I needed the docker wyze bridge but I did not want to expose it to the web so I included it in the docker file for home assistant.

I know at the very least, that either home assistant and the wyze bridge work independently, but I haven't tested supervisor yet.

My nas is currently having issues so I don't know when I will be able to work on it again, but if someone wants to pick up the torch, here you go