Could pull, but now cannot (private reg)

[jadudm]

@robi I do.

I think the error is somewhere in Cloudron.

Feb 06 10:21:35 box:docker downloadImage: pulling image. attempt 10
Feb 06 10:21:35 box:docker pullImage: will pull docker.host.us/jadudm/grocy:1.0.0. auth: yes

I'll claim that the better behavior would be for Cloudron to fail when it cannot pull an image. Instead, it is trying to set up the extensions and run the container when the container doesn't exist.

Given that it loops through 10 (failed) attempts to pull the image, there's something going wrong with the image pull. There's nothing in the existing logs that gives me enough information to figure out why I'm getting a 404 on the image. (I can pull the image from another machine, and both the dev machine and the Cloudron host are effectively on the same network.)

I'll see if there's a way I can... I don't know. I feel like I'm missing something obvious, but I'd like a bit more info from the Cloudron logs in order to debug this.

EDIT: It looks like

https://git.cloudron.io/cloudron/box/-/blob/master/src/apptask.js#L354

is where downloadImage is called, but I'm unclear where errors that are generated from that process are handled. It looks like a failed image download does just fall through to a continued attempt to run the container.

[jadudm]

When I attempt to update my Docker registry credentials in the Settings, I get the following error:

(HTTP code 500) server error - Get https://docker.host.us/v2/: net/http: request canceled while waiting for connection (Client.Timeout exceeded while awaiting headers) 

From the command line on my dev machine, I can

curl -X GET -u jadudm:ASDFASDF https://docker.host.us/v2/_catalog

and get a list of the images on the host. Hence why I am confused as to what may have changed under the hood that my private registry no longer works from Cloudron as an image installation source (when it did not that long ago).

EDIT: In docker.js,

https://git.cloudron.io/cloudron/box/-/blob/master/src/docker.js#L60

The comment says what it says:

    const [error] = await safe(gConnection.checkAuth(config)); // this returns a 500 even for auth errors

I have the correct username/password in my Registry conf. It never changed... but it stopped working at some point in Cloudron. It works just fine elsewhere. So, I don't know if this is a network issue, or an auth issue, or what... because it looks like checkAuth doesn't give me a lot of info to debug with?

[girish]

@jadudm Missed this one somehow, did you get this sorted out?

[jadudm]

@girish I started using the DockerHub repo, and will circle back around to try and re-install the local Docker Registry. So, the answer is "sorta no." But I found a path to keep moving.

I'm not sure why, given no changes on my part, that the local registry decided to stop working for app install by Cloudron. (All of these services are on the same host...) There were not disk/RAM issues that I could see, so something was going on, but I couldn't get enough info to debug beyond the fact that things retried-and-failed.

[jadudm]

@girish, Even with a clean re-install of the docker registry, I can't convince my Cloudron instance to authenticate against it. I get 500 errors from it consistently (but can hit the v2 URL from a browser just fine?).

I'm happy to do whatever I can to help with debugging. Perhaps this is one of those "it works everywhere else, but not on my machine" kind of things.

[jadudm]

@jadudm Looking at the timeline on this thread, I'm wondering if I have the same problem.

Updating to 7.1.something and reinstalling the image registry to see if that fixes things. Will update this thread when I discover the outcome...

[jadudm]

@jadudm This might be an aggressive firewall issue.

I'll update when I know for sure. However, I suspect I'm not letting :5000 through, which would allow web clients to browse the registry, but not allow me to autheticate/push from the command line.

[jadudm]

@jadudm Sorry, @girish . This was "user error." I do not know how this local registry ever worked, because I would swear the ports were not open to allow it to work.

However, this is a case where 5000 was not open to me. So, I could hit the /v2/ endpoint via HTTPS, and could locally store my login credentials via docker login, and I could browse the registry... but push and pull would fail.

Sill... I don't know how this worked in the first place, given that I don't think I had firewall rules open for it to succeed.

If this was a ticket, I'd mark it closed.

[jadudm]

@jadudm Nope.

If the machine I'm working on is dev, and the registry is hosted on my cloudron as registry.cloudron.example

I can now:

1. Browse to my private registry.
2. Authenticate and push to it from the command line from dev.
3. I cannot, via the Cloudron admin panel, set up registry.cloudron.example as my private registry.

I consistently get 500 errors for the registry.cloudron.example/v2/ endpoint. However, if I visit it in a browser on dev, it is easily reachable.

I am up to date on updates, I have restarted my cloudron recently, I have restarted the registry... I've even torn down and rebuilt the registry. I'm unclear why I can't set up my private registry.

Is there an invisible config file somewhere deep in the heart of Cloudron that I could go inspect the old fashioned way, and make sure some old data isn't being held on to that's... bad?

[jadudm]

@jadudm

And, for myself, for future reference:

Invalid serverAddress: (HTTP code 500) server error - Get "https://reg.cloudron.example/v2/": net/http: request canceled while waiting for connection (Client.Timeout exceeded while awaiting headers)

I tried manually changing the auth backend to "htpasswd" per documentation on the Docker site, and created a valid htpass file... but that doesn't change anything.

I have no idea why I cannot configure my cloudron instance to use a private registry.

[robi]

@jadudm The issue seems to be from your cloudron to the private registry.

So where is each? DNS? ping test? etc

[jadudm]

@robi Many thanks. I see where you're coming from. What confuses me... is that everything is on the same machine.

Which is why I'm (O_o), and think something really simple is going on.

1. I can hit the registry from the web (meaning port 443 gets through the firewall from the outside world), and authenticate as a Cloudron-based user.
2. I can hit the registry from the command line, and am authenticated as the same Cloudron user. This means port 5000 is getting through.
3. I cannot convince the Cloudron admin interface to let me authenticate as that user. The Cloudron admin interface (which is on the same machine as the registry) will not authenticate; it gets the 500 error.

I'm thoroughly confused, and am uncertain where to find the debug information that I need to solve this particular problem. Hence why I'm wondering if there's some kind of config that might have... "hung around" from previous attempts?

[jadudm]

A new not-what-I-was-looking-for-but-it-works-solution:

1. I'm mirroring the Dockerfile/project from my local Gitea to Gitlab.
2. I've set up Gitlab as my registry for the project.

(The project in this case is a Grocy package for Cloudron.)

This arguably gives me a private-enough repo for what I'm exploring, but I was hoping to be able to entirely leverage my Cloudron for this.

I'm just plain confused why, at some point in the past, my locally-hosted registry worked, and now, it does not. This is why I believe there is "crufty" config laying around, somewhere, and things therefore don't work.

(But... this makes almost no sense, because I have uninstalled and reinstalled the registry, so it is not clear how any state could persist.)

Anyway. This remains a mystery, and I would need some explicit guidance as to where I should dig around in the backend of Cloudron to figure out why things are not behaving. (It could also be that there's still some port that I don't have open, or... )