Help please failing setup of cloudron
-
@girish
systemctl status unbound● unbound.service - Unbound DNS server Loaded: loaded (/lib/systemd/system/unbound.service; enabled; vendor preset: enabled) Active: active (running) since Mon 2022-03-21 19:17:06 UTC; 4min 15s ago Docs: man:unbound(8) Main PID: 4609 (unbound) Tasks: 1 (limit: 9436) Memory: 8.5M CGroup: /system.slice/unbound.service └─4609 /usr/sbin/unbound -d Mar 21 19:16:15 ubuntu systemd[1]: Starting Unbound DNS server... Mar 21 19:16:15 ubuntu package-helper[4595]: /var/lib/unbound/root.key does not exist, copying from /usr/share/> Mar 21 19:17:05 ubuntu package-helper[4599]: /var/lib/unbound/root.key has content Mar 21 19:17:05 ubuntu package-helper[4599]: fail: the anchor is NOT ok and could not be fixed Mar 21 19:17:05 ubuntu unbound[4609]: [4609:0] notice: init module 0: subnet Mar 21 19:17:05 ubuntu unbound[4609]: [4609:0] notice: init module 1: validator Mar 21 19:17:05 ubuntu unbound[4609]: [4609:0] notice: init module 2: iterator Mar 21 19:17:06 ubuntu unbound[4609]: [4609:0] info: start of service (unbound 1.9.4). Mar 21 19:17:06 ubuntu systemd[1]: Started Unbound DNS server.journalctl -u unbound -a
-- Logs begin at Mon 2022-03-21 19:13:02 UTC, end at Mon 2022-03-21 19:20:58 UTC. -- Mar 21 19:16:15 ubuntu systemd[1]: Starting Unbound DNS server... Mar 21 19:16:15 ubuntu package-helper[4595]: /var/lib/unbound/root.key does not exist, copying from /usr/share/> Mar 21 19:17:05 ubuntu package-helper[4599]: /var/lib/unbound/root.key has content Mar 21 19:17:05 ubuntu package-helper[4599]: fail: the anchor is NOT ok and could not be fixed Mar 21 19:17:05 ubuntu unbound[4609]: [4609:0] notice: init module 0: subnet Mar 21 19:17:05 ubuntu unbound[4609]: [4609:0] notice: init module 1: validator Mar 21 19:17:05 ubuntu unbound[4609]: [4609:0] notice: init module 2: iterator Mar 21 19:17:06 ubuntu unbound[4609]: [4609:0] info: start of service (unbound 1.9.4). Mar 21 19:17:06 ubuntu systemd[1]: Started Unbound DNS server.@Spojler said in Help please failing setup of cloudron:
fail: the anchor is NOT ok and could not be fixed
I wonder why that is. Can you please try:
unbound-anchor -a /var/lib/unbound/root.key systemctl restart unbound host www.cloudron.io 127.0.0.1Just search for that error led me to https://github.com/MichaIng/DietPi/issues/4218 and https://old.reddit.com/r/pihole/comments/m6st3w/unbound_the_anchor_is_not_ok_and_could_not_be/ . Do you happen to be having a router that blocks DNS queries or have some PI hole or equivalent as your outbound DNS ?
-
@Spojler said in Help please failing setup of cloudron:
fail: the anchor is NOT ok and could not be fixed
I wonder why that is. Can you please try:
unbound-anchor -a /var/lib/unbound/root.key systemctl restart unbound host www.cloudron.io 127.0.0.1Just search for that error led me to https://github.com/MichaIng/DietPi/issues/4218 and https://old.reddit.com/r/pihole/comments/m6st3w/unbound_the_anchor_is_not_ok_and_could_not_be/ . Do you happen to be having a router that blocks DNS queries or have some PI hole or equivalent as your outbound DNS ?
-
@Spojler said in Help please failing setup of cloudron:
fail: the anchor is NOT ok and could not be fixed
I wonder why that is. Can you please try:
unbound-anchor -a /var/lib/unbound/root.key systemctl restart unbound host www.cloudron.io 127.0.0.1Just search for that error led me to https://github.com/MichaIng/DietPi/issues/4218 and https://old.reddit.com/r/pihole/comments/m6st3w/unbound_the_anchor_is_not_ok_and_could_not_be/ . Do you happen to be having a router that blocks DNS queries or have some PI hole or equivalent as your outbound DNS ?
-
@girish
I don't have static public IP address, I workaround that with DDNS and Cloudflare.
I have NAS with homecloud funcionality and that work fine when I connecting remotly.@Spojler you don't need a static IP to use Cloudron. It's not clear to me what's happening. For some reason the DNS queries are not working in the VM.
I think what you can do is to maybe check if this is some network issue or ubuntu/unbound or cloudron issue. I would then try something like this:
systemd stop unbound- disables unbound serversystemctl enable systemd-resolved- this is the default DNS server of ubuntu.
Do DNS queries work after this?
host www.cloudron.ioessentially should work now. You might also want to check if/etc/resolve.confgot patched up to127.0.0.53(from what I recall from memory). -
@Rawlin what happens if you try to manually run the following on this server now?
curl -sL http://nginx.org/packages/ubuntu/pool/nginx/n/nginx/nginx_1.18.0-2~bionic_amd64.deb -o /tmp/nginx.deb@nebulon I ran following on the server and it seemed to have worked as it didn't error out, it returned a clean prompt.
curl -sL http://nginx.org/packages/ubuntu/pool/nginx/n/nginx/nginx_1.18.0-2~bionic_amd64.deb -o /tmp/nginx.debI believe I'm not seeing DNS issues outside this if it is one. I can browse the web or resolve other computers or sites on the VM.
I ran the following to confirm DNS look up to cloudron.
rawlin@ubuntu:~$ host www.cloudron.io 127.0.0.1 Using domain server: Name: 127.0.0.1 Address: 127.0.0.1#53 Aliases: www.cloudron.io has address 3.209.21.239 www.cloudron.io has IPv6 address 2600:1f18:80f:e00:fa5d:db49:3bf:3f22 rawlin@ubuntu:~$I'm connected behind a single Netgear router using a wired connection.
Thanks
-
@nebulon I ran following on the server and it seemed to have worked as it didn't error out, it returned a clean prompt.
curl -sL http://nginx.org/packages/ubuntu/pool/nginx/n/nginx/nginx_1.18.0-2~bionic_amd64.deb -o /tmp/nginx.debI believe I'm not seeing DNS issues outside this if it is one. I can browse the web or resolve other computers or sites on the VM.
I ran the following to confirm DNS look up to cloudron.
rawlin@ubuntu:~$ host www.cloudron.io 127.0.0.1 Using domain server: Name: 127.0.0.1 Address: 127.0.0.1#53 Aliases: www.cloudron.io has address 3.209.21.239 www.cloudron.io has IPv6 address 2600:1f18:80f:e00:fa5d:db49:3bf:3f22 rawlin@ubuntu:~$I'm connected behind a single Netgear router using a wired connection.
Thanks
-
@Rawlin I pushed a workaround for this. Can you please get the latest setup file and try?
Like:
rm -f cloudron-setup # remove the existing setup file wget https://cloudron.io/cloudron-setup ./cloudron-setup --redoLet me know if that helps
@girish I just tried the updated script and got a different error. Here's the log after running it.
Running cloudron-setup with args : -- Hit:1 http://us.archive.ubuntu.com/ubuntu focal InRelease Get:2 http://us.archive.ubuntu.com/ubuntu focal-updates InRelease [114 kB] Get:3 http://security.ubuntu.com/ubuntu focal-security InRelease [114 kB] Get:4 http://us.archive.ubuntu.com/ubuntu focal-backports InRelease [108 kB] Fetched 336 kB in 1s (665 kB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... python3 is already the newest version (3.8.2-0ubuntu2). curl is already the newest version (7.68.0-1ubuntu2.7). software-properties-common is already the newest version (0.99.9.8). ubuntu-standard is already the newest version (1.450.2). The following packages were automatically installed and are no longer required: chromium-codecs-ffmpeg-extra gstreamer1.0-vaapi libgstreamer-plugins-bad1.0-0 libva-wayland2 Use 'sudo apt autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 3 not upgraded. readonly SOURCE_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)" readonly arg_infraversionpath="${SOURCE_DIR}/../src" function die { echo $1 exit 1 } export DEBIAN_FRONTEND=noninteractive readonly ubuntu_codename=$(lsb_release -cs) readonly ubuntu_version=$(lsb_release -rs) # hold grub since updating it breaks on some VPS providers. also, dist-upgrade will trigger it apt-mark hold grub* >/dev/null apt-get -o Dpkg::Options::="--force-confdef" update -y Hit:1 http://us.archive.ubuntu.com/ubuntu focal InRelease Get:2 http://security.ubuntu.com/ubuntu focal-security InRelease [114 kB] Get:3 http://us.archive.ubuntu.com/ubuntu focal-updates InRelease [114 kB] Get:4 http://us.archive.ubuntu.com/ubuntu focal-backports InRelease [108 kB] Fetched 336 kB in 0s (739 kB/s) Reading package lists... apt-get -o Dpkg::Options::="--force-confdef" upgrade -y Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... The following packages were automatically installed and are no longer required: chromium-codecs-ffmpeg-extra gstreamer1.0-vaapi libgstreamer-plugins-bad1.0-0 libva-wayland2 Use 'sudo apt autoremove' to remove them. The following packages have been kept back: fwupd libjavascriptcoregtk-4.0-18 libwebkit2gtk-4.0-37 0 upgraded, 0 newly installed, 0 to remove and 3 not upgraded. apt-mark unhold grub* >/dev/null echo "==> Installing required packages" ==> Installing required packages debconf-set-selections <<< 'mysql-server mysql-server/root_password password password' debconf-set-selections <<< 'mysql-server mysql-server/root_password_again password password' # this enables automatic security upgrades (https://help.ubuntu.com/community/AutomaticSecurityUpdates) # resolvconf is needed for unbound to work property after disabling systemd-resolved in 18.04 gpg_package=$([[ "${ubuntu_version}" == "16.04" ]] && echo "gnupg" || echo "gpg") mysql_package=$([[ "${ubuntu_version}" == "20.04" ]] && echo "mysql-server-8.0" || echo "mysql-server-5.7") ntpd_package=$([[ "${ubuntu_version}" == "20.04" ]] && echo "systemd-timesyncd" || echo "") apt-get -y install --no-install-recommends \ acl \ apparmor \ build-essential \ cifs-utils \ cron \ curl \ debconf-utils \ dmsetup \ $gpg_package \ ipset \ iptables \ libpython2.7 \ linux-generic \ logrotate \ $mysql_package \ nfs-common \ $ntpd_package \ openssh-server \ pwgen \ resolvconf \ sshfs \ swaks \ tzdata \ unattended-upgrades \ unbound \ unzip \ xfsprogs Reading package lists... Building dependency tree... Reading state information... acl is already the newest version (2.2.53-6). cron is already the newest version (3.0pl1-136ubuntu1). dmsetup is already the newest version (2:1.02.167-1ubuntu1). iptables is already the newest version (1.8.4-3ubuntu2). logrotate is already the newest version (3.14.0-4ubuntu3). unzip is already the newest version (6.0-25ubuntu1). xfsprogs is already the newest version (5.3.0-1ubuntu2). debconf-utils is already the newest version (1.5.73). pwgen is already the newest version (2.08-2). resolvconf is already the newest version (1.82). sshfs is already the newest version (3.6.0+repack+really2.10-0ubuntu1). swaks is already the newest version (20190914.0-1). apparmor is already the newest version (2.13.3-7ubuntu5.1). build-essential is already the newest version (12.8ubuntu1.1). cifs-utils is already the newest version (2:6.9-1ubuntu0.1). curl is already the newest version (7.68.0-1ubuntu2.7). gpg is already the newest version (2.2.19-3ubuntu2.1). ipset is already the newest version (7.5-1ubuntu0.20.04.1). linux-generic is already the newest version (5.4.0.105.109). mysql-server-8.0 is already the newest version (8.0.28-0ubuntu0.20.04.3). nfs-common is already the newest version (1:1.3.4-2.5ubuntu3.4). openssh-server is already the newest version (1:8.2p1-4ubuntu0.4). systemd-timesyncd is already the newest version (245.4-4ubuntu3.15). tzdata is already the newest version (2022a-0ubuntu0.20.04). unattended-upgrades is already the newest version (2.3ubuntu0.1). libpython2.7 is already the newest version (2.7.18-1~20.04.1). unbound is already the newest version (1.9.4-2ubuntu1.2). The following packages were automatically installed and are no longer required: chromium-codecs-ffmpeg-extra gstreamer1.0-vaapi libgstreamer-plugins-bad1.0-0 libva-wayland2 Use 'sudo apt autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 3 not upgraded. echo "==> installing nginx for xenial for TLSv3 support" ==> installing nginx for xenial for TLSv3 support curl -sL http://nginx.org/packages/ubuntu/pool/nginx/n/nginx/nginx_1.18.0-2~${ubuntu_codename}_amd64.deb -o /tmp/nginx.deb # apt install with install deps (as opposed to dpkg -i) apt install -y /tmp/nginx.deb WARNING: apt does not have a stable CLI interface. Use with caution in scripts. Reading package lists... Building dependency tree... Reading state information... The following packages were automatically installed and are no longer required: chromium-codecs-ffmpeg-extra gstreamer1.0-vaapi libgstreamer-plugins-bad1.0-0 libva-wayland2 Use 'sudo apt autoremove' to remove them. The following NEW packages will be installed: nginx 0 upgraded, 1 newly installed, 0 to remove and 3 not upgraded. Need to get 0 B/853 kB of archives. After this operation, 3,056 kB of additional disk space will be used. Get:1 /tmp/nginx.deb nginx amd64 1.18.0-2~focal [853 kB] Selecting previously unselected package nginx. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 219217 files and directories currently installed.) Preparing to unpack /tmp/nginx.deb ... ---------------------------------------------------------------------- Thanks for using nginx! Please find the official documentation for nginx here: * http://nginx.org/en/docs/ Please subscribe to nginx-announce mailing list to get the most important news about nginx: * http://nginx.org/en/support.html Commercial subscriptions for nginx are available on: * http://nginx.com/products/ ---------------------------------------------------------------------- Unpacking nginx (1.18.0-2~focal) ... Setting up nginx (1.18.0-2~focal) ... Created symlink /etc/systemd/system/multi-user.target.wants/nginx.service → /lib/systemd/system/nginx.service. Processing triggers for man-db (2.9.1-1) ... Processing triggers for systemd (245.4-4ubuntu3.15) ... rm /tmp/nginx.deb # on some providers like scaleway the sudo file is changed and we want to keep the old one apt-get -o Dpkg::Options::="--force-confold" install -y --no-install-recommends sudo Reading package lists... Building dependency tree... Reading state information... sudo is already the newest version (1.8.31-1ubuntu1.2). sudo set to manually installed. The following packages were automatically installed and are no longer required: chromium-codecs-ffmpeg-extra gstreamer1.0-vaapi libgstreamer-plugins-bad1.0-0 libva-wayland2 Use 'sudo apt autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 3 not upgraded. # this ensures that unattended upgades are enabled, if it was disabled during ubuntu install time (see #346) # debconf-set-selection of unattended-upgrades/enable_auto_updates + dpkg-reconfigure does not work cp /usr/share/unattended-upgrades/20auto-upgrades /etc/apt/apt.conf.d/20auto-upgrades echo "==> Installing node.js" ==> Installing node.js readonly node_version=16.13.1 mkdir -p /usr/local/node-${node_version} curl -sL https://nodejs.org/dist/v${node_version}/node-v${node_version}-linux-x64.tar.gz | tar zxf - --strip-components=1 -C /usr/local/node-${node_version} ln -sf /usr/local/node-${node_version}/bin/node /usr/bin/node ln -sf /usr/local/node-${node_version}/bin/npm /usr/bin/npm apt-get install -y --no-install-recommends python # Install python which is required for npm rebuild Reading package lists... Building dependency tree... Reading state information... The following packages were automatically installed and are no longer required: chromium-codecs-ffmpeg-extra gstreamer1.0-vaapi libgstreamer-plugins-bad1.0-0 libva-wayland2 Use 'sudo apt autoremove' to remove them. The following additional packages will be installed: libpython2-stdlib python2 python2-minimal python2.7 python2.7-minimal Suggested packages: python2-doc python-tk python2.7-doc binfmt-support The following NEW packages will be installed: libpython2-stdlib python-is-python2 python2 python2-minimal python2.7 python2.7-minimal 0 upgraded, 6 newly installed, 0 to remove and 3 not upgraded. Need to get 1,597 kB of archives. After this operation, 4,538 kB of additional disk space will be used. Get:1 http://us.archive.ubuntu.com/ubuntu focal-updates/universe amd64 python2.7-minimal amd64 2.7.18-1~20.04.1 [1,285 kB] Get:2 http://us.archive.ubuntu.com/ubuntu focal/universe amd64 python2-minimal amd64 2.7.17-2ubuntu4 [27.5 kB] Get:3 http://us.archive.ubuntu.com/ubuntu focal-updates/universe amd64 python2.7 amd64 2.7.18-1~20.04.1 [248 kB] Get:4 http://us.archive.ubuntu.com/ubuntu focal/universe amd64 libpython2-stdlib amd64 2.7.17-2ubuntu4 [7,072 B] Get:5 http://us.archive.ubuntu.com/ubuntu focal/universe amd64 python2 amd64 2.7.17-2ubuntu4 [26.5 kB] Get:6 http://us.archive.ubuntu.com/ubuntu focal/universe amd64 python-is-python2 all 2.7.17-4 [2,496 B] Fetched 1,597 kB in 0s (3,691 kB/s) Selecting previously unselected package python2.7-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 219254 files and directories currently installed.) Preparing to unpack .../python2.7-minimal_2.7.18-1~20.04.1_amd64.deb ... Unpacking python2.7-minimal (2.7.18-1~20.04.1) ... Selecting previously unselected package python2-minimal. Preparing to unpack .../python2-minimal_2.7.17-2ubuntu4_amd64.deb ... Unpacking python2-minimal (2.7.17-2ubuntu4) ... Selecting previously unselected package python2.7. Preparing to unpack .../python2.7_2.7.18-1~20.04.1_amd64.deb ... Unpacking python2.7 (2.7.18-1~20.04.1) ... Selecting previously unselected package libpython2-stdlib:amd64. Preparing to unpack .../libpython2-stdlib_2.7.17-2ubuntu4_amd64.deb ... Unpacking libpython2-stdlib:amd64 (2.7.17-2ubuntu4) ... Setting up python2.7-minimal (2.7.18-1~20.04.1) ... Setting up python2-minimal (2.7.17-2ubuntu4) ... Selecting previously unselected package python2. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 219310 files and directories currently installed.) Preparing to unpack .../python2_2.7.17-2ubuntu4_amd64.deb ... Unpacking python2 (2.7.17-2ubuntu4) ... Selecting previously unselected package python-is-python2. Preparing to unpack .../python-is-python2_2.7.17-4_all.deb ... Unpacking python-is-python2 (2.7.17-4) ... Setting up python2.7 (2.7.18-1~20.04.1) ... Setting up libpython2-stdlib:amd64 (2.7.17-2ubuntu4) ... Setting up python2 (2.7.17-2ubuntu4) ... Setting up python-is-python2 (2.7.17-4) ... Processing triggers for mime-support (3.64ubuntu1) ... Processing triggers for gnome-menus (3.36.0-1ubuntu1) ... Processing triggers for man-db (2.9.1-1) ... Processing triggers for desktop-file-utils (0.24-1ubuntu3) ... [[ "$(python --version 2>&1)" == "Python 2.7."* ]] || die "Expecting python version to be 2.7.x" # https://docs.docker.com/engine/installation/linux/ubuntulinux/ echo "==> Installing Docker" ==> Installing Docker # create systemd drop-in file. if you channge options here, be sure to fixup installer.sh as well mkdir -p /etc/systemd/system/docker.service.d echo -e "[Service]\nExecStart=\nExecStart=/usr/bin/dockerd -H fd:// --log-driver=journald --exec-opt native.cgroupdriver=cgroupfs --storage-driver=overlay2 --experimental --ip6tables" > /etc/systemd/system/docker.service.d/cloudron.conf # there are 3 packages for docker - containerd, CLI and the daemon readonly docker_version=20.10.12 curl -sL "https://download.docker.com/linux/ubuntu/dists/${ubuntu_codename}/pool/stable/amd64/containerd.io_1.4.9-1_amd64.deb" -o /tmp/containerd.deb curl -sL "https://download.docker.com/linux/ubuntu/dists/${ubuntu_codename}/pool/stable/amd64/docker-ce-cli_${docker_version}~3-0~ubuntu-${ubuntu_codename}_amd64.deb" -o /tmp/docker-ce-cli.deb curl -sL "https://download.docker.com/linux/ubuntu/dists/${ubuntu_codename}/pool/stable/amd64/docker-ce_${docker_version}~3-0~ubuntu-${ubuntu_codename}_amd64.deb" -o /tmp/docker.deb # apt install with install deps (as opposed to dpkg -i) apt install -y /tmp/containerd.deb /tmp/docker-ce-cli.deb /tmp/docker.deb WARNING: apt does not have a stable CLI interface. Use with caution in scripts. Reading package lists... Building dependency tree... Reading state information... The following packages were automatically installed and are no longer required: chromium-codecs-ffmpeg-extra gstreamer1.0-vaapi libgstreamer-plugins-bad1.0-0 libva-wayland2 Use 'sudo apt autoremove' to remove them. The following additional packages will be installed: git git-man liberror-perl pigz Suggested packages: aufs-tools cgroupfs-mount | cgroup-lite git-daemon-run | git-daemon-sysvinit git-doc git-el git-email git-gui gitk gitweb git-cvs git-mediawiki git-svn Recommended packages: docker-ce-rootless-extras docker-scan-plugin The following NEW packages will be installed: containerd.io docker-ce docker-ce-cli git git-man liberror-perl pigz 0 upgraded, 7 newly installed, 0 to remove and 3 not upgraded. Need to get 5,523 kB/92.1 MB of archives. After this operation, 417 MB of additional disk space will be used. Get:1 http://us.archive.ubuntu.com/ubuntu focal/universe amd64 pigz amd64 2.4-1 [57.4 kB] Get:2 /tmp/containerd.deb containerd.io amd64 1.4.9-1 [24.7 MB] Get:3 http://us.archive.ubuntu.com/ubuntu focal/main amd64 liberror-perl all 0.17029-1 [26.5 kB] Get:4 http://us.archive.ubuntu.com/ubuntu focal-updates/main amd64 git-man all 1:2.25.1-1ubuntu3.2 [884 kB] Get:5 http://us.archive.ubuntu.com/ubuntu focal-updates/main amd64 git amd64 1:2.25.1-1ubuntu3.2 [4,554 kB] Get:6 /tmp/docker-ce-cli.deb docker-ce-cli amd64 5:20.10.12~3-0~ubuntu-focal [40.7 MB] Get:7 /tmp/docker.deb docker-ce amd64 5:20.10.12~3-0~ubuntu-focal [21.2 MB] Fetched 5,523 kB in 1s (8,325 kB/s) Selecting previously unselected package pigz. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 219342 files and directories currently installed.) Preparing to unpack .../0-pigz_2.4-1_amd64.deb ... Unpacking pigz (2.4-1) ... Selecting previously unselected package containerd.io. Preparing to unpack .../1-containerd.deb ... Unpacking containerd.io (1.4.9-1) ... Selecting previously unselected package docker-ce-cli. Preparing to unpack .../2-docker-ce-cli.deb ... Unpacking docker-ce-cli (5:20.10.12~3-0~ubuntu-focal) ... Selecting previously unselected package docker-ce. Preparing to unpack .../3-docker.deb ... Unpacking docker-ce (5:20.10.12~3-0~ubuntu-focal) ... Selecting previously unselected package liberror-perl. Preparing to unpack .../4-liberror-perl_0.17029-1_all.deb ... Unpacking liberror-perl (0.17029-1) ... Selecting previously unselected package git-man. Preparing to unpack .../5-git-man_1%3a2.25.1-1ubuntu3.2_all.deb ... Unpacking git-man (1:2.25.1-1ubuntu3.2) ... Selecting previously unselected package git. Preparing to unpack .../6-git_1%3a2.25.1-1ubuntu3.2_amd64.deb ... Unpacking git (1:2.25.1-1ubuntu3.2) ... Setting up liberror-perl (0.17029-1) ... Setting up containerd.io (1.4.9-1) ... Created symlink /etc/systemd/system/multi-user.target.wants/containerd.service → /lib/systemd/system/containerd.service. Setting up docker-ce-cli (5:20.10.12~3-0~ubuntu-focal) ... Setting up pigz (2.4-1) ... Setting up git-man (1:2.25.1-1ubuntu3.2) ... Setting up docker-ce (5:20.10.12~3-0~ubuntu-focal) ... Created symlink /etc/systemd/system/multi-user.target.wants/docker.service → /lib/systemd/system/docker.service. Created symlink /etc/systemd/system/sockets.target.wants/docker.socket → /lib/systemd/system/docker.socket. Job for docker.service failed because the control process exited with error code. See "systemctl status docker.service" and "journalctl -xe" for details. invoke-rc.d: initscript docker, action "start" failed. ● docker.service - Docker Application Container Engine Loaded: loaded (]8;;file://ubuntu/lib/systemd/system/docker.service/lib/systemd/system/docker.service]8;;; enabled; vendor preset: enabled) Drop-In: /etc/systemd/system/docker.service.d └─]8;;file://ubuntu/etc/systemd/system/docker.service.d/cloudron.confcloudron.conf]8;; Active: activating (auto-restart) (Result: exit-code) since Fri 2022-03-25 12:48:30 CDT; 6ms ago TriggeredBy: ● docker.socket Docs: ]8;;https://docs.docker.comhttps://docs.docker.com]8;; Process: 42189 ExecStart=/usr/bin/dockerd -H fd:// --log-driver=journald --exec-opt native.cgroupdriver=cgroupfs --storage-driver=overlay2 --experimental --ip6tables [0;1;31m(code=exited, status=1/FAILURE)[0m Main PID: 42189 (code=exited, status=1/FAILURE) dpkg: error processing package docker-ce (--configure): installed docker-ce package post-installation script subprocess returned error exit status 1 Setting up git (1:2.25.1-1ubuntu3.2) ... Processing triggers for man-db (2.9.1-1) ... Processing triggers for systemd (245.4-4ubuntu3.15) ... Errors were encountered while processing: docker-ce E: Sub-process /usr/bin/dpkg returned an error code (1) -
@girish I just tried the updated script and got a different error. Here's the log after running it.
Running cloudron-setup with args : -- Hit:1 http://us.archive.ubuntu.com/ubuntu focal InRelease Get:2 http://us.archive.ubuntu.com/ubuntu focal-updates InRelease [114 kB] Get:3 http://security.ubuntu.com/ubuntu focal-security InRelease [114 kB] Get:4 http://us.archive.ubuntu.com/ubuntu focal-backports InRelease [108 kB] Fetched 336 kB in 1s (665 kB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... python3 is already the newest version (3.8.2-0ubuntu2). curl is already the newest version (7.68.0-1ubuntu2.7). software-properties-common is already the newest version (0.99.9.8). ubuntu-standard is already the newest version (1.450.2). The following packages were automatically installed and are no longer required: chromium-codecs-ffmpeg-extra gstreamer1.0-vaapi libgstreamer-plugins-bad1.0-0 libva-wayland2 Use 'sudo apt autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 3 not upgraded. readonly SOURCE_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)" readonly arg_infraversionpath="${SOURCE_DIR}/../src" function die { echo $1 exit 1 } export DEBIAN_FRONTEND=noninteractive readonly ubuntu_codename=$(lsb_release -cs) readonly ubuntu_version=$(lsb_release -rs) # hold grub since updating it breaks on some VPS providers. also, dist-upgrade will trigger it apt-mark hold grub* >/dev/null apt-get -o Dpkg::Options::="--force-confdef" update -y Hit:1 http://us.archive.ubuntu.com/ubuntu focal InRelease Get:2 http://security.ubuntu.com/ubuntu focal-security InRelease [114 kB] Get:3 http://us.archive.ubuntu.com/ubuntu focal-updates InRelease [114 kB] Get:4 http://us.archive.ubuntu.com/ubuntu focal-backports InRelease [108 kB] Fetched 336 kB in 0s (739 kB/s) Reading package lists... apt-get -o Dpkg::Options::="--force-confdef" upgrade -y Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... The following packages were automatically installed and are no longer required: chromium-codecs-ffmpeg-extra gstreamer1.0-vaapi libgstreamer-plugins-bad1.0-0 libva-wayland2 Use 'sudo apt autoremove' to remove them. The following packages have been kept back: fwupd libjavascriptcoregtk-4.0-18 libwebkit2gtk-4.0-37 0 upgraded, 0 newly installed, 0 to remove and 3 not upgraded. apt-mark unhold grub* >/dev/null echo "==> Installing required packages" ==> Installing required packages debconf-set-selections <<< 'mysql-server mysql-server/root_password password password' debconf-set-selections <<< 'mysql-server mysql-server/root_password_again password password' # this enables automatic security upgrades (https://help.ubuntu.com/community/AutomaticSecurityUpdates) # resolvconf is needed for unbound to work property after disabling systemd-resolved in 18.04 gpg_package=$([[ "${ubuntu_version}" == "16.04" ]] && echo "gnupg" || echo "gpg") mysql_package=$([[ "${ubuntu_version}" == "20.04" ]] && echo "mysql-server-8.0" || echo "mysql-server-5.7") ntpd_package=$([[ "${ubuntu_version}" == "20.04" ]] && echo "systemd-timesyncd" || echo "") apt-get -y install --no-install-recommends \ acl \ apparmor \ build-essential \ cifs-utils \ cron \ curl \ debconf-utils \ dmsetup \ $gpg_package \ ipset \ iptables \ libpython2.7 \ linux-generic \ logrotate \ $mysql_package \ nfs-common \ $ntpd_package \ openssh-server \ pwgen \ resolvconf \ sshfs \ swaks \ tzdata \ unattended-upgrades \ unbound \ unzip \ xfsprogs Reading package lists... Building dependency tree... Reading state information... acl is already the newest version (2.2.53-6). cron is already the newest version (3.0pl1-136ubuntu1). dmsetup is already the newest version (2:1.02.167-1ubuntu1). iptables is already the newest version (1.8.4-3ubuntu2). logrotate is already the newest version (3.14.0-4ubuntu3). unzip is already the newest version (6.0-25ubuntu1). xfsprogs is already the newest version (5.3.0-1ubuntu2). debconf-utils is already the newest version (1.5.73). pwgen is already the newest version (2.08-2). resolvconf is already the newest version (1.82). sshfs is already the newest version (3.6.0+repack+really2.10-0ubuntu1). swaks is already the newest version (20190914.0-1). apparmor is already the newest version (2.13.3-7ubuntu5.1). build-essential is already the newest version (12.8ubuntu1.1). cifs-utils is already the newest version (2:6.9-1ubuntu0.1). curl is already the newest version (7.68.0-1ubuntu2.7). gpg is already the newest version (2.2.19-3ubuntu2.1). ipset is already the newest version (7.5-1ubuntu0.20.04.1). linux-generic is already the newest version (5.4.0.105.109). mysql-server-8.0 is already the newest version (8.0.28-0ubuntu0.20.04.3). nfs-common is already the newest version (1:1.3.4-2.5ubuntu3.4). openssh-server is already the newest version (1:8.2p1-4ubuntu0.4). systemd-timesyncd is already the newest version (245.4-4ubuntu3.15). tzdata is already the newest version (2022a-0ubuntu0.20.04). unattended-upgrades is already the newest version (2.3ubuntu0.1). libpython2.7 is already the newest version (2.7.18-1~20.04.1). unbound is already the newest version (1.9.4-2ubuntu1.2). The following packages were automatically installed and are no longer required: chromium-codecs-ffmpeg-extra gstreamer1.0-vaapi libgstreamer-plugins-bad1.0-0 libva-wayland2 Use 'sudo apt autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 3 not upgraded. echo "==> installing nginx for xenial for TLSv3 support" ==> installing nginx for xenial for TLSv3 support curl -sL http://nginx.org/packages/ubuntu/pool/nginx/n/nginx/nginx_1.18.0-2~${ubuntu_codename}_amd64.deb -o /tmp/nginx.deb # apt install with install deps (as opposed to dpkg -i) apt install -y /tmp/nginx.deb WARNING: apt does not have a stable CLI interface. Use with caution in scripts. Reading package lists... Building dependency tree... Reading state information... The following packages were automatically installed and are no longer required: chromium-codecs-ffmpeg-extra gstreamer1.0-vaapi libgstreamer-plugins-bad1.0-0 libva-wayland2 Use 'sudo apt autoremove' to remove them. The following NEW packages will be installed: nginx 0 upgraded, 1 newly installed, 0 to remove and 3 not upgraded. Need to get 0 B/853 kB of archives. After this operation, 3,056 kB of additional disk space will be used. Get:1 /tmp/nginx.deb nginx amd64 1.18.0-2~focal [853 kB] Selecting previously unselected package nginx. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 219217 files and directories currently installed.) Preparing to unpack /tmp/nginx.deb ... ---------------------------------------------------------------------- Thanks for using nginx! Please find the official documentation for nginx here: * http://nginx.org/en/docs/ Please subscribe to nginx-announce mailing list to get the most important news about nginx: * http://nginx.org/en/support.html Commercial subscriptions for nginx are available on: * http://nginx.com/products/ ---------------------------------------------------------------------- Unpacking nginx (1.18.0-2~focal) ... Setting up nginx (1.18.0-2~focal) ... Created symlink /etc/systemd/system/multi-user.target.wants/nginx.service → /lib/systemd/system/nginx.service. Processing triggers for man-db (2.9.1-1) ... Processing triggers for systemd (245.4-4ubuntu3.15) ... rm /tmp/nginx.deb # on some providers like scaleway the sudo file is changed and we want to keep the old one apt-get -o Dpkg::Options::="--force-confold" install -y --no-install-recommends sudo Reading package lists... Building dependency tree... Reading state information... sudo is already the newest version (1.8.31-1ubuntu1.2). sudo set to manually installed. The following packages were automatically installed and are no longer required: chromium-codecs-ffmpeg-extra gstreamer1.0-vaapi libgstreamer-plugins-bad1.0-0 libva-wayland2 Use 'sudo apt autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 3 not upgraded. # this ensures that unattended upgades are enabled, if it was disabled during ubuntu install time (see #346) # debconf-set-selection of unattended-upgrades/enable_auto_updates + dpkg-reconfigure does not work cp /usr/share/unattended-upgrades/20auto-upgrades /etc/apt/apt.conf.d/20auto-upgrades echo "==> Installing node.js" ==> Installing node.js readonly node_version=16.13.1 mkdir -p /usr/local/node-${node_version} curl -sL https://nodejs.org/dist/v${node_version}/node-v${node_version}-linux-x64.tar.gz | tar zxf - --strip-components=1 -C /usr/local/node-${node_version} ln -sf /usr/local/node-${node_version}/bin/node /usr/bin/node ln -sf /usr/local/node-${node_version}/bin/npm /usr/bin/npm apt-get install -y --no-install-recommends python # Install python which is required for npm rebuild Reading package lists... Building dependency tree... Reading state information... The following packages were automatically installed and are no longer required: chromium-codecs-ffmpeg-extra gstreamer1.0-vaapi libgstreamer-plugins-bad1.0-0 libva-wayland2 Use 'sudo apt autoremove' to remove them. The following additional packages will be installed: libpython2-stdlib python2 python2-minimal python2.7 python2.7-minimal Suggested packages: python2-doc python-tk python2.7-doc binfmt-support The following NEW packages will be installed: libpython2-stdlib python-is-python2 python2 python2-minimal python2.7 python2.7-minimal 0 upgraded, 6 newly installed, 0 to remove and 3 not upgraded. Need to get 1,597 kB of archives. After this operation, 4,538 kB of additional disk space will be used. Get:1 http://us.archive.ubuntu.com/ubuntu focal-updates/universe amd64 python2.7-minimal amd64 2.7.18-1~20.04.1 [1,285 kB] Get:2 http://us.archive.ubuntu.com/ubuntu focal/universe amd64 python2-minimal amd64 2.7.17-2ubuntu4 [27.5 kB] Get:3 http://us.archive.ubuntu.com/ubuntu focal-updates/universe amd64 python2.7 amd64 2.7.18-1~20.04.1 [248 kB] Get:4 http://us.archive.ubuntu.com/ubuntu focal/universe amd64 libpython2-stdlib amd64 2.7.17-2ubuntu4 [7,072 B] Get:5 http://us.archive.ubuntu.com/ubuntu focal/universe amd64 python2 amd64 2.7.17-2ubuntu4 [26.5 kB] Get:6 http://us.archive.ubuntu.com/ubuntu focal/universe amd64 python-is-python2 all 2.7.17-4 [2,496 B] Fetched 1,597 kB in 0s (3,691 kB/s) Selecting previously unselected package python2.7-minimal. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 219254 files and directories currently installed.) Preparing to unpack .../python2.7-minimal_2.7.18-1~20.04.1_amd64.deb ... Unpacking python2.7-minimal (2.7.18-1~20.04.1) ... Selecting previously unselected package python2-minimal. Preparing to unpack .../python2-minimal_2.7.17-2ubuntu4_amd64.deb ... Unpacking python2-minimal (2.7.17-2ubuntu4) ... Selecting previously unselected package python2.7. Preparing to unpack .../python2.7_2.7.18-1~20.04.1_amd64.deb ... Unpacking python2.7 (2.7.18-1~20.04.1) ... Selecting previously unselected package libpython2-stdlib:amd64. Preparing to unpack .../libpython2-stdlib_2.7.17-2ubuntu4_amd64.deb ... Unpacking libpython2-stdlib:amd64 (2.7.17-2ubuntu4) ... Setting up python2.7-minimal (2.7.18-1~20.04.1) ... Setting up python2-minimal (2.7.17-2ubuntu4) ... Selecting previously unselected package python2. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 219310 files and directories currently installed.) Preparing to unpack .../python2_2.7.17-2ubuntu4_amd64.deb ... Unpacking python2 (2.7.17-2ubuntu4) ... Selecting previously unselected package python-is-python2. Preparing to unpack .../python-is-python2_2.7.17-4_all.deb ... Unpacking python-is-python2 (2.7.17-4) ... Setting up python2.7 (2.7.18-1~20.04.1) ... Setting up libpython2-stdlib:amd64 (2.7.17-2ubuntu4) ... Setting up python2 (2.7.17-2ubuntu4) ... Setting up python-is-python2 (2.7.17-4) ... Processing triggers for mime-support (3.64ubuntu1) ... Processing triggers for gnome-menus (3.36.0-1ubuntu1) ... Processing triggers for man-db (2.9.1-1) ... Processing triggers for desktop-file-utils (0.24-1ubuntu3) ... [[ "$(python --version 2>&1)" == "Python 2.7."* ]] || die "Expecting python version to be 2.7.x" # https://docs.docker.com/engine/installation/linux/ubuntulinux/ echo "==> Installing Docker" ==> Installing Docker # create systemd drop-in file. if you channge options here, be sure to fixup installer.sh as well mkdir -p /etc/systemd/system/docker.service.d echo -e "[Service]\nExecStart=\nExecStart=/usr/bin/dockerd -H fd:// --log-driver=journald --exec-opt native.cgroupdriver=cgroupfs --storage-driver=overlay2 --experimental --ip6tables" > /etc/systemd/system/docker.service.d/cloudron.conf # there are 3 packages for docker - containerd, CLI and the daemon readonly docker_version=20.10.12 curl -sL "https://download.docker.com/linux/ubuntu/dists/${ubuntu_codename}/pool/stable/amd64/containerd.io_1.4.9-1_amd64.deb" -o /tmp/containerd.deb curl -sL "https://download.docker.com/linux/ubuntu/dists/${ubuntu_codename}/pool/stable/amd64/docker-ce-cli_${docker_version}~3-0~ubuntu-${ubuntu_codename}_amd64.deb" -o /tmp/docker-ce-cli.deb curl -sL "https://download.docker.com/linux/ubuntu/dists/${ubuntu_codename}/pool/stable/amd64/docker-ce_${docker_version}~3-0~ubuntu-${ubuntu_codename}_amd64.deb" -o /tmp/docker.deb # apt install with install deps (as opposed to dpkg -i) apt install -y /tmp/containerd.deb /tmp/docker-ce-cli.deb /tmp/docker.deb WARNING: apt does not have a stable CLI interface. Use with caution in scripts. Reading package lists... Building dependency tree... Reading state information... The following packages were automatically installed and are no longer required: chromium-codecs-ffmpeg-extra gstreamer1.0-vaapi libgstreamer-plugins-bad1.0-0 libva-wayland2 Use 'sudo apt autoremove' to remove them. The following additional packages will be installed: git git-man liberror-perl pigz Suggested packages: aufs-tools cgroupfs-mount | cgroup-lite git-daemon-run | git-daemon-sysvinit git-doc git-el git-email git-gui gitk gitweb git-cvs git-mediawiki git-svn Recommended packages: docker-ce-rootless-extras docker-scan-plugin The following NEW packages will be installed: containerd.io docker-ce docker-ce-cli git git-man liberror-perl pigz 0 upgraded, 7 newly installed, 0 to remove and 3 not upgraded. Need to get 5,523 kB/92.1 MB of archives. After this operation, 417 MB of additional disk space will be used. Get:1 http://us.archive.ubuntu.com/ubuntu focal/universe amd64 pigz amd64 2.4-1 [57.4 kB] Get:2 /tmp/containerd.deb containerd.io amd64 1.4.9-1 [24.7 MB] Get:3 http://us.archive.ubuntu.com/ubuntu focal/main amd64 liberror-perl all 0.17029-1 [26.5 kB] Get:4 http://us.archive.ubuntu.com/ubuntu focal-updates/main amd64 git-man all 1:2.25.1-1ubuntu3.2 [884 kB] Get:5 http://us.archive.ubuntu.com/ubuntu focal-updates/main amd64 git amd64 1:2.25.1-1ubuntu3.2 [4,554 kB] Get:6 /tmp/docker-ce-cli.deb docker-ce-cli amd64 5:20.10.12~3-0~ubuntu-focal [40.7 MB] Get:7 /tmp/docker.deb docker-ce amd64 5:20.10.12~3-0~ubuntu-focal [21.2 MB] Fetched 5,523 kB in 1s (8,325 kB/s) Selecting previously unselected package pigz. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 219342 files and directories currently installed.) Preparing to unpack .../0-pigz_2.4-1_amd64.deb ... Unpacking pigz (2.4-1) ... Selecting previously unselected package containerd.io. Preparing to unpack .../1-containerd.deb ... Unpacking containerd.io (1.4.9-1) ... Selecting previously unselected package docker-ce-cli. Preparing to unpack .../2-docker-ce-cli.deb ... Unpacking docker-ce-cli (5:20.10.12~3-0~ubuntu-focal) ... Selecting previously unselected package docker-ce. Preparing to unpack .../3-docker.deb ... Unpacking docker-ce (5:20.10.12~3-0~ubuntu-focal) ... Selecting previously unselected package liberror-perl. Preparing to unpack .../4-liberror-perl_0.17029-1_all.deb ... Unpacking liberror-perl (0.17029-1) ... Selecting previously unselected package git-man. Preparing to unpack .../5-git-man_1%3a2.25.1-1ubuntu3.2_all.deb ... Unpacking git-man (1:2.25.1-1ubuntu3.2) ... Selecting previously unselected package git. Preparing to unpack .../6-git_1%3a2.25.1-1ubuntu3.2_amd64.deb ... Unpacking git (1:2.25.1-1ubuntu3.2) ... Setting up liberror-perl (0.17029-1) ... Setting up containerd.io (1.4.9-1) ... Created symlink /etc/systemd/system/multi-user.target.wants/containerd.service → /lib/systemd/system/containerd.service. Setting up docker-ce-cli (5:20.10.12~3-0~ubuntu-focal) ... Setting up pigz (2.4-1) ... Setting up git-man (1:2.25.1-1ubuntu3.2) ... Setting up docker-ce (5:20.10.12~3-0~ubuntu-focal) ... Created symlink /etc/systemd/system/multi-user.target.wants/docker.service → /lib/systemd/system/docker.service. Created symlink /etc/systemd/system/sockets.target.wants/docker.socket → /lib/systemd/system/docker.socket. Job for docker.service failed because the control process exited with error code. See "systemctl status docker.service" and "journalctl -xe" for details. invoke-rc.d: initscript docker, action "start" failed. ● docker.service - Docker Application Container Engine Loaded: loaded (]8;;file://ubuntu/lib/systemd/system/docker.service/lib/systemd/system/docker.service]8;;; enabled; vendor preset: enabled) Drop-In: /etc/systemd/system/docker.service.d └─]8;;file://ubuntu/etc/systemd/system/docker.service.d/cloudron.confcloudron.conf]8;; Active: activating (auto-restart) (Result: exit-code) since Fri 2022-03-25 12:48:30 CDT; 6ms ago TriggeredBy: ● docker.socket Docs: ]8;;https://docs.docker.comhttps://docs.docker.com]8;; Process: 42189 ExecStart=/usr/bin/dockerd -H fd:// --log-driver=journald --exec-opt native.cgroupdriver=cgroupfs --storage-driver=overlay2 --experimental --ip6tables [0;1;31m(code=exited, status=1/FAILURE)[0m Main PID: 42189 (code=exited, status=1/FAILURE) dpkg: error processing package docker-ce (--configure): installed docker-ce package post-installation script subprocess returned error exit status 1 Setting up git (1:2.25.1-1ubuntu3.2) ... Processing triggers for man-db (2.9.1-1) ... Processing triggers for systemd (245.4-4ubuntu3.15) ... Errors were encountered while processing: docker-ce E: Sub-process /usr/bin/dpkg returned an error code (1) -
@Rawlin It seems now docker is not installed (not a DNS issue anymore). What is the output of
systemctl status docker.serviceandjournalctl -xe?● docker.service - Docker Application Container Engine Loaded: loaded (/lib/systemd/system/docker.service; enabled; vendor preset> Drop-In: /etc/systemd/system/docker.service.d └─cloudron.conf Active: active (running) since Fri 2022-03-25 12:48:33 CDT; 7min ago TriggeredBy: ● docker.socket Docs: https://docs.docker.com Main PID: 43049 (dockerd) Tasks: 13 Memory: 27.7M CGroup: /system.slice/docker.service └─43049 /usr/bin/dockerd -H fd:// --log-driver=journald --exec-opt> Mar 25 12:48:33 ubuntu dockerd[43049]: time="2022-03-25T12:48:33.443610168-05:0> Mar 25 12:48:33 ubuntu dockerd[43049]: time="2022-03-25T12:48:33.443653667-05:0> Mar 25 12:48:33 ubuntu dockerd[43049]: time="2022-03-25T12:48:33.443659767-05:0> Mar 25 12:48:33 ubuntu dockerd[43049]: time="2022-03-25T12:48:33.443849664-05:0> Mar 25 12:48:33 ubuntu dockerd[43049]: time="2022-03-25T12:48:33.604200242-05:0> Mar 25 12:48:33 ubuntu dockerd[43049]: time="2022-03-25T12:48:33.688098022-05:0> Mar 25 12:48:33 ubuntu dockerd[43049]: time="2022-03-25T12:48:33.717088766-05:0> Mar 25 12:48:33 ubuntu dockerd[43049]: time="2022-03-25T12:48:33.717299162-05:0> Mar 25 12:48:33 ubuntu systemd[1]: Started Docker Application Container Engine. Mar 25 12:48:33 ubuntu dockerd[43049]: time="2022-03-25T12:48:33.775200652-05:0> lines 1-23/23 (END)-- Support: http://www.ubuntu.com/support -- -- The unit UNIT has successfully entered the 'dead' state. Mar 25 12:56:14 ubuntu tracker-store[45367]: OK Mar 25 12:56:14 ubuntu systemd[1280]: tracker-store.service: Succeeded. -- Subject: Unit succeeded -- Defined-By: systemd -- Support: http://www.ubuntu.com/support -- -- The unit UNIT has successfully entered the 'dead' state. Mar 25 12:56:23 ubuntu sudo[46581]: rawlin : TTY=pts/0 ; PWD=/home/rawlin ; U> Mar 25 12:56:23 ubuntu sudo[46581]: pam_unix(sudo:session): session opened for > Mar 25 12:56:56 ubuntu rtkit-daemon[833]: Supervising 5 threads of 3 processes > Mar 25 12:56:56 ubuntu rtkit-daemon[833]: Supervising 5 threads of 3 processes > Mar 25 12:57:31 ubuntu sudo[46581]: pam_unix(sudo:session): session closed for > Mar 25 12:57:51 ubuntu sudo[46631]: rawlin : TTY=pts/0 ; PWD=/home/rawlin ; U> Mar 25 12:57:51 ubuntu sudo[46631]: pam_unix(sudo:session): session opened for > Mar 25 12:58:12 ubuntu sudo[46631]: pam_unix(sudo:session): session closed for > Mar 25 12:58:15 ubuntu sudo[46638]: rawlin : TTY=pts/0 ; PWD=/home/rawlin ; U> Mar 25 12:58:15 ubuntu sudo[46638]: pam_unix(sudo:session): session opened for > Mar 25 12:58:58 ubuntu sudo[46638]: pam_unix(sudo:session): session closed for > Mar 25 12:59:00 ubuntu sudo[46644]: rawlin : TTY=pts/0 ; PWD=/home/rawlin ; U> Mar 25 12:59:00 ubuntu sudo[46644]: pam_unix(sudo:session): session opened for > lines 2469-2491/2491 (END) -
● docker.service - Docker Application Container Engine Loaded: loaded (/lib/systemd/system/docker.service; enabled; vendor preset> Drop-In: /etc/systemd/system/docker.service.d └─cloudron.conf Active: active (running) since Fri 2022-03-25 12:48:33 CDT; 7min ago TriggeredBy: ● docker.socket Docs: https://docs.docker.com Main PID: 43049 (dockerd) Tasks: 13 Memory: 27.7M CGroup: /system.slice/docker.service └─43049 /usr/bin/dockerd -H fd:// --log-driver=journald --exec-opt> Mar 25 12:48:33 ubuntu dockerd[43049]: time="2022-03-25T12:48:33.443610168-05:0> Mar 25 12:48:33 ubuntu dockerd[43049]: time="2022-03-25T12:48:33.443653667-05:0> Mar 25 12:48:33 ubuntu dockerd[43049]: time="2022-03-25T12:48:33.443659767-05:0> Mar 25 12:48:33 ubuntu dockerd[43049]: time="2022-03-25T12:48:33.443849664-05:0> Mar 25 12:48:33 ubuntu dockerd[43049]: time="2022-03-25T12:48:33.604200242-05:0> Mar 25 12:48:33 ubuntu dockerd[43049]: time="2022-03-25T12:48:33.688098022-05:0> Mar 25 12:48:33 ubuntu dockerd[43049]: time="2022-03-25T12:48:33.717088766-05:0> Mar 25 12:48:33 ubuntu dockerd[43049]: time="2022-03-25T12:48:33.717299162-05:0> Mar 25 12:48:33 ubuntu systemd[1]: Started Docker Application Container Engine. Mar 25 12:48:33 ubuntu dockerd[43049]: time="2022-03-25T12:48:33.775200652-05:0> lines 1-23/23 (END)-- Support: http://www.ubuntu.com/support -- -- The unit UNIT has successfully entered the 'dead' state. Mar 25 12:56:14 ubuntu tracker-store[45367]: OK Mar 25 12:56:14 ubuntu systemd[1280]: tracker-store.service: Succeeded. -- Subject: Unit succeeded -- Defined-By: systemd -- Support: http://www.ubuntu.com/support -- -- The unit UNIT has successfully entered the 'dead' state. Mar 25 12:56:23 ubuntu sudo[46581]: rawlin : TTY=pts/0 ; PWD=/home/rawlin ; U> Mar 25 12:56:23 ubuntu sudo[46581]: pam_unix(sudo:session): session opened for > Mar 25 12:56:56 ubuntu rtkit-daemon[833]: Supervising 5 threads of 3 processes > Mar 25 12:56:56 ubuntu rtkit-daemon[833]: Supervising 5 threads of 3 processes > Mar 25 12:57:31 ubuntu sudo[46581]: pam_unix(sudo:session): session closed for > Mar 25 12:57:51 ubuntu sudo[46631]: rawlin : TTY=pts/0 ; PWD=/home/rawlin ; U> Mar 25 12:57:51 ubuntu sudo[46631]: pam_unix(sudo:session): session opened for > Mar 25 12:58:12 ubuntu sudo[46631]: pam_unix(sudo:session): session closed for > Mar 25 12:58:15 ubuntu sudo[46638]: rawlin : TTY=pts/0 ; PWD=/home/rawlin ; U> Mar 25 12:58:15 ubuntu sudo[46638]: pam_unix(sudo:session): session opened for > Mar 25 12:58:58 ubuntu sudo[46638]: pam_unix(sudo:session): session closed for > Mar 25 12:59:00 ubuntu sudo[46644]: rawlin : TTY=pts/0 ; PWD=/home/rawlin ; U> Mar 25 12:59:00 ubuntu sudo[46644]: pam_unix(sudo:session): session opened for > lines 2469-2491/2491 (END)@Rawlin said in Help please failing setup of cloudron:
Mar 25 12:56:14 ubuntu tracker-store[45367]: OK
Are you installing on Ubuntu Desktop or Ubuntu Server ?
It seems that docker is running fine, so it's not clear to me what is happening
Is it possible for me to ssh and inspect the server? If so, would be great if you can write to me at support@cloudron.io and I can try to make a proper fix. -
So, what I found so far is:
I can download things from all sites just fine, but not nginx!
root@Ubuntu:/home/rawlin# curl https://screenshots.cloudron.io/ca.scrumblr.cloudronapp/1.png -o /tmp/foo % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 403k 100 403k 0 0 376k 0 0:00:01 0:00:01 --:--:-- 376kroot@Ubuntu:/home/rawlin# curl -L http://nginx.org/packages/ubuntu/pool/nginx/n/nginx/nginx_1.18.0-2~${ubuntu_codename}_amd64.deb -o /tmp/nginx.deb % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 1 833k 1 15646 0 0 259 0 0:54:54 0:01:00 0:53:54 0 curl: (56) Recv failure: Connection reset by peer root@Ubuntu:/home/rawlin# wget http://nginx.org/packages/ubuntu/pool/nginx/n/nginx/nginx_1.18.0-2~${ubuntu_codename}_amd64.deb --2022-03-25 17:39:28-- http://nginx.org/packages/ubuntu/pool/nginx/n/nginx/nginx_1.18.0-2~focal_amd64.deb Resolving nginx.org (nginx.org)... 3.125.197.172, 52.58.199.22, 2a05:d014:edb:5702::6, ... Connecting to nginx.org (nginx.org)|3.125.197.172|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 853262 (833K) [application/octet-stream] Saving to: ‘nginx_1.18.0-2~focal_amd64.deb’ nginx_1.18.0-2~focal_amd64.deb 1%[> ] 15.28K --.-KB/s in 59s 2022-03-25 17:40:28 (264 B/s) - Read error at byte 15646/853262 (Connection reset by peer). Retrying. --2022-03-25 17:40:29-- (try: 2) http://nginx.org/packages/ubuntu/pool/nginx/n/nginx/nginx_1.18.0-2~focal_amd64.deb Connecting to nginx.org (nginx.org)|3.125.197.172|:80... connected. HTTP request sent, awaiting response... 206 Partial Content Length: 853262 (833K), 837616 (818K) remaining [application/octet-stream] Saving to: ‘nginx_1.18.0-2~focal_amd64.deb’ nginx_1.18.0-2~focal_amd64.deb 3%[+> ] 30.53K --.-KB/s in 59s 2022-03-25 17:41:30 (264 B/s) - Read error at byte 31259/853262 (Connection reset by peer). Retrying.So, not a curl/wget issue, some network issue when downloading from nginx.org. Strange.
-
I can download small files from nginx.org just fine, other files just stall.
But looks like I found the issue. nginx.org resolves to 3.125.197.172, 52.58.199.22, 2a05:d014:edb:5702::6 . If I use the
3.125.197.172, it does not work. But52.58.199.22works!root@Ubuntu:/home/rawlin# wget http://nginx.org/packages/ubuntu/pool/nginx/n/nginx/nginx_1.18.0-2~${ubuntu_codename}_amd64.deb --2022-03-25 17:50:02-- http://nginx.org/packages/ubuntu/pool/nginx/n/nginx/nginx_1.18.0-2~focal_amd64.deb Resolving nginx.org (nginx.org)... 52.58.199.22 Connecting to nginx.org (nginx.org)|52.58.199.22|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 853262 (833K) [application/octet-stream] Saving to: ‘nginx_1.18.0-2~focal_amd64.deb’ nginx_1.18.0-2~focal_amd64.deb 100%[================================================================>] 833.26K 1.16MB/s in 0.7s 2022-03-25 17:50:03 (1.16 MB/s) - ‘nginx_1.18.0-2~focal_amd64.deb’ saved [853262/853262] -
The workaround here was simply to edit
/etc/resolv.confand put this:52.58.199.22 nginx.orgThen, running the setup script again works.
@girish Good for you for helping this user with troubleshooting a totally non-Cloudron related issue. I've come across this weird nginx error too. The fix was also tweaking the resolve.conf file, but I hadn't realized I can enter the sort of thing you did. Cool.
-
G girish has marked this topic as solved on
-
G girish referenced this topic on
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login