Baserow Cloudron app - Airtable alternative

bram

I have a quick follow up question. Is it possible for Cloudron to generate a unique secret key and provide that as environment variable? Baserow depends on a secret key to create password reset and invite tokens, but this needs to be unique value for each installation. Otherwise if everyone uses the same key, it will become possible to create password reset tokens which is a security issue.

nebulon

@bram similar to cookie secrets, this usually is done in the startup script (start.sh).

Something on the lines of (just some pseudo bash here):

if [[ ! -f /app/data/.secret ]]; then
    echo "SECRET_ENV=$(some way to generate a secret)" > /app/data/.secret
fi

source /app/data/.secret

Very much depends on how the app consumes this. Sometime like gitlab they have a secrets file like: https://git.cloudron.io/cloudron/gitlab-app/-/blob/master/start.sh#L92

mehdi

@bram an example here : https://git.cloudron.io/mehdi/river/-/blob/master/start.sh#L64

if [ ! -f /app/data/session.secret ]; then
  dd if=/dev/urandom bs=256 count=1 | base64 > /app/data/session.secret
fi

bram

This will work for my use case. Thanks!

ianhyzy

This looks like a fantastic tool, can't wait to try it out on Cloudron!

timconsidine

@ianhyzy Ditto
Is the status of this known ? Coming to a cloudron near me soon ??

doodlemania2

@timconsidine It's available now, just not in the store. Just follow instructions above and you'll be up and running in no time.

timconsidine

@doodlemania2 Cheers !

timconsidine

This post is deleted!

timconsidine

@doodlemania2 Having trouble with this :
Repeat errors like App installation error: Installation failed: Unable to pull image tcmbp132021/baserow:1:3:0. Please check the network or if the image needs authentication. statusCode: 400

I can build locally and I can push docker image.
But interestingly docker for desktop reports 3.25Gb locally and repository only 1.1Gb

Does the image need authentication ??
Or maybe there is indeed a network error
Grrrr

timconsidine

And when I run the container locally, it starts and immediately fails
http://ocalhost:3000 doesn't respond and docker for desktop reports not started
I think there is a build problem

timconsidine

Bizarre
Now working
Maybe there was some network glitch going on
I did do docker trust just in case
But had to delete images multiple times and try again
Anyway now deployed to and working on cloudron - yay !
Thank you @bram !!

thetomester13

@staff any thoughts on publishing Baserow as unstable? I've been using it on and off and it's quite smooth. Not sure what else is needed from a packaging perspective though.

girish

@bram Are you open to have this app published in the Cloudron store? This involves moving the packaging to the git.cloudron.io and also have automated tests (we can help with both).

bram

@timconsidine Glad to hear that it now works for you!

bram

@girish Apologies for my super late response. I don't check the Cloudron forum that often, but luckily @tomershivani reached out to me via email notifying me about your question. I would love to have Baserow in the Cloudron app store. I am not sure which steps I exactly need to make. Is there a documentation page about this? Or is it just a matter of creating a new repo on git.cloudron.io containing the files that now live here https://gitlab.com/bramw/baserow/-/tree/develop/deploy/cloudron, add automated tests and you will do the rest? Would love to learn a bit more about this process and help with the automated tests would be much appreciated.

girish

@bram I wrote up a quick publishing doc here - https://docs.cloudron.io/packaging/publishing/ . If you can just put the deploy code in git.cloudron.io as a separate repo with a license, I can take it from there. I only needed your go ahead to move this forward

robi

@girish said in Baserow Cloudron app - Airtable alternative:

I wrote up a quick publishing doc here - https://docs.cloudron.io/packaging/publishing/ .

Beautiful!

One small typo found:

At this point, Cloudron team will look into your package and get it ready from publishing.

from = for

bram

@girish I just created an account on git.cloudron.io, but it seems like I can't create a new repository. When creating a new project I get the error "Namespace is not valid". All the other repo's are in the cloudron project https://git.cloudron.io/cloudron, but it seems like I can't create a new repo there. Am I missing something?

Alternatively, you can find the deploy code in our own public repo and copy it from there https://gitlab.com/bramw/baserow/-/tree/master/deploy/cloudron. It already has an MIT license there.

How would it work in the future if we release a new version of Baserow? Can we deploy the latest version to the app store?

jdaviescoates

@bram said in Baserow Cloudron app - Airtable alternative:

I can't create a new repo there. Am I missing something?

I'm sure @girish will reply similarly shortly but I they'll need to give your account access because by default they have it locked down

bram

@jdaviescoates That makes sense. I'll await his response.

girish

@bram awesome, I will take it from here! Give me a day or two to look into this.

doodlemania2

@girish I've been using @bram 's instructions and doing an alt-ron host of it. it's been a snap to maintain so hopefully it can come to the store soon
(wish i had time to assist, life got in the way )

zagzoog

I just installed Baseerow on Cloudron. Is perfect for my use case. running beautifully. my question is regarding the web socket. I am not sure how to access it. Baserow is accessible through a sub-domain. what would be the url for the web socket api?
Thank you

bram

@zagzoog The web socket URL would be on wss://api.baserow.io/ws/core/?jwt_token=YOUR_JWT_TOKEN where you would replace api.baserow.io with your self hosted domain. So, if your Baserow copy runs on baserow.example.com, you should replace it with that. Both the backend and the web-frontend run on the same domain in Cloudron. More information about the web sockets and also some examples how to connect directly can be found here https://baserow.io/docs/getting-started%2Fweb-socket-api.

bram

@girish Could you share any progress on having Baserow in the Cloudron App Store?

girish

@bram Not yet, sorry been backlogged a lot. I will get to this soonish. Hopefully next week.

humptydumpty

@girish just want to remind you about Baserow

jeau

@girish Baserow 1.6 just released

https://baserow.io/blog/september-2021-release-of-baserow

thanks @bram

potemkin_ai

@girish have you had any chance to check on that since?

It feels that adding baserow shall be quick and easy - I follow up the instruction from the site and installed it on Cloudron without any problems (1.6 version it was).

I shall also admin, that the app is of the very nice UI and feels very good, having as well a solid roadmap for futher development.

If there is anything I can do to speed up that process (I don't know - upvote something or whatever) - please, let me know!

@jeau , thanks for packing this! It's awesome!

jeau

@potemkin_ai Thanks, but I didn't package baserow, @girish and @bram do that. I use this application like you and I can't wait to find it in the Store.

potemkin_ai

@jeau apologies for the mistake and thanks for correcting it!

@bram, thank you for the work done!

Hope this will quickly make it to Cloudron.

girish

Not yet, we have to start looking into apps next week. This week we are working on the Cloudron release (almost there!).

potemkin_ai

@girish have a good one!

bram

Thanks for the kind words @potemkin_ai!

Good luck with the release @girish! I know from my experience that those can be a bit stressful. Let my know if there is anything that I can help you with regarding moving Baserow to the Cloudron app store.

yusf

Ante up https://www.nocodb.com/

jdaviescoates

@yusf there's a wish list post for that here:
https://forum.cloudron.io/post/32032

jdaviescoates

@bram hopefully once @staff have got the 7.0 release rolled out they'll start to prioritise getting some of the already packaged app contributions into the app store ASAP, and IMHO apps that have kindly been packaged by their developers (like Baserow and Chatwoot, and I think possibly some others too. EDIT Appsmith is another) should get priority. Very important to maintain good will of contributors.

timconsidine

@jdaviescoates / @bram : FWIW my unofficial Baserow package app is working fine in Cloudron !

There is a clear benefit to an app being supported, not least upgrades are easier. But to all those wanting it now, well try the unofficial one. It will tide you over.

Bruno

@timconsidine
I am very interested to test your "unofficiel" package to have Baserow in my Cloudron.
Could you share your tips or link to install it, please ?

timconsidine

@bruno sure

Maybe best is to visit https://github.com/bram2w/baserow/blob/master/docs/guides/installation/install-on-cloudron.md

That has a tutorial on installing to Cloudron
I think I did it slightly different, but as that comes from @bram, best to start with that.

In general, installing a custom app package that someone else has made (still beyond me to make one myself) is fairly simple. Article above covers it.

ensure you have Docker Desktop installed LOCALLY (not server)
ensure you have a docker repo (I use docker hub free account)
ensure you have Cloudron CLI installed LOCALLY
clone the repo (which should have all files needed)
cd to the directory
docker build -t <yourreponame>/<appname>:<tag>
docker push <yourreponame>/<appname>:<tag>
cloudron install --image <yourreponame>/<appname>:<tag>
Follow the instruction.

Generally fairly easy.
Shout if you face any issues

robi

@timconsidine since you've already built it, it may be a good idea to connect with @atridad who has an unofficial repository of packaged apps before they're published in the App store.

Sharing the docker hub repo makes it easier for others to try, and there is a feature in Cloudron now to set a custom repo.

timconsidine

@robi sure will do

although my build seems old now : V1.3
https://hub.docker.com/repository/docker/tcmbp132021/baserow
Must update it

I think I recall that someone here said CloudronManifest.json must be in the same directory when attempting to use cloudron cli, so probably still worth following @bram guide

Bruno

@timconsidine Many thanks!

girish

@bram Sorry, this is blocked totally by us. We have already started updating some of the long standing apps and will also start publishing many of the already available apps this week and the next.

nebulon

Hi everyone, I was finally able to pickup the package, to get this forward into our app library.

@bram already did a wonderful job and for the moment I only had to do some cleanup of the package, not because it was wrong, but really only so the package is consistent with our other packages. This is less about the functionality but merely so it is easier for us to deal with them.

Also since we tend to update our tests and the test dependencies quite often, I also moved @bram's original files into a repo in our own gitlab next to all the other apps: https://git.cloudron.io/cloudron/baserow-app
@bram you should also have push rights to that repo by now.

To give some outlook, I think I will only have to now add the e2e tests for it and I will publish this in the next few days as unstable for everyone interested to test.

bram

@nebulon It's great to hear that you've added Baserow. I saw an email notifying me that I have developer permissions to the project . Let me know if there is anything that I can help you with in the meantime.

How would it work if we we're releasing a new version in the future? Should we then create a merge request in GitLab with the necessary changes?

nebulon

@bram usually we track upstream releases and then adjust the package repo accordingly, then build a new app package from that and run the tests. Once done we issue a new package release. So unless there are specific data migration steps to be made on a new release, I think you don't have to do anything from your side as we will maintain the package.
You have developer rights mainly, since you know your app better and possibly there might be useful adjustments to be made for the package in future versions, so feel free to push those directly into the app repo then.

potemkin_ai

@nebulon great, thank you for hearing and picking this up!

nebulon

I will lock this topic since the app is published by now and the forum section is https://forum.cloudron.io/category/136/baserow

Cloudron makes it easy to run web apps like WordPress, Nextcloud, GitLab on your server. Find out more or install now.

Solved Baserow Cloudron app - Airtable alternative