Mixpost

[girish]

@plusone-nick said in Mixpost:

[2023-08-06 22:56:13] production.ERROR: Not enough arguments (missing: "name"). {"exception":"[object] (Symfony\Component\Console\Exception\RuntimeException(code: 0): Not enough arguments (missing: "name"). at /app/data/mixpost-pro-team-app/vendor/symfony/console/Input/Input.php:76)

this seems like some CLI is expecting more arguments (specifically --name or something)

[plusone-nick]

All errors cleared, and the system has been up for about two days going on three so i think it's safe to say its usable

Still need a workaround for one last step to complete: configure a process monitor Supervisor as it wants to write to /etc/supervisor/conf.d

Other than that i will document the steps i took and share them here before the end of the week

[plusone-nick]

Cloudron + Mixpost + LAMP = +1

Note: this is for the Pro/Enterprise version of Mixpost

On a fresh LAMP install open a terminal

Step 1:

 cd /app/data/

Step 2:

 composer create-project inovector/mixpost-pro-team-app

Step 3: From the File Manager: You can use command line if you like

 Change owner of the mixpost-pro-team-app folder to www-data

Step 4 Enter the mixpost-pro-team-app folder and open .env and Populate:

APP_URL=https://YOUR-DOMAIN
APP_ENV=production (WHEN READY)
APP_DEBUG=fale

Step 5: Populate SQL (creds @: /app/data/credentials.txt)

DB_HOST=172.18.30.1            /
DB_PORT=3306                     /
DB_DATABASE=CLOUDRON_MYSQL_DATABASE
DB_USERNAME=CLOUDRON_MYSQL_USERNAME
DB_PASSWORD=CLOUDRON_MYSQL_PASSWORD

NOTE: I had to put the slash / after the two DB_ env vars because the numbers were causing a line bug in the markdown while generating this post so make sure to remove them if you copy and paste the whole code block

Step 6: Populate REDIS (creds @: /app/data/credentials.txt )

REDIS_HOST=CLOUDRON_REDIS_HOST
REDIS_PASSWORD=CLOUDRON_REDIS_PASSWORD
REDIS_PORT=6379

- Save and Close

Step 7: Configure Database Tables:

cd /app/data/mixpost-pro-team-app  
php artisan queue:batches-table
php artisan migrate
php artisan vendor:publish --tag=mixpost-config

Step 8: go to and edit

/app/data/apache/app.conf

Change both instances of: /app/data/public
To:

/app/data/mixpost-pro-team-app/public

- Save and Close

Step 9: On the CRON tab paste and save below:

* * * * * cd /app/data/mixpost-pro-team-app && php artisan schedule:run >> /app/data/null 2>&1

Step 10: Install Supervisor:

sudo apt-get install supervisor

Step 11: Cache Config:

php artisan config:cache

Step 12: Cache Routes:

php artisan route:cache

Step 13: Restart the APP to save the config

Step 14: Go to /app/data/mixpost-pro-team-app/ & Then Start Horizon

cd /app/data/mixpost-pro-team-app/
php artisan horizon

Step 15: Go to the landing page and register!

🦾

---

NOTE: i think there is still a need to figure out a solution to configure Supervisor: https://docs.inovector.com/books/server-configuration-mixpost/page/installing-configuring-supervisor

• Until then manually start the app with php artisan horizon as needed

• I Only have one license so I had to retrace the steps I took. If there are any errors please forgive me!

• If anyone runs into issues let me know. I will help troubleshoot and can rebuild my instance as needed =]
  ️+1

[humptydumpty]

@plusone-nick I have a Pro license and haven't been able to try Mixpost yet. I'll give it shot soon and report back. Thank you so much for getting this going!!

[humptydumpty]

@plusone-nick Step 7 error: Could not open input file: artisan

I decided to continue anyway. Step 8 & 9 were easy. Step 10 error: bash: cd: app/Console/: No such file or directory

This is where I stopped. To backtrack a bit, what exactly do you mean by populate? I might have messed up Step 5 & 6. I tried to use the variables and not the actual values since it's mentioned they change on app restart so, CLOUDRON_MYSQL_DATABASE but that didn't get me through Step 7. Then, I tried the actual values of each field which were located in /app/data/credentials.txt. That didn't help with Step 7 either.

[plusone-nick]

@humptydumpty you can't use the variables until you set them in the .env file
so you have to remove the placeholders like "CLOUDRON_MYSQL_DATABASE" and put the value for that variable which is located in /app/data/credentials.txt

They are like 16 and 32 characters long

[humptydumpty]

OK, I made the changes and this is my .env file:

Still, step 7 with same error.

[humptydumpty]

I think I'm doing Step 7 wrong. Do you paste all 3 commands together in the terminal or do these go elsewhere?

Edit: I'm reading thru Mixpost's docs, and I think I prematurely changed the APP_ENV to production. They have that listed after doing the artisan stuff and when the UI is up. I'll try again tomorrow with a fresh mind. Doing this after work is a horrible idea

[plusone-nick]

@humptydumpty do them one at a time and i think you can change it back. I will try a build from scratch tomorrow and go thru the docs to update as needed.

[plusone-nick]

@humptydumpty i see it - your DB host is wrong: should be DB_HOST=172.18.30.1
everything else looks correct.

[humptydumpty]

I changed DB_Host to:

• 172.18.30.1
• 172.18.0.1 (this is the LDAP port for me)
• 172.0.0.1 (this was the default in there originally)

Then, I tried those values for the both fields, DB_Host and for REDIS_HOST just in case they both needed to match.

Same step 7 error. I'm going to start again with a fresh LAMP install.

[humptydumpty]

I figured it out. I had to cd into the mixpost-pro-team-app folder before doing step 7.

cd /app/data/mixpost-pro-team-app

Line of 1 step 7 went OK. Line 2 with an error. Line 3 went OK.

In Connection.php line 795:
                                                                                                                                                                                                                  
  SQLSTATE[42S01]: Base table or view already exists: 1050 Table 'job_batches' already exists (Connection: mysql, SQL: create table `job_batches` (`id` varchar(255) not null, `name` varchar(255) not null, `to  
  tal_jobs` int not null, `pending_jobs` int not null, `failed_jobs` int not null, `failed_job_ids` longtext not null, `options` mediumtext null, `cancelled_at` int null, `created_at` int not null, `finished_  
  at` int null) default character set utf8mb4 collate 'utf8mb4_unicode_ci')                                                                                                                                       
                                                                                                                                                                                                                  

In Connection.php line 580:
                                                                                               
  SQLSTATE[42S01]: Base table or view already exists: 1050 Table 'job_batches' already exists

Step 10: I nano'd into kernel.php and removed the two references of void, but there's no &. I found actual lines of code in there, so I left those untouched and saved.

Step 11: not sure whether to stay in app/code or cd into /data or the mixpost app folder but running step 11's command shows this:

Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
supervisor is already the newest version (4.2.1-1ubuntu1).
W: Not using locking for read only lock file /var/lib/dpkg/lock-frontend
W: Not using locking for read only lock file /var/lib/dpkg/lock
E: Archives directory /var/cache/apt/archives/partial is missing. - Acquire (2: No such file or directory)

Step 12: I encouter an error after running the command

PHP Parse error:  syntax error, unexpected token "{" in /app/data/mixpost-pro-team-app/app/Console/Kernel.php on line 14

Going to stop here for now. Changed my mind.

I changed the environment from local to production. The app is live on my subdomain, despite all the errors. Woohoo!

What does your kernel.php file look like?

[plusone-nick]

@humptydumpty remove the ":" at the end of each function and test

[humptydumpty]

It's all green.

I am still getting an error on step 11 when installing supervisor.

Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
supervisor is already the newest version (4.2.1-1ubuntu1).
W: Not using locking for read only lock file /var/lib/dpkg/lock-frontend
W: Not using locking for read only lock file /var/lib/dpkg/lock
E: Archives directory /var/cache/apt/archives/partial is missing. - Acquire (2: No such file or directory)

But the rest of the steps went smoothly. Now to the real questions:

• What does the upgrade process look like?
• Do Cloudron backups work in case things go south?

[plusone-nick]

Nice!!! 🫡

You already have Supervisor it so no need to worry

• Upgrade process look like?: idk yet as this is new to me too, I'd image its close to the install process. Since we are running off of LAMP and Composer - Mixpost plays nicely. So it should not be too cumbersome* (Famous Last Words, lol)

• Cloudron backups DO cover whatever is in /app/data/.... in the LMAP app so yeah

You wont be the only one going through the process 🦾

[privsec]

So is there a final version of docs?

[plusone-nick]

@privsec Ive updated the docs with @humptydumpty's note on CD'ing to the app dir so just follow the current steps you should be good

[lao9s]

Hi everyone,
Thank you @plusone-nick for your contribution. I'm glad to see that the community has found a solution to install Mixpost in Cloudron.

I have a question, why do we have to delete the voids from the Kernel file?

[plusone-nick]

@lao9s Hey Dima,

Thanks!
I recall that I was getting some error with Kernel.php, so I was really just shooting in the dark trying things. It could have been resolved via another change I made, and I was confusing the results.

Will have to go back and try to reproduce the error. But assuming I broke or bypassed something with the change, what are the implications?

Edit* Any suggestions/edits on the docs are more than welcome =]

[lao9s]

@plusone-nick Technically, there should be no error in those functions from Kernel.

I think you had some errors elsewhere and thought this was the solution. If you now have Mixpost functional, try to return ":void" and see if everything is fine.