unable to access cloudron

[grimm1369]

You are seeing this page because the DNS record of 192.168.1.111 is set to this server's IP but Cloudron has no app configured for this domain.

[BrutalBirdie]

@grimm1369 The lack of information makes it impossible to help you out without guessing X times.

Please write a detailed description of your problem otherwise we can't narrow down what might be the problem.

[micmc]

@grimm1369 It seems you run cloudron on a local server, though cloudron runs on a domain name so you must set a local domain for your local IP 192.168.x.x

[girish]

@grimm1369 From your comment at https://forum.cloudron.io/topic/2633/self-host-install-issues/12, I can access my.twilightknights.org just fine here. Does it mean you got this sorted out?

[nappingtoomuch]

Sorry, to clarify the solution to this problem. I am having a similar issue on Linode. I set up Cloudron last night and was able to access. Today when I type the IP I get the message

"You are seeing this page because the DNS record of xxxxx is set to this server's IP but Cloudron has no app configured for this domain."

[girish]

@nappingtoomuch Once you have setup cloudron, you cannot access by IP. You can only access by my.domain.com.

The message is not great, I will fix it to say that you have to visit using the domain name and not by IP.

[grimm1369]

I tried the domain name the DNS is finding for the IP 192.168.1.110.

I get this message

Hmmm… can't reach this pageguac.twilightknights.org refused to connect.

I am port forwarding http and https.

[nebulon]

@grimm1369 I just have tried to get the A record for pageguac.twilightknights.org and it seems that does not exist at your used nameservers. Also the IP 192.168.1.110 is a local network IP, not the public IP. The DNS record need to have a publicly reachable IP.

[micmc]

@grimm1369 As I previously mentioned to you the IP address 192.168.1.110 is a LOCAL network IP address. Hence that means, and I assume you've installed CR on a local home server, this address is managed by your local network router and thus to reach it you MUST bind the domain name you want to use to this IP from your host file if for local access only. Otherwise, you will need to bind the domain name to the WAN IP address provided by your ISP, then through your router's administration reroute to your local IP 192.168.1.110.

[grimm1369]

@nebulon

I checked cloudflare

A

guac
(My Router Public IP)

DNS only

2 min
EditWhen toggled open, an additional table row will be added below this row to enable editing DNS records.
A
my
(My router public IP)

DNS only

2 min
EditWhen toggled open, an additional table row will be added below this row to enable editing DNS records.
A
twilightknights.org
(my router Public IP)

DNS only

Auto
EditWhen toggled open, an additional table row will be added below this row to enable editing DNS records.
TXT
cloudron._domainkey
"v=DKIM1; t=s; p=MIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQDrZjwMX7ytOLL6vW8khQa37OMH0id8TOpss1VqimBF/fxPqqWvaZD/r8Sa/0UUeao9o37+WHHzC6TPuGaE9w6j7VI5kOfd2uNudgJXSRNUmRcgXPY4kmmnXisCt6OBz8anOBNpS+xCOwkyDY8nBeB9MXNBFctsw9jxfn10Yn7KGQIDAQAB"
DNS only

2 min
EditWhen toggled open, an additional table row will be added below this row to enable editing DNS records.
TXT
_dmarc
"v=DMARC1; p=reject; pct=100"
DNS only

2 min
EditWhen toggled open, an additional table row will be added below this row to enable editing DNS records.
TXT
twilightknights.org
"v=spf1 a:my.twilightknights.org ~all"
DNS only

2 min
EditWhen toggled open, an additional table row will be added below this row to enable editing DNS records.

I am using Ubuntuu 20.04 running on Windows Hypervisor I have a home lab connected to my ATT provided router. I am port forwarding https and http to the Ubuntu server.

[nebulon]

ok, if you do not have a static IPv4 allocated by Att, then please look into https://docs.cloudron.io/networking/#dynamic-dns and use a domain backend which is programmable (anything besides wildcard and manual)

Once that is configured, you can sync dns and your issues should be solved.

Further please note the port limitations on such ISP connections https://docs.cloudron.io/email/#smtp-status nearly always is outbound port 25 blocked on such connections, so you most likely have to use some email relay.