After updating password no credentials needed to login

[BrutalBirdie]

@jdaviescoates

This is good info.
Just in case pinging @girish.

But I am also taking a look at this.

[BrutalBirdie]

@BrutalBirdie
Did you use single quotes ' or double quotes " or no quotes at all for the password?

[jdaviescoates]

I thought perhaps it was a length thing but howveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryodd works too, so doesn't look like it.

And just to double check that, in case that wasn't as long as the previous one this works fine too:

howveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryodd

So does sBd@ni7fjTo2J3KGRK

Hmz

[jdaviescoates]

@BrutalBirdie said in After updating password no credentials needed to login:

Did you use single quotes ' or double quotes " or no quotes at all for the password?

You mean in the /app/data/env.sh file?

I just edited what was there, i.e. no quotes at all:

#!/bin/bash

# https://listmonk.app/docs/configuration/#environment-variables
export LISTMONK_app__admin_username=admin
export LISTMONK_app__admin_password=howveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryoddhowveryodd

export TZ=Etc/UTC

# Do not change the values below
export LISTMONK_app__address="0.0.0.0:9000"
export LISTMONK_db__host="${CLOUDRON_POSTGRESQL_HOST}"
export LISTMONK_db__port="${CLOUDRON_POSTGRESQL_PORT}"
export LISTMONK_db__user="${CLOUDRON_POSTGRESQL_USERNAME}"
export LISTMONK_db__password="${CLOUDRON_POSTGRESQL_PASSWORD}"
export LISTMONK_db__database="${CLOUDRON_POSTGRESQL_DATABASE}"
export LISTMONK_db__ssl_mode="disable"

[BrutalBirdie]

@jdaviescoates
I think the problem might not be the length.

Try to use single quotes with the variable:

export LISTMONK_app__admin_password='sBd@ni7fjTo2J3KGRKprGm@YXPxXh7FkJzhatxGgvKJ69gAKA^gu4zfBMYjj*Gfk62nzW@M!W8VwB*epYDtPp%QApFVELKmtwkY63LJYVv@DAsMHwxucNHYFjRxT&'

There is a special char which breaks the bash with no quotes.
This should do the trick.

---

If you try the command in a bash shell without the single quotes you get this:

export LISTMONK_app__admin_password=sBd@ni7fjTo2J3KGRKprGm@YXPxXh7FkJzhatxGgvKJ69gAKA^gu4zfBMYjj*Gfk62nzW@M!W8VwB*epYDtPp%QApFVELKmtwkY63LJYVv@DAsMHwxucNHYFjRxT&
bash: !W8VwB: event not found

Which breaks the export statement and leaves the variable empty / not defined.
Which would explain why no password is needed, if none is set because of the bash error.

[jdaviescoates]

@BrutalBirdie yep, it's the &

Having an & at the end of the pw turns off auth.

Having an & somewhere in the middles seems to stop the app starting at all.

[BrutalBirdie]

@jdaviescoates it should work with single quotes tho even with the & char.

Good explanation here:
https://stackoverflow.com/questions/6697753/difference-between-single-and-double-quotes-in-bash

[jdaviescoates]

@BrutalBirdie said in After updating password no credentials needed to login:

@jdaviescoates it should work with single quotes tho even with the & char.

It doesn't. Adding single (or double) quotes makes no difference whatsoever in the testing I just did.

Hmz, scrap that. I think that was because I was simultaneously experiementing with quotes around admin too.

Wait, now I'm really confused.

Using this as a password works:

'apwwith&'

(hence why I crossed that bit out above)

But this still turns auth off completely:

'sBd@ni7fjTo2J3KGRKprGm@YXPxXh7FkJzhatxGgvKJ69gAKA^gu4zfBMYjj*Gfk62nzW@M!W8VwB*epYDtPp%QApFVELKmtwkY63LJYVv@DAsMHwxucNHYFjRxT&'

[BrutalBirdie]

@jdaviescoates
Then there is also a bug in the listmonk software itself.

You can try the referenced line of code in your shell and it should return the correct string.

export LISTMONK_app__admin_password='sBd@ni7fjTo2J3KGRKprGm@YXPxXh7FkJzhatxGgvKJ69gAKA^gu4zfBMYjj*Gfk62nzW@M!W8VwB*epYDtPp%QApFVELKmtwkY63LJYVv@DAsMHwxucNHYFjRxT&'

echo $LISTMONK_app__admin_password
sBd@ni7fjTo2J3KGRKprGm@YXPxXh7FkJzhatxGgvKJ69gAKA^gu4zfBMYjj*Gfk62nzW@M!W8VwB*epYDtPp%QApFVELKmtwkY63LJYVv@DAsMHwxucNHYFjRxT&

If the Bash does this correctly but the software has an issue, there might be a similar issue there.

[BrutalBirdie]

@jdaviescoates
So just to make it clear.
Single quotes work now, even with the & char?

[jdaviescoates]

@BrutalBirdie said in After updating password no credentials needed to login:

@jdaviescoates
So just to make it clear.
Single quotes work now, even with the & char?

Sometimes.

Using this as a password works:

'apwwith&'

But this still turns auth off completely:

'sBd@ni7fjTo2J3KGRKprGm@YXPxXh7FkJzhatxGgvKJ69gAKA^gu4zfBMYjj*Gfk62nzW@M!W8VwB*epYDtPp%QApFVELKmtwkY63LJYVv@DAsMHwxucNHYFjRxT&'

[BrutalBirdie]

@girish
Please don't JUST fix the issue, I have a trainee right now perfect task for him to start learning

I will not show him this conversation and will use this as a little benchmark for his skillset

[BrutalBirdie]

@jdaviescoates said in After updating password no credentials needed to login:

Sometimes.
Using this as a password works:
'apwwith&'
But this still turns auth off completely:
'sBd@ni7fjTo2J3KGRKprGm@YXPxXh7FkJzhatxGgvKJ69gAKA^gu4zfBMYjjGfk62nzW@M!W8VwBepYDtPp%QApFVELKmtwkY63LJYVv@DAsMHwxucNHYFjRxT&'

I will have to test this when I am at home.

[jdaviescoates]

@BrutalBirdie seems it has something to do with the % too (or perhaps that is the main culprit?)

Anyways, if I remove the % from:

sBd@ni7fjTo2J3KGRKprGm@YXPxXh7FkJzhatxGgvKJ69gAKA^gu4zfBMYjj*Gfk62nzW@M!W8VwB*epYDtPp%QApFVELKmtwkY63LJYVv@DAsMHwxucNHYFjRxT&

It works with single quotes (but not without).

But with the % included it breaks the auth even with the single quotes.

[jdaviescoates]

But then this pw works fine too:

apwwith%&

So perhaps it a combination of having % ending with & and length as well?

But it can't be that either because this also works fine:

apwwith%&apwwith%&apwwith%&apwwith%&apwwith%&apwwith%&apwwith%&apwwith%&apwwith%&apwwith%&apwwith%&apwwith%&apwwith%&apwwith%&apwwith%&

I've got to collect children from school now so will have to stop testing, hopefully @BrutalBirdie will be able to figure out what's going on!

[girish]

@jdaviescoates said in After updating password no credentials needed to login:

But this still turns auth off completely:
'sBd@ni7fjTo2J3KGRKprGm@YXPxXh7FkJzhatxGgvKJ69gAKA^gu4zfBMYjjGfk62nzW@M!W8VwBepYDtPp%QApFVELKmtwkY63LJYVv@DAsMHwxucNHYFjRxT&'

I can't reproduce this. This is what I have:

export LISTMONK_app__admin_username=admin
export LISTMONK_app__admin_password='sBd@ni7fjTo2J3KGRKprGm@YXPxXh7FkJzhatxGgvKJ69gAKA^gu4zfBMYjj*Gfk62nzW@M!W8VwB*epYDtPp%QApFVELKmtwkY63LJYVv@DAsMHwxucNHYFjRxT&'

[jdaviescoates]

@girish said in After updating password no credentials needed to login:

export LISTMONK_app__admin_username=admin
export LISTMONK_app__admin_password='sBd@ni7fjTo2J3KGRKprGm@YXPxXh7FkJzhatxGgvKJ69gAKA^gu4zfBMYjjGfk62nzW@M!W8VwBepYDtPp%QApFVELKmtwkY63LJYVv@DAsMHwxucNHYFjRxT&'

Odd. I can reproduce it over and over again.

Just did so again:

[humptydumpty]

@jdaviescoates I'm way off here but... my router's admin page auto logs me in at work if I'm signed in to my vault even though I have auto-fill disabled. Try logging in in a private window (or with all extensions disabled). It also happens to me on Costco dot com. Do you have the passwords saved in your vault?

Edit: I can't reproduce it either on a fresh install. I copied Girish's code like you did in your video. Works fine

Another thought, check Firefox's native password manager if it's still on and it's auto-filling the pass.

I can reproduce it if the code is like this:

export LISTMONK_app__admin_username=admin
export LISTMONK_app__admin_password=sBd@ni7fjTo2J3KGRKprGm@YXPxXh7FkJzhatxGgvKJ69gAKA^gu4zfBMYjj*Gfk62nzW@M!W8VwB*epYDtPp%QApFVELKmtwkY63LJYVv@DAsMHwxucNHYFjRxT&

Maybe it's a visual bug because of the double ' ' that gets auto-completed as you type ' in the web terminal at the end of the pass.

recording here: https://ufile.io/24rtfp8a (1MB).

[jdaviescoates]

@humptydumpty said in After updating password no credentials needed to login:

Try logging in in a private window (or with all extensions disabled).

Tried all that, and same in mobile browsers too.

[BrutalBirdie]

All I can say is that with single quotes all is working fine.
Tested and pushed by my trainee.