No sound in Jitsi...
-
@robi my issue is not solved; changing an ISP just to offer users to work as a guinea pig is nor easy for any complex setup, nor client-friendly.
In a way I understood, there is nothing to be done on the topic, so my best offer is to settle this as a know-issue, luckily happening not with everyone or not happening under Microsoft Hypervisor and that is has no know root cause and hence no resolution.
-
@potemkin_ai I hear you, and the frustration behind this, however you did manage to get sound working after fixing the port issue.
Hence the topic is marked solved.
The other issues you are having are not related to Cloudron or it's supported use. That part is up to you, right?
ISPs are highly complex stacks with many moving parts.
From the networking equipment, firewall rules and other protection and network address translation technologies, each is different.
Then comes the virtualization stack and configuration, and another layer of networking specific to that inner stack.
Then you get into the OS install and Cloudron managing itself.
I hope you can appreciate that this forum helped you solve a self caused user error.
I don't agree with your conclusions, hence I am replying here to help you see where to look, however my time is limited and free consulting has its limits.
Inconvenience or not, your unmentioned choice of ISP and many nested stack isn't working for you as you expect. Hence the suggestion to try another ISP, many of which offer free trials even.
-
@robi said in No sound in Jitsi...:
however you did manage to get sound working after fixing the port issue.
Hence the topic is marked solved.Not quite. I had two issues:
-1. Related to the port. Fixed. Indeed.
-2. Blinking issue with Jitsi not-working from time to time.Everything I say here is about second problem.
And yes, I'm aware how ISP works. I used to work for at telecom and other interesting places with a very extensive tech. stack.Hope that makes sense.
-
@nebulon I actually have set up several Cloudron instances and none of them is able to get Jitsi to work. I suppose that if I provide a fresh VM, it wont be able to get it working either. Therefore it might be suitable for debugging.
(I still want to mention at this point that its neither port related, nor a networking issue as I have a working Jitsi (from Yunohost) on one of my VMs)
What do you think?
-
@opensourced Can you tell us on which VPS provider you tried to setup Jitsi? We can then test them out there. Our cloudron/jitsi instances are hosted in DO and they work fine there atleast.
-
@girish We do have our own server farm in a data center. As host for our VMs, we use Proxmox.
-
@opensourced Think we found a few variables that we can set in Jitsi (that the package currently does not set). We will release a new package shortly with the changes.
-
The latest package now has a TCP harvester port defaulting to 4443. At least in my tests changing that or the UDP harvester port 10000 will result in no connectivity. Not sure how to fix this, but hopefully adding TCP improves the situation.
The NAT settings were unclear to me as what to set when using a docker bridge, so those are not part of this package release but hopefully we get down to what they should be set to for the next release then.
-
@nebulon said in No sound in Jitsi...:
The NAT settings were unclear to me as what to set when using a docker bridge, so those are not part of this package release but hopefully we get down to what they should be set to for the next release then.
At the bottom of the variables page @girish found, there's a link to a previous page -> docker guide that has NAT info and reverse proxy setup considerations.
-
@girish I'm glad to see your efforts put in this issue. I think we are getting closer! I looked at the sip-communicator config of yunohost - as their jitsi is working on my systems and they actually set those variables.
A further indication that this is the only missing piece is this thread here...
Are there environment variables for the local and the public IPs? I would like to test this.
-
@girish , I understand this topic is marked as solved and might fall out of sight - so I'm wondering if there are any updates on that?
-
@girish , I understand there are no updates?
-
P potemkin_ai referenced this topic on
-
P potemkin_ai referenced this topic on
-
@potemkin_ai No updates. We can't reproduce this and I am not sure what we can do to debug this further.
-
@girish right... but if felt like you found something to check (https://forum.cloudron.io/post/55044) - from what I understand, it won't hurt at least?
-
@girish is there any way I can add those variables persistently just on my instance, to verify if they solve the issue and to make sure it doesn't brake anything?
If that would work, I would revert back to you and you will only need to merge them into the source tree and everyone would be happy.
How does it sound?
I really hate having separate machine just for Jitsi.
-
Raising this up, in case it got lost.
-
@potemkin_ai We are still reworking the package (the package has fallen a bit behind since we couldn't figure how to update with ubuntu 22). Will pick this up next week.
