Disk usage is not showing

[necrevistonnezr]

It's the same (disk usage not showing) for me and you seem to be in a similar position - you're hosting Cloudron on your own hardware as do I.
Somehow that doesn't work in Cloudron.

The output of my df -h is:

Dateisystem                 Größe Benutzt Verf. Verw% Eingehängt auf
udev                         3,8G       0  3,8G    0% /dev
tmpfs                        765M    3,0M  762M    1% /run
/dev/mapper/beebox--vg-root  455G    367G   65G   86% /
tmpfs                        3,8G    8,0K  3,8G    1% /dev/shm
tmpfs                        5,0M       0  5,0M    0% /run/lock
tmpfs                        3,8G       0  3,8G    0% /sys/fs/cgroup
/dev/loop0                   9,2M    9,2M     0  100% /snap/canonical-livepatch/94
/dev/loop1                    56M     56M     0  100% /snap/core18/1885
/dev/loop2                    55M     55M     0  100% /snap/core18/1880
/dev/loop4                    97M     97M     0  100% /snap/core/9665
/dev/loop5                   9,2M    9,2M     0  100% /snap/canonical-livepatch/95
/dev/sdb1                    472M    146M  303M   33% /boot
/dev/sda1                    1,8T    1,6T  195G   89% /media/SG2TB
/dev/loop6                    97M     97M     0  100% /snap/core/9804

[girish]

@necrevistonnezr can you give output of df -T ? That outputs the disk type. Currently, we only scan ext4 disks for the graphs.

[roru2k20]

In the last days I had another problem with Cloudron.

Due to my energy strategy, my NAS was turned off during the night, which meant that Cloudron did not make its backups during the night on my NAS, but on the local hard drive until it recently overflowed. This in turn caused Cloudron not to start at all for the last few days.

After I fixed the memory shortage, Cloudron was also happy again and started up perfectly. But I never got a warning about the end of the space on a mount and I think that the missing display is the reason why I didn't get a warning.

@nebulon no this server run for months, but I haven't look at this view so often.

[roru2k20]

Here my browser console after I load this view

[girish]

@roru2k20 Can you provide your df -T output on your server as well? It doesn't look some browser related issue.

[roru2k20]

@girish here my df -T

Dateisystem            Typ       1K-Blöcke    Benutzt Verfügbar Verw% Eingehängt auf
udev                   devtmpfs    1983300          0   1983300    0% /dev
tmpfs                  tmpfs        402984       1640    401344    1% /run
/dev/sda1              ext4      114854020   20887388  88089284   20% /
tmpfs                  tmpfs       2014920          0   2014920    0% /dev/shm
tmpfs                  tmpfs          5120          0      5120    0% /run/lock
tmpfs                  tmpfs       2014920          0   2014920    0% /sys/fs/cgroup
overlay                overlay   114854020   20887388  88089284   20% /var/lib/docker/overlay2/3d984836c32bfff588e3797034c1662942f1504c981a7219253485e773190500/mergedoverlay                overlay   114854020   20887388  88089284   20% /var/lib/docker/overlay2/a4451de1f4ba54666842fafdfb4dc612ebd843bbea29e97f04ae85de3626b9cc/mergedoverlay                overlay   114854020   20887388  88089284   20% /var/lib/docker/overlay2/5f61f6157ad9e9ffeb8ffa7741aa592274ac1667da92303c4bd2234781252596/mergedoverlay                overlay   114854020   20887388  88089284   20% /var/lib/docker/overlay2/f0dc48a71e738483586bc733152fd3a800ab6ac5bdd620903ad2318038cd61d7/mergedoverlay                overlay   114854020   20887388  88089284   20% /var/lib/docker/overlay2/88ec3859290a3d91693a77a2f757689ba125747081a58a653eb04695f66a3ac0/mergedoverlay                overlay   114854020   20887388  88089284   20% /var/lib/docker/overlay2/a7d12cfb6b0d6e7b4271a13167291c6138ea92493e9aeadd1506783295968188/mergedoverlay                overlay   114854020   20887388  88089284   20% /var/lib/docker/overlay2/43606a48a6b8be1d399f29925c81eccb0a0c0a0a0afa534b18ee809209f8c285/mergedoverlay                overlay   114854020   20887388  88089284   20% /var/lib/docker/overlay2/ec79146bdd7d43b7d4de8d4558b64d413d3fae3f3a40863cb13ac1ddd195e3ac/mergedoverlay                overlay   114854020   20887388  88089284   20% /var/lib/docker/overlay2/2170c50636423238dbfd502e838fea9dcc6dbc864cd71b3a6302a788ecf2c35a/mergedoverlay                overlay   114854020   20887388  88089284   20% /var/lib/docker/overlay2/0d66eef326b45fb06d32fbfc5edbd190c89e8d475f823cb25b33a7024aa5de92/mergedshm                    tmpfs         65536          0     65536    0% /var/lib/docker/containers/a6454dae9b1c9085dce249f67adcd17e798c234c7d2a3aa396e1be94134058e7/mounts/shm
shm                    tmpfs         65536          0     65536    0% /var/lib/docker/containers/4b8fb396f5afc74cf0dfc6ee92c1c6203ac00d1a443f3ea7eb6839d5e593c449/mounts/shm
shm                    tmpfs         65536         12     65524    1% /var/lib/docker/containers/38b601166fba344596b2312be89148c768e3bb69c1aa9f01a7accb4a467f2266/mounts/shm
shm                    tmpfs         65536          0     65536    0% /var/lib/docker/containers/4bf379bf198f04e1305063715a455fa7e25276122d1046d450b78a698e435208/mounts/shm
shm                    tmpfs         65536          0     65536    0% /var/lib/docker/containers/fa5aa8b8c39e9948506c23999f831f788f7feccf64a8194ab3cfe1d34d768865/mounts/shm
shm                    tmpfs         65536          0     65536    0% /var/lib/docker/containers/3ebabbbffb3e128ac161b33131295a5d9371b90b2e9fca78bf28fae0e61101e6/mounts/shm
shm                    tmpfs         65536          0     65536    0% /var/lib/docker/containers/c52ac042656543ba662e459f8a92f5e6c550e71fdfd228454556ff8c1e876ae8/mounts/shm
shm                    tmpfs         65536          0     65536    0% /var/lib/docker/containers/7736581825a172c02b1aa6fdc36ccd4cd112d876057b204262bc9863a0793a6e/mounts/shm
shm                    tmpfs         65536          0     65536    0% /var/lib/docker/containers/86766194c255009c565ad04ba741de1f092fa8ea33b697cb7afa81d02afa56fb/mounts/shm
shm                    tmpfs         65536          0     65536    0% /var/lib/docker/containers/e51fa532b65c9ae1612037eff5eb90e49ac43f9bb56d815eeb4c1995dbb037b8/mounts/shm
overlay                overlay   114854020   20887388  88089284   20% /var/lib/docker/overlay2/65211ce91bf32a7a6189d901570503ecfc1fd86440337d0f90cbb9027041037d/mergedshm                    tmpfs         65536          0     65536    0% /var/lib/docker/containers/e464adf6b1854ca248664c47d0fe325bb46134a811908b998e3d7436906227a0/mounts/shm
//nas/backup/Nextcloud cifs     1918590988 1014708320 903882668   53% /backup
tmpfs                  tmpfs        402984          0    402984    0% /run/user/1000
overlay                overlay   114854020   20887388  88089284   20% /var/lib/docker/overlay2/ec5a9d177c0bb5c591f0e41609b3322a1623a3799be4233f13afef8a2eea08f7/mergedshm                    tmpfs         65536          0     65536    0% /var/lib/docker/containers/5829d1e2c33958043e735d4dbce7f0f1907e91dadbb38bf258cfcd6d55a0b182/mounts/shm
cto@nextcloud:~$

[necrevistonnezr]

Filesystem                  Type      Size  Used Avail Use% Mounted on
udev                        devtmpfs  3.8G     0  3.8G   0% /dev
tmpfs                       tmpfs     765M  2.9M  762M   1% /run
/dev/mapper/beebox--vg-root ext4      455G  367G   65G  86% /
tmpfs                       tmpfs     3.8G  8.0K  3.8G   1% /dev/shm
tmpfs                       tmpfs     5.0M     0  5.0M   0% /run/lock
tmpfs                       tmpfs     3.8G     0  3.8G   0% /sys/fs/cgroup
/dev/loop0                  squashfs  9.2M  9.2M     0 100% /snap/canonical-livepatch/94
/dev/loop1                  squashfs   56M   56M     0 100% /snap/core18/1885
/dev/loop2                  squashfs   55M   55M     0 100% /snap/core18/1880
/dev/loop4                  squashfs   97M   97M     0 100% /snap/core/9665
/dev/loop5                  squashfs  9.2M  9.2M     0 100% /snap/canonical-livepatch/95
/dev/sdb1                   ext2      472M  146M  303M  33% /boot
/dev/sda1                   ext4      1.8T  1.6T  195G  89% /media/SG2TB
/dev/loop6                  squashfs   97M   97M     0 100% /snap/core/9804

[roru2k20]

@girish said in Disk usage is not showing:

we only scan ext4 disks

I think that is the reason for both problem. I use a cifs Share and @necrevistonnezr use a ext2 Partition Format.

I try temporarily to unmount my backup drive and look into the view.

[roru2k20]

Short Test while I have umount my backup drive to look in my disk usage.
Unfortunately no change.

[necrevistonnezr]

@roru2k20 said in Disk usage is not showing:

@girish said in Disk usage is not showing:

we only scan ext4 disks

I think that is the reason for both problem. I use a cifs Share and @necrevistonnezr use a ext2 Partition Format.

I try temporarily to unmount my backup drive and look into the view.

But only /boot is formatted with ext2?! (and I don’t really know why...)

[lolliop]

I'm having a similar issue as well.
Edit: Please let me know if I need to open a new thread.
Edit2: Not a new system. It's been running for about a week.

Vultr, Ubuntu 20.04.1, Cloudron 5.6.3

System Info

Chrome - Console log

df -Th

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  1.9G     0  1.9G   0% /dev
tmpfs          tmpfs     394M  1.7M  392M   1% /run
/dev/vda1      ext4       76G   15G   57G  21% /
tmpfs          tmpfs     2.0G     0  2.0G   0% /dev/shm
tmpfs          tmpfs     5.0M     0  5.0M   0% /run/lock
tmpfs          tmpfs     2.0G     0  2.0G   0% /sys/fs/cgroup
tmpfs          tmpfs     394M   24K  394M   1% /run/user/125
overlay        overlay    76G   15G   57G  21% /var/lib/docker/overlay2/4aa0476d5e9f54a77fb245e7c391ce49bc6a80fc7120300cc8933261bd32878a/merged
overlay        overlay    76G   15G   57G  21% /var/lib/docker/overlay2/a6ea14043f42c07087d1f133d33d50e161cef9342b8360ed6601c3bdc292dfcb/merged
overlay        overlay    76G   15G   57G  21% /var/lib/docker/overlay2/1b24ff91fc4450d69d8419879fc46925d20327bfcafdb466e143752a7b5db1a1/merged
overlay        overlay    76G   15G   57G  21% /var/lib/docker/overlay2/60e4893426213b77982f2b47efca482389d720e7148ed9a4cb205348e8929ca6/merged
overlay        overlay    76G   15G   57G  21% /var/lib/docker/overlay2/69b4dd2921b7120b9d3b33089d9cbe945655bdddd61df8f5d06ece86c461350c/merged
overlay        overlay    76G   15G   57G  21% /var/lib/docker/overlay2/dea7c24f3096cb7737d60b10794ce8c2d3d4249f0c48707f54d6a3fa443508ee/merged
overlay        overlay    76G   15G   57G  21% /var/lib/docker/overlay2/c28552a10f0f0736d46f6be64046b05a5195fd16b9f844a9fd95316ecf3755e5/merged
overlay        overlay    76G   15G   57G  21% /var/lib/docker/overlay2/0d8cf0c75789aab0bfc2a2802995a65c06e7a0476ba4315ff73ece45d34e25e0/merged
tmpfs          tmpfs     394M     0  394M   0% /run/user/0

Cloudron system log

Dec 02 11:59:50 box:apphealthmonitor app health: 1 alive / 0 dead.
Dec 02 12:00:00 box:disks Checking disk space
Dec 02 12:00:00 box:janitor Cleaning up expired tokens
Dec 02 12:00:00 box:janitor Cleaned up 0 expired tokens.
Dec 02 12:00:00 box:tasks startTask - starting task 40. logs at /home/yellowtent/platformdata/logs/tasks/40.log
Dec 02 12:00:00 box:shell startTask spawn: /usr/bin/sudo -S -E /home/yellowtent/box/src/scripts/starttask.sh 40 /home/yellowtent/platformdata/logs/tasks/40.log 0 400
Dec 02 12:00:00 box:disks checkDiskSpace: disk space checked. ok: true
Dec 02 12:00:00 box:notifications alert: id=diskSpace title=Server is running out of disk space
Dec 02 12:00:00 box:apphealthmonitor app health: 1 alive / 0 dead.
Dec 02 12:00:00 box:shell startTask (stdout): Running as unit: box-task-40.service
Dec 02 12:00:01 box:shell startTask (stdout): Finished with result: success
Dec 02 12:00:01 box:shell startTask (stdout): Main processes terminated with: code=exited/status=0
Dec 02 12:00:01 box:shell startTask (stdout): Service runtime: 1.164s
Dec 02 12:00:01 box:shell startTask (stdout): Service box-task-40 finished with exit code 0
Dec 02 12:00:01 box:tasks startTask: 40 completed with code 0 and signal 0
Dec 02 12:00:01 box:tasks startTask: 40 done
Dec 02 12:00:10 box:apphealthmonitor app health: 1 alive / 0 dead.

[msbt]

@lolliop if you're actually on Ubuntu 20 - which is not supported just yet - that might be the reason

[mehdi]

@lolliop Yes, as @msbt just said, you should not be on Ubuntu 20.04. I'm surprised, how did you end up with cloudron on ubuntu 20 ?
Did you install it directly on 20.04, and the installer worked ? (It should not)
Or did you update the underlying Ubuntu while Cloudron was already installed ? (In that case, I am very surprised that this disk usage thing is the only thing that broke ^^)

[girish]

I suspect @lolliop did a dist upgrade to Ubuntu 20. This would have broken graphite/collected which is what we use for graphs since the collected/python3 plugins don't work on ubuntu 20 out of the box. See https://bugs.launchpad.net/ubuntu/+source/collectd/+bug/1872281 and https://bugs.archlinux.org/task/64533 . @lolliop can you confirm?

[lolliop]

Oh. My mistake then.

I thought Ubuntu 20.04 is already supported, because I checked the script, cloudron-setup, and it no longer prohibits me from installing on Ubuntu Fossa (It used to though).

I didn't do a dist upgrade. It was installed on a clean Ubuntu 20.04.1.

So far, everything else seems to be OK (touch wood). But then I'm just testing Open Project.

[girish]

@lolliop You can try this:

echo -e "\nLD_PRELOAD=/usr/lib/python3.8/config-3.8-x86_64-linux-gnu/libpython3.8.so" >> /etc/default/collectd

then systemctl restart collectd. And graphs might appear in some time.

As for Ubuntu 20.04 support, indeed we are just releasing Cloudron 6 which will support Focal. So, you caught us in between the release process.

[necrevistonnezr]

@necrevistonnezr said in Disk usage is not showing:

@roru2k20 said in Disk usage is not showing:

@girish said in Disk usage is not showing:

we only scan ext4 disks

I think that is the reason for both problem. I use a cifs Share and @necrevistonnezr use a ext2 Partition Format.

I try temporarily to unmount my backup drive and look into the view.

But only /boot is formatted with ext2?! (and I don’t really know why...)

Mine are still not showing under 18.04...

[lolliop]

@girish,

No dice. Rebooted and waited for like 3 hours.
I'll update if it changes later.

It's ok. I'll just wait for 6.0.
Thank you.

[girish]

@lolliop @necrevistonnezr I think I found the issue for Ubuntu 20 atleast. Can you please try https://git.cloudron.io/cloudron/box/-/commit/6810d823f542808860955196d959fadaba0a9ab8 ? The file is at /home/yellowtent/box/setup/start/collectd/df.py. After you make the change systemctl restart collectd. You can check the logs in /home/yellowtent/platfordata/logs/collectd/app.log.

[lolliop]

@girish,

Yay!!! It's working now.
But I think the logs are at /home/yellowtent/platfordata/logs/collectd/collectd.log.

Thank you!