What's coming in 6.0 (take 2)
-
@girish said in What's coming in 6.0 (take 2):
Ubuntu Focal 20.04 support
Just to check, but I assume Ubuntu 18.04 will continue to be supported by Cloudron until it's end of life (i.e. until April, 2023)?
@girish said in What's coming in 6.0 (take 2):
- Mail - Full text search via IMAP (solr integration)
Can't wait for this! I think this will mean I'll finally have the courage to ditch G Suite for my primary email!
But, I wonder, will it somehow enable (at least some) of the search operators available in Gmail?
From the little I've read, I get the impression solr can do this stuff, but I just wonder if there will be (or are?) any open source webmail clients that can actually take advantage of it once we've got it?
@jdaviescoates said in What's coming in 6.0 (take 2):
From the little I've read, I get the impression solr can do this stuff, but I just wonder if there will be (or are?) any open source webmail clients that can actually take advantage of it once we've got it?
Apparently, Roundcube should work (https://wiki.magenbrot.net/linux/mail/dovecot/volltextsuche_in_mails_mit_solr (German) and https://github.com/RainLoop/rainloop-webmail/issues/73#issuecomment-251093397).
Rainloop works with SOLR and dovecot (which I think Cloudron uses) if you create a virtual mail folder with all mail: https://github.com/RainLoop/rainloop-webmail/issues/73#issuecomment-412377275
Since the otherwise excellent Rainloop doesn't even support search in multiple folders, this would be a great improvement! I hope wish that @girish and @nebulon would / could preconfigure dovecot accordingly...
-
@jdaviescoates said in What's coming in 6.0 (take 2):
From the little I've read, I get the impression solr can do this stuff, but I just wonder if there will be (or are?) any open source webmail clients that can actually take advantage of it once we've got it?
Apparently, Roundcube should work (https://wiki.magenbrot.net/linux/mail/dovecot/volltextsuche_in_mails_mit_solr (German) and https://github.com/RainLoop/rainloop-webmail/issues/73#issuecomment-251093397).
Rainloop works with SOLR and dovecot (which I think Cloudron uses) if you create a virtual mail folder with all mail: https://github.com/RainLoop/rainloop-webmail/issues/73#issuecomment-412377275
Since the otherwise excellent Rainloop doesn't even support search in multiple folders, this would be a great improvement! I hope wish that @girish and @nebulon would / could preconfigure dovecot accordingly...
@necrevistonnezr thanks, that all sounds positive, but I don't see anything there about which search operators will work. Guess maybe I'll just have to wait and see!
-
Some big news: We will be adding i18n support in Cloudron 6. This work is being sponsored by Medias-Cite and their Cloudron project OSINUM. Thanks @Benoit ! As part of the work, we will also package the Weblate app (for translations).
-
Some big news: We will be adding i18n support in Cloudron 6. This work is being sponsored by Medias-Cite and their Cloudron project OSINUM. Thanks @Benoit ! As part of the work, we will also package the Weblate app (for translations).
-
Some big news: We will be adding i18n support in Cloudron 6. This work is being sponsored by Medias-Cite and their Cloudron project OSINUM. Thanks @Benoit ! As part of the work, we will also package the Weblate app (for translations).
-
Some big news: We will be adding i18n support in Cloudron 6. This work is being sponsored by Medias-Cite and their Cloudron project OSINUM. Thanks @Benoit ! As part of the work, we will also package the Weblate app (for translations).
-
We got some inquiries about what languages we will support. Currently, it's early days and we are just deciding on how to go about internationalization. Usually, translating an app is 2 steps. Step 1 is i18 phase where the app is made translation friendly. Step 2 is the l10n phase where localizations are provided.
At this point, all we know is that we will atleast launch with french and german translations.
-
We got some inquiries about what languages we will support. Currently, it's early days and we are just deciding on how to go about internationalization. Usually, translating an app is 2 steps. Step 1 is i18 phase where the app is made translation friendly. Step 2 is the l10n phase where localizations are provided.
At this point, all we know is that we will atleast launch with french and german translations.
-
Some updates on volume management. There is now a volume view.
You add a host path as a volume and give it a name. This is most likely some EBS/external hard disk/Block Storage. There is also the file manager integration (the button next to the delete button).
You can then go to the app view and mount these volumes into the apps. There is a new Storage section.
There is a section overload in the app configure view
We are looking to reducing the list of sections in the left pane. It's making things hard to find. -
This looks wonderful!
Off the top of my head, I could see the Console + Repair sections being merged and the Resources + Access Control + Location sections being merged. But honestly I am struggling to come up with names so I suppose thats why you have them the way you have them now.
-
Some updates on volume management. There is now a volume view.
You add a host path as a volume and give it a name. This is most likely some EBS/external hard disk/Block Storage. There is also the file manager integration (the button next to the delete button).
You can then go to the app view and mount these volumes into the apps. There is a new Storage section.
There is a section overload in the app configure view
We are looking to reducing the list of sections in the left pane. It's making things hard to find.@girish Amazing!
It's almost like you develop with the power of telepathy sometimes
-
Some updates on volume management. There is now a volume view.
You add a host path as a volume and give it a name. This is most likely some EBS/external hard disk/Block Storage. There is also the file manager integration (the button next to the delete button).
You can then go to the app view and mount these volumes into the apps. There is a new Storage section.
There is a section overload in the app configure view
We are looking to reducing the list of sections in the left pane. It's making things hard to find.@girish Any chance of you adding a button in for resizing the partition after upgrading a VM?
Web Design https://www.evergreen.je
Development https://brandlight.org
Life https://marcusquinn.com -
@girish Any chance of you adding a button in for resizing the partition after upgrading a VM?
-
@girish Any chance of you adding a button in for resizing the partition after upgrading a VM?
@marcusquinn said in What's coming in 6.0 (take 2):
@girish Any chance of you adding a button in for resizing the partition after upgrading a VM?
+1
Resizing my backup volume on Hetzner is one of the few reasons I have to occasionally ssh into my VPS.
-
@robi
s3 filesystem are not so mature, i read a lot on them because use s3 with dovecot in our mail server and the performance are terrible in u use s3 as FS, 20/40 ms depending on where you host the s3 server.The optimal solution is to use plugin or software that integrate s3 in to the App/script that you want to use.
Matteo. R.
Founder and Tech-Support Manager.
MooCloud MSP
Swiss Managed Service Provider
