What's coming in 7.4
-
@fbartels it should actually also be served up by the my. domain. I wasn't quite sure what the most compatible way is.
-
Danish / German translations are done
-
One thing i have noticed since upgrading to 7.4 is that my backups now are failling:
Error uploading snapshot/app_0a8cabb4-9f38-4826-b1ff-0bd5cff5ff5b.tar.gz.enc. Message: We encountered an internal error, please try again.: cause(stat /data/bucket-name: host is down) HTTP Code: InternalError
My backup goes to a minio instance with a hetzner storage space mounted. The path looks like it's coming from the minio host. No changes have been done on the minio end, but I have also not yet checked it's logs. The cloudron backup list only contains one backup tagged with 7.4.0 and the error is the same for the automated and manually triggered backups.
Currently on mobile will need to check logs when at my desk later.
-
One thing i have noticed since upgrading to 7.4 is that my backups now are failling:
Error uploading snapshot/app_0a8cabb4-9f38-4826-b1ff-0bd5cff5ff5b.tar.gz.enc. Message: We encountered an internal error, please try again.: cause(stat /data/bucket-name: host is down) HTTP Code: InternalError
My backup goes to a minio instance with a hetzner storage space mounted. The path looks like it's coming from the minio host. No changes have been done on the minio end, but I have also not yet checked it's logs. The cloudron backup list only contains one backup tagged with 7.4.0 and the error is the same for the automated and manually triggered backups.
Currently on mobile will need to check logs when at my desk later.
-
One thing i have noticed since upgrading to 7.4 is that my backups now are failling:
Error uploading snapshot/app_0a8cabb4-9f38-4826-b1ff-0bd5cff5ff5b.tar.gz.enc. Message: We encountered an internal error, please try again.: cause(stat /data/bucket-name: host is down) HTTP Code: InternalError
My backup goes to a minio instance with a hetzner storage space mounted. The path looks like it's coming from the minio host. No changes have been done on the minio end, but I have also not yet checked it's logs. The cloudron backup list only contains one backup tagged with 7.4.0 and the error is the same for the automated and manually triggered backups.
Currently on mobile will need to check logs when at my desk later.
@fbartels said in What's coming in 7.4:
One thing i have noticed since upgrading to 7.4 is that my backups now are failling:
.
···
Error uploading snapshot/app_0a8cabb4-9f38-4826-b1ff-0bd5cff5ff5b.tar.gz.enc. Message: We encountered an internal error, please try again.: cause(stat /data/bucket-name: host is down) HTTP Code: InternalError
···My backup goes to a minio instance with a hetzner storage space mounted. The path looks like it's coming from the minio host. No changes have been done on the minio end, but I have also not yet checked it's logs. The cloudron backup list only contains one backup tagged with 7.4.0 and the error is the same for the automated and manually triggered backups.
Currently on mobile will need to check logs when at my desk later.
Thanks to the brave soul @fbartels for trying the update to 7.4 and letting us know how it went. Encouraged, I did the same and it has gone very smoothly. The backup takes quite a while, but it all seems to be going well now.
Well done, Cloudron team!
I am curious why Cloudron use a Kanban instead of a Gantt for tracking progress.
-
@fbartels we haven't really made any changes around backups for 7.4. Let us know what you find but this seems like some error coming from the server.
@girish said in What's coming in 7.4:
Let us know what you find but this seems like some error coming from the server.
This indeed turned out to be an issue on the minio side (backup is still running but I expect it will finish this time). The smb mount died on the minio host, so after remounting minio was operational again.
-
The night after my server auto-updated to 7.4, I got an error notification regarding email config that has no more info when clicked on it. It happened only once so far but just wanted to mention it. Other than that, 7.4 seems to be working fine for me.
Email is not configured properly
-
The night after my server auto-updated to 7.4, I got an error notification regarding email config that has no more info when clicked on it. It happened only once so far but just wanted to mention it. Other than that, 7.4 seems to be working fine for me.
Email is not configured properly
@humptydumpty the initial regression thread is at https://forum.cloudron.io/topic/8913/email-is-not-configured-properly-since-update-to-cloudron-7-4-0/2
-
With Auto updates on, I was force updated to 7.4.0
Can you please disable that functionality?
Unstable updates should not occur without manual involvement.
I should not have to choose between installing an unstable update or manually update all my cloudron apps, that list is quite high at this point.
-
With Auto updates on, I was force updated to 7.4.0
Can you please disable that functionality?
Unstable updates should not occur without manual involvement.
I should not have to choose between installing an unstable update or manually update all my cloudron apps, that list is quite high at this point.
@privsec said in What's coming in 7.4:
With Auto updates on, I was force updated to 7.4.0
Can you please disable that functionality?
Unstable updates should not occur without manual involvement.
I should not have to choose between installing an unstable update or manually update all my cloudron apps, that list is quite high at this point.
On a similar note, after the update, VaultWarden showed a pre-release update was available for installation. I think I am going to have that green up-arrow there till a stable release happens.
Perhaps we could have a two tone up arrow system, where neon green was for unstable releases and green for ordinary releases. We could toggle notifications for a permutation of these.
-
@privsec said in What's coming in 7.4:
With Auto updates on, I was force updated to 7.4.0
Can you please disable that functionality?
Unstable updates should not occur without manual involvement.
I should not have to choose between installing an unstable update or manually update all my cloudron apps, that list is quite high at this point.
On a similar note, after the update, VaultWarden showed a pre-release update was available for installation. I think I am going to have that green up-arrow there till a stable release happens.
Perhaps we could have a two tone up arrow system, where neon green was for unstable releases and green for ordinary releases. We could toggle notifications for a permutation of these.
@LoudLemur Yes, for vaultwarden, there seems to be some issue which is causing MySQL to crash. So, we have pushed a pre-release for those who are willing to test it. See https://forum.cloudron.io/topic/8895/mysql-not-responding-with-vaultwarden-installed
-
With Auto updates on, I was force updated to 7.4.0
Can you please disable that functionality?
Unstable updates should not occur without manual involvement.
I should not have to choose between installing an unstable update or manually update all my cloudron apps, that list is quite high at this point.
-
@LoudLemur Yes, for vaultwarden, there seems to be some issue which is causing MySQL to crash. So, we have pushed a pre-release for those who are willing to test it. See https://forum.cloudron.io/topic/8895/mysql-not-responding-with-vaultwarden-installed
-
It seems that the time display was changed in Backups & Email Log. Screenshots below. Can we please have this either be 24 hour time again or else at least add AM/PM if meant to be 12-hour format? It's confusing at a glance since it's missing AM/PM tags it is presumed to be 24-hour but that's incorrect.
-
It seems that the time display was changed in Backups & Email Log. Screenshots below. Can we please have this either be 24 hour time again or else at least add AM/PM if meant to be 12-hour format? It's confusing at a glance since it's missing AM/PM tags it is presumed to be 24-hour but that's incorrect.
-
-
Much smaller release given the vacation time and I think we want to make more releases often. The previous one took forever!
- Update base image for apps and addons to Ubuntu 22. This is already under way - https://forum.cloudron.io/topic/8130/docker-base-image-4-0
- (mail) Virtual all directory in dovecot for search
- (mail) Investigate why Spam learning/filtering sometimes does not work effectively.
- Backup integrity - store size and checksum of backups. Also provide a way to "verify" backup integrity in the remote.
- Backup/restore progress
- OpenVPN/Wireguard integration
- DoT support with client ID
- Community repo (appstore)
- Add optional flag for turn addon.
@girish said in What's coming in 7.4:
(mail) Virtual all directory in dovecot for search
Did this make it into 7.4? If so, how do we take advantage of it?
And as @artd2019 just asked, can we us use Solr in SnappyMail? (and what about the SnappyMail Nextcloud app too?)
-
@necrevistonnezr said in What's coming in 7.4:
@d19dotca see https://forum.cloudron.io/topic/8967/time-in-logs-in-12h-format-now-since-update-to-7-4/
Funny I had thought I saw a post but couldn’t find it earlier before I made that comment. Thanks for linking it, that’s the one I was looking for earlier.
Yes it seems this was fixed with 7.4.1 thankfully.
-
@necrevistonnezr said in What's coming in 7.4:
@d19dotca see https://forum.cloudron.io/topic/8967/time-in-logs-in-12h-format-now-since-update-to-7-4/
Funny I had thought I saw a post but couldn’t find it earlier before I made that comment. Thanks for linking it, that’s the one I was looking for earlier.
Yes it seems this was fixed with 7.4.1 thankfully.
-
Much smaller release given the vacation time and I think we want to make more releases often. The previous one took forever!
- Update base image for apps and addons to Ubuntu 22. This is already under way - https://forum.cloudron.io/topic/8130/docker-base-image-4-0
- (mail) Virtual all directory in dovecot for search
- (mail) Investigate why Spam learning/filtering sometimes does not work effectively.
- Backup integrity - store size and checksum of backups. Also provide a way to "verify" backup integrity in the remote.
- Backup/restore progress
- OpenVPN/Wireguard integration
- DoT support with client ID
- Community repo (appstore)
- Add optional flag for turn addon.
@girish said in What's coming in 7.4:
OpenVPN/Wireguard integration
Can someone give some detail about what this integration will mean? E.g. if OVPN/WG integration is used, that means access to services will only be available via it?
Or something else?