Cloudron on a Raspberry pi?

[will]

@malvim How about I ship you mine?

[malvim]

Yeah, it seems mysql-server-5.7 is not available (though there's a later version that is), and I wasn't able to get past installing linux-generic as well, since it seems kernel patching is not exactly the same under arm...

Also, I saw the script downloads a specific version of nginx, which is amd64 as well. I'll keep trying, but I've been having network problems which I think have to do with the provider I chose. I'll get back when I have more news.

[malvim]

@will Man, I'd REALLY love to, but my guess is we don't live in the same country heheh... I'm from Brazil!

If you can get it on a network with an ubuntu 20.04 version, maybe I can access it via ssh and fiddle for a bit?

[will]

@malvim Yeah man, PM me what you want on it, and I'll reimage it soonest and beam over creds.

[girish]

@malvim Yeah, you can adjust that apt line as needed. Essentially, you have to make the https://git.cloudron.io/cloudron/box/-/blob/master/baseimage/initializeBaseUbuntuImage.sh script succeed. You can make the script standalone, it does not require any args.

nginx ARM packages - http://nginx.org/packages/ubuntu/pool/nginx/n/nginx/

Node ARM packages - https://nodejs.org/dist/v10.18.1/

Docker ARM packages - https://download.docker.com/linux/ubuntu/dists/bionic/pool/stable/

Also, I saw you are testing in Focal. One issue I hit (even on x86) was that collectd has issues with the python3 plugin. I haven't gotten around to fix that.

[malvim]

@girish Yeah, I'll try bionic again, it just crashed on something related to initramfs-tools, and focal still does when i try to install linux-generic, which I assume has something to do with kernel images and the like? This stuff is a bit above my current knowledge, so I'm not exactly sure what I'm doing heheh.

[girish]

@malvim Cloudron doesn't really use any of the packages like linux-kernel, initramfs etc directly. I think it's just added there for completeness. Feel free to remove them.

[malvim]

@girish great! I was already commenting out these lines to see where it went.

So it seems I'm losing name resolution after installing unbound. Installation of resolvconf is not a problem, but as soon as I install unbound, lots of names stop resolving and I can't install anything anymore.

Not sure how unbound works, might have to go into it a bit more, but my guess is maybe the problem is inside my provider. I'll check with @will later to see if we can try it in his device, and see if the problem persists.

[malvim]

Just to keep you guys updated on what's going on: I commented out unbound just to go through (and probably have to come back to it later, but still).

I also switched to installing nginx from the repos instead of downloading a specific package with curl manually, as their version is arm64 and it seems the rpi I'm on is armhf, which I know nothing about but some nginx-arm64 dependencies were not being met.

I switched node to the armv7l package and it went ok.

I switched docker packages to armhf, they intalled okay, but it seems I don't have the overlay kernel module loaded and have NO IDEA how to load it heheh. A few google searches still got me kinda stuck, I'll try again tomorrow.

[malvim]

Alright, so I learned how to load kernel modules, and the problem now is that the / partition in this particular provider is over nfs, and overlay is not supported.

So, as this is not a problem with cloudron on a rasberry pi, and is particular to this provider, I'm thinking of trying to change the docker driver tomorrow, just to see how far I can get to...

[malvim]

Hey, yall.

So my Raspberry Pi finally arrived, and I could start testing cloudron on it without the hassles I was having with the hosting company. So here are some thoughts and the current bump on the road I'm trying to overcome:

• I was able to install cloudron pretty easily with just a few changes to the cloudron-setup script itself, and to initBaseImage.sh and installer.sh inside the cloudron package that is downloaded from the internet by cloudron-setup
• The changes in cloudron-setup were just not upgrading the kernel (not installing linux-generic, like I talked to @girish about earlier in this thread), and not downloading the cloudron package from the website, instead using my modified version so I coud change things and test.
• The changes inside the package were pretty much just changing amd64/x64 strings to arm64 in all the downloaded packages
• Another important change is the boot part, where cloudron changes grub files, and I had to switch things to the /boot/firmware files
• I was able to keep unbound untouched, I guess it was a problem with the hosting company

So that was what I had to do, and here are the things I'm currently thinking about this:

• It would be good to have the current architecture in a variable, say arch, but there's a few questions to answer, like:
  • The rpi I was using in the hosting company was not arm64 architecture, but armhf, I think. If there's different architectures for different models, we'd have to test it on others. I currently own an arm64 rpi 4 model B.
  • Some downloaded packages use x64 instead of amd64 in their names, and stuff like armv7l for armhf architecture, it seems. We'd have to map these package names to their architectures in a more explicit way, I think.
• We'd have to extract the boot configuration (grub vs /boot/firmware confs) somewhere

I'm now facing ANOTHER problem, which is: it seems my ISP doesn't allow me to forward low ports like 80 and 443, so I can't really host cloudron from inside my home at the moment. I'm starting another thread asking for ideas with that, but I can't test cloudron apart from the installation process (which went smoothly all the way to the domain setup, but then I can't access it because of port forwarding restrictions).

So there it is, this is were I'm at currently regarding installing cloudron on an rpi, I'd greatly appreciate any input, thoughts, ideas, whatever you guys have.

Cheers!

[girish]

That's fantastic news I replied here about the port forwarding - https://forum.cloudron.io/topic/3324/testing-from-home-without-nat-port-forwarding-capability

[yusf]

Stellar effort getting this far, @malvim! It’s sounds quite promising.

[robi]

@malvim arm64 is only available on the rPi 4 as far as I recall.
armhf is for the previous models as they are 32bit ARM chips.

It would be cool if both were supported and autodetected, but you should be aware of the arch differences between the different models.

[malvim]

@robi Yeah, I don't know much about the different architectures, and at present I don't have access to any earlier armhf model, so I'll keep pushing with what I have for now. Maybe if we can suport the arm64 rPi 4 to start, some modifications (like explicitly handling architecture information, different boot locations and whatnot) will help us deliver cloudron to other models more easily.

[malvim]

Just keeping everything relating to the rpi setup in this thread:

So I finished setting up, went to https://<ip> like cloudron-setup says, and started domain setup. As per the other thread, I set up my IP to the interface I'm using (wlan0). I'm using Amazon AWS as a domain provider, and set up the keys and such.

So cloudron was able to create the DNS records (using a subdomain, like pi.mydomain.com, which should - and does - create an A record my.pi.mydomain.com pointing to my 192.168 internal IP).

Afterwards, though, cloudron is never able to check for the records, as I cannot seem to resolve the my.pi domain from inside the pi.

Other stuff that happens:

• sudo always says sudo: unable to resolve host ubuntu, even though it does change user to root no problem; ubuntu is the default hostname on a bare ubuntu 18.04 install on the pi;
• I can dig other domains that are already hosted on my zone, and get corret responses. dig- ing for the my.pi domain either times out with a "no server could be reached" message, or, when I do it RIGHT AFTER a successful dig to other domain, returns an "empty" response (with a line indicating 0 answers, like this: ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 1)

I'm a bit over my skill level on this, so if anyone could chime in, id'd be greatly appreciated. Either with an idea on what might be going on, or maybe something I could do/check/run to get mor info on what might be going on.

Thanks!

[nebulon]

@malvim said in Cloudron on a Raspberry pi?:

sudo: unable to resolve host ubuntu

This is expected and has nothing to do with arm. To get over that you have to setup the hostname correctly. In your case the hostname is still set to the default ubuntu whereas following your example it has to be my.pi.mydomain.com

[malvim]

@nebulon huh, that makes sense, but I thought this was supposed to be done by cloudron during setup? I don’t remember having to manually set the hostname in any other cloudron setup before, but I might just have forgotten...

[girish]

It looks like the blocking issue is the DNS does not work? Does host my.pi.mydomain.com and host my.pi.mydomain.com 127.0.0.1 work on the pi?

[jamesgallagher]

If there's nothing private in it; could you post your /etc/hosts file?