Object Storage or Block Storage for backups of growing 60+ GB?
-
@d19dotca Assuming Object Storage is the same as S3 or Minio, I would go with Block Storage because I don't always rely solely on the software to manage my backups. Oft-times I want to retrieve a specific file from a backup - combing through that deep and convoluted Object Storage folder hierarchy is insanity-inducing! Also, sometimes a Restore process fails (a Backup one, too) due to one file name's odd character - good luck finding it in that same hierac-hell.
That said, I do use OB for all my major backups. But I also use BS for other more crucial, short-term, files-still-needed backups.
-
One thing to consider is that Block Storage is usually with the same provider (atleast, for "speed"). It's best to have your VPS and backups in separate providers to prevent getting locked out.
Also, my understanding is that most of Block Storage are not RAID and there is no protection against bitrot or redundancy. Object Storage is usually implemented using 'pooled storage' and tends to have redundancy/checksums etc.
-
@girish
Every storage in a datacenter is manage with some sort of raid/redundancy.Or you will have too much downtime, due to normal drive failure.
The it depends if they have zfs or a filesystem that have checks and improvements for bitrot preventions.
-
@MooCloud_Matt I see. Info on Block Storage is generally hard to come by.
But for example https://digitalocean.github.io/navigators-guide/book/03-backup/ch07-storage-on-digitalocean.html (I don't know if this is some authoritative documents), it says for Block Storage "Data spans multiple nodes. File systems could experience corruption." It does also say "The Volume storage cluster is a distributed system that has multiple copies of your data within the cluster" . Not sure what all this translates to
Does this mean it will protect me against bitrot? -
@d19dotca
My advice is not not use block storage because if some one get in to your Cloudron they get in to your backup too.Set up S3 + your own lifetime policy, and not using incremental backups.
And obviously not allowing the key in Cloudron to delete any thing. -
@girish
Do is really bad in explain what they use, even if you contact them.But mostly likely is just to cover there ass, if you have a distribute system (especially if you use block storage and not file storage) you have parity check in the block of data.
Ceph is the most use currently (if someone can check that, maybe something new is been use) in big Clusters, do all of that as a default.
-
Having worked in the storage industry, there are many insights one gets from years of experience that you cannot get anywhere else.
The little known thing is that stupidity and ignorance always comes first.
Here's the perfect example:
All history of storage has a legacy that started with blocks on spinning disks. Taking this forward in time, all protocols, drivers and interfaces have been written to support block storage. Along comes solid state, and now all the slow block ways of doing things are just put on top of flash storage. Convenient right?Stupid? You bet.
Now we have speed and volume of data in tsunamis greater than what disks can handle, and along comes object storage, which can do all that and handle sizes greater than terabytes, but petabytes (PB), exabytes (EB) and beyond!
What does the industry do first? They use block storage protocols and write directly to object stores. Convenient right?
Stupid? You bet.
And slow too. Not because object storage is slow, but because using block storage concepts on object stores makes them slow.
It's like putting diesel fuel in your gasoline car. It doesn't match and won't work very well, and may even destroy it.
That is exactly what happens when block storage concepts, with small random writes are used to dump data to a nice object store, who's architecture is optimized for large sequential transactions, for which it's brilliant at, especially at scale. It slow everything down and trashes the system, further causing problems.
Only in the last several years have a few smart folks begun to recognize this difference and write object storage connectors (and even start companies) that are actually tuned and understand what an object store does and use it properly.
Those are how the likes of Apple, Disney and other huge companies with enormous media assets are able to store all the apps, movies and data globally, so things just work when you click "play".
-
Thanks guys! As much as I hate the 1.5 hour backup time (and it'll grow longer as more data is collected), I think it's the safer bet to just do it at like 4 AM or something each day, the storage then is out of the Datacentre and will be safer that way.
Do you guys use rsync or tgz for the object storage backups, do you see any performance improvement using one over the other? I normally used rsync when using block storage as that was usually the quickest, but I'm guessing that's not the case with Object Storage, eh?
-
@d19dotca depends on what kind of data you have. 99% of my backup contains small files below 1mb, no audio/video or big files.
With tgz you get compression especially for data like documents/mails, no problems with naming or deep folder structures and the benefit that you transfer one big file (archive) instead of sometimes a 6 digit number of small files. It takes way longer for RSYNC to check all these files then just to pack and transfer them.
If you have lots of big files that don't compress well, tgz isn't much of a help and transfering them would be waaaaay slower in comparison to RSYNC that just needs to compare source and target.
I use Netcup and Hetzner root server and a 5TB Hetzner Storage Box for tgz backups that does daily snapshots (limited to 3) in addition. For my Hetzner servers I have a storage VPS with Minio at AlphaVPS.
While having your backup storage at the same provider has speed benefits, it is bad practice and destroys what you actually want to achieve with a backup in the first place.
-
@subven Okay I ran some tests. If using tgz it was about 1.5 hour upload. If I used rsync, the first one was about an hour (I think it was 55 minutes), but the second and third one so far have been in the area of 22 minutes, so much quicker. I guess the downside is this takes up more storage than tgz would have but that's okay I guess since Wasabi takes the full 5.99 USD for 1 TB regardless of how much is stored under 1 TB. I guess I'll continue to use Wasabi via Cloudron's rsync type for now.
-
@d19dotca said in Object Storage or Block Storage for backups of growing 60+ GB?:
more storage
Depends if you store backup for 2 days or for 1 year.
Rsync is an incremental backup, you will never store the same file 2 times.
But is disadvantage is that I'd you even get 1 corrupted snapshot you will lose everything after that. -
@MooCloud_Matt Would you suggest Backblaze over Wasabi in that case? Backblaze charges on command types too so I assumed I’d be better with Wasabi but point taken as their 3-month lifespan requirement struck me as very strange. Went with Wasabi still as it seemed unlikely I’d hit the 1TB limit even with deleted files, plus it has a Canadian Datacentre which will be more performant latency-wise then Backblaze’s California Datacentre when my VPS is hosted in Toronto, Canada.
-
-
@robi said in Object Storage or Block Storage for backups of growing 60+ GB?:
@LoudLemur Seems to be half that price on Contabo.
I was surprised as the Vultr Object Storage is nvme, but the block storage can be HDD, so I thought the block storage would be cheaper.
What is the best toolto browse through block storage files to find one you want?
-
@LoudLemur Yeah I used Vultr for a little bit when testing but their Datacentre location for their object storage was far away from my VPS Datacentre in Vultr, and it's not too cheap at least compared to what sort of storage you get with Wasabi or Backblaze for example. Not too bad though, for sure, and worth consideration for some.
-
@d19dotca said in Object Storage or Block Storage for backups of growing 60+ GB?:
@LoudLemur Yeah I used Vultr for a little bit when testing but their Datacentre location for their object storage was far away from my VPS Datacentre in Vultr, and it's not too cheap at least compared to what sort of storage you get with Wasabi or Backblaze for example. Not too bad though, for sure, and worth consideration for some.
-
@d19dotca
You must understand what is more valuable for you: speed, reliability, or price.
reliability mostly Backblaze’s services are one of the best.
Speed, Wasabi is good enough if is near to your data center, but the is no duplication of data, and is something that we have to use more than want I like to admit.
