Email sending broken after updating to 8.2.x (due to IPv6 issues)

[privsec]

OK, sorry I am off and on. I do not do this as a full time job. I need this resolved but im lost as to what to do.

At this point, I just want to future proof myself from IPV6. How do I permanently disable and remove this functionality on my VPS from Netcup.

[girish]

@Gengar I signed up but it is stuck in "Order Pending"

[Gengar]

@privsec Are you also having the issue of PTR6 value turning to "null" ?

@privsec why would you turn off IPv6 completly ? You can do it but why ? I understood that emails servers from Google and Microsoft are now using full IPv6 resolution and if they receive an email coming from an IPv4 mail server they may or will consider it as spam more easily...

But regarding your question @privsec , how to disable IPv6 completly, I think I would do it on the OS level because I've seen that IPv6 is not enabled inside the docker containers.

First I would start to disable it temporarily using this command as I did in my tests before :
sudo sysctl -w net.ipv6.conf.all.disable_ipv6=1

It will disable ipv6 until next reboot.

And if it works like that for you, then you can reboot your server and try to disable it permanently by creating a new file : sudo nano /etc/sysctl.d/10-disable-ipv6.conf

And you write this in this file :

net.ipv6.conf.all.disable_ipv6 = 1
net.ipv6.conf.default.disable_ipv6 = 1

to save your file and quit nano
CTRL+0 - ENTER - CTRL+X

And then apply this new config file by doing :
sudo sysctl --system

And IPv6 should be disabled completly at the OS level. Reboot your server.

[girish]

I spun the infomaniak postings to a separate thread - https://forum.cloudron.io/topic/13566/infomaniak-ipv6-issues

[privsec]

My IPV6 in the dashboard is reporting working just fine.

Emails are not sending to gmail emails and I need this resolved.

[privsec]

Who can I pay to solve this for me?

[scooke]

@privsec A new vps provider. Choose one which others use with no problems.

[jdaviescoates]

@privsec @avatar1024 had this issue and I think resolved it in the end?

What VPS are you on?

[privsec]

@jdaviescoates I use netcup.

But if another vps is better I’d happily switch.

[avatar1024]

I use netcup too, I disabled IPv6 on the server entirely and since everything has been working with no issues.

Though disabling IPv6 persistently on reboot was not straightforward and had to be done modifying netplan config, see above on the thread (https://forum.cloudron.io/post/102554).