Cloudron Forum

I just stumbled upon Readeck, a read-it-later kind of service which is quite similar to Readwise, Instapaper, Omnivore, and the bunch. But also with some features I haven't seen elsewhere. Like the possibility to download content as epubs, for reading on eink-devices.

Still in early dev phase, but I still think this would be a great addition to Cloudron. According to the developer, features for RSS subscriptions are on the roadmap for v1.

@timconsidine Yes! That was actually the specific feature I was asking for when I got Readeck back as a suggestion.

I've used Uptime Kuna without any problem since April. But for the last 24+ hours I suddenly have started to receive tons of these:

The affected hosts are on .se, and one .social. Some of them are hosted at the same box I run Cloudron on, some on others.

I see that it's not the same error message as in the OP, but similar enough to be related?

According to my logs, my Cloudron was updated to 8.0.4 on August 28, and 8.0.6 yesterday morning. I don't know for sure, but from the graphs it looks like the problem started as soon as that update had been installed. This is what the week graph looks like for or the monitored services with problems:

Hi!

Would it be possible to add the AI starter pack as a Cloudron app?

@joseph That's right! I thought that was the easiest way to increase the deliverability of emails sent from my Cloudron server. But apparently my understanding of DNS is lacking.

I checked my VPS' ip address and it's not in any blacklists, so switching to the internal SMTP server.

@nichu42 Thanks, seems to have solved the problem!

@scooke Thanks! Added "Wait and see" to the "Reboot" and "Reinstall" options!

Hi!

I'm trying to import a podcast into a fresh Castopod installation. I've pasted the URL to the RSS feed, but the process is stucked on 'queued'. Searching Castopod's Discord, the proposed solution is to make sure the cronjobs are properly configured. But as far as I know, Cloudron usually adds all needed cronjobs when you install a new app.

Any ideas for what to do?

Thanks!

Ah, thanks! I’m just getting started with Git/Github, so wasn’t aware of that.

1.0 was just released. Would love to see this on Cloudron!

https://bonfirenetworks.org/posts/bonfire-social-1-0-is-here-back-the-community-funded-roadmap/

@d19dotca That was what I expected. Thanks for confirming.

Hi!

I'm using Arq Backup for a couple of clients. It has an option to send an email when a backup job finishes, which is good. But I would also like to get a notification if a backup job hasn't been executed for the last X days.

Is there any app on Cloudron that can be used for this? Assign an email address, and notify me if nothing has been received in a defined timeframe?

Edit: I just realised that Arq also can execute a script after a backup, so anything that could alert based on missing pings using GET/POST etc would also work.

But both the cli solutions are to be run locally, from my desktop? Or could they be used on GitHub as well?

@girish I just have one VPS at the moment. But it seems like I could use clone to try to restore the same app to another “instance” on the same server to verify the backups?

Solved! With a push monitor in Uptime Kuma and a curl script on the computers.

Hi!

I want to deploy an 11ty static site to Cloudron, and if possible build it and deploy everytime I push new content to the sites Github repo. Is it possible to push to this app from a Github account, or is it only push from a local repo that's possible?

I think the later, and if I'm right: Is there any other way to push a build from a Github account to some other Cloudron app?

/Anders

I'm trying to get sftp working, and since I don't succeed (seems like I can't figure out what password to use), I had a look at the log file.

Seems like there are a lot of brute force attempts going on. Is this a concern? Is Cloudron expect to add the IPs to a block list or similar?

2024-04-20T00:01:25.000Z 2024-04-20 00:01:25,325 sftp proftpd[95174] 0.0.0.0 (101.42.49.98[101.42.49.98]): SSH2 session closed.
2024-04-20T00:01:25.000Z 2024-04-20 00:01:25,590 sftp proftpd[95175] 0.0.0.0 (101.42.49.98[101.42.49.98]): mod_delay/0.7: no DelayOnEvent rules configured with "DelayTable none" in effect, disabling module<27>1 2024-04-20T00:01:25Z thoco sftp 1182875 sftp - 2024-04-20 00:01:25,590 sftp proftpd[95175] 0.0.0.0 (101.42.49.98[101.42.49.98]): SSH2 session opened.
2024-04-20T00:01:25.000Z 2024-04-20 00:01:25,590 sftp proftpd[95175] 0.0.0.0 (101.42.49.98[101.42.49.98]): mod_ldap/2.9.5: LDAPGroups not configured, skipping LDAP-based group memberships
2024-04-20T00:01:27.000Z 101.42.49.98 UNKNOWN - [20/Apr/2024:00:01:27 +0000] "USER root" 331 -
2024-04-20T00:01:28.000Z 101.42.49.98 UNKNOWN - [20/Apr/2024:00:01:28 +0000] "USER root" 331 -
2024-04-20T00:01:29.000Z 2024-04-20 00:01:29,342 sftp proftpd[95175] 0.0.0.0 (101.42.49.98[101.42.49.98]): USER root (Login failed): Incorrect password<27>1 2024-04-20T00:01:29Z thoco sftp 1182875 sftp - 101.42.49.98 UNKNOWN - [20/Apr/2024:00:01:29 +0000] "PASS (hidden)" 530 -
2024-04-20T00:01:30.000Z 2024-04-20 00:01:30,084 sftp proftpd[95175] 0.0.0.0 (101.42.49.98[101.42.49.98]): SSH2 session closed.
2024-04-20T00:01:30.000Z 2024-04-20 00:01:30,522 sftp proftpd[95176] 0.0.0.0 (101.42.49.98[101.42.49.98]): mod_ldap/2.9.5: LDAPGroups not configured, skipping LDAP-based group memberships
2024-04-20T00:01:30.000Z 2024-04-20 00:01:30,523 sftp proftpd[95176] 0.0.0.0 (101.42.49.98[101.42.49.98]): mod_delay/0.7: no DelayOnEvent rules configured with "DelayTable none" in effect, disabling module<27>1 2024-04-20T00:01:30Z thoco sftp 1182875 sftp - 2024-04-20 00:01:30,523 sftp proftpd[95176] 0.0.0.0 (101.42.49.98[101.42.49.98]): SSH2 session opened.

So the best option for now is just letting them knock on the door? And perhaps check the logs every now and then and add IPs from there to the blacklist?

As of this morning, my backups to Storj suddenly fails. This is the error message I get.

Error listing objects in snapshot/app_0c3fb7c9-77c7-4d96-a90a-b75b5d1562bf. Message: ListObjects(V2): listing too many items for gateway-side filtering using arbitrary delimiter/prefix HTTP Code: NotImplemented

Any ideas?

While researching some other backup problems, I just read the support docs and have a question about restoring email from backups: How would you do that when you have encryption turned on?